Change Formula To The Results Of The Formula For Cells That Have Results

May 9, 2006

I have a range that has formulas that are based on other fcells outside the range.

What I want to do is, if the cell has a value to remove the formula and paste the results. If the filed is blank (no results from the formula) to leave the formula in place.

There could be a marco to run when this process is needed.

I am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.

To get cell to display results of formula I must edit (F2) and hit enter. Is there an easy way to do this in bulk rather than editing and hitting enter on hundreds of cells?

Example of formula: =IF(COUNTBLANK(K2)=1,"",CONCATENATE("*** ",K1,": ",K2," "))

I have a long list (>1000) of increasing temperatures in column A. I use an array formula, {=MAX(A3:A1029-A2:A1028)} to find the largest change between two successive values. What I need to do then is obtain the two values that give rise to that difference (for instance, they might be in A678 and A679). I can't figure out a formula for this.

I can manage it if I insert a "difference" column in B, and use:

I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.

So basically I have a spreadsheet that tracks if a patient has turned in there required paperwork within the last 6 months and then changes the cell to white and lets me know how many days they have left until they are due to turn this paperwork in again. Then if it has expired I have a condition format change the cell to Red but I would like to add in the text EXPIRED to the cell. lastly I have Cells that have no data in them gray and I would like to add in red text saying No Paperwork.

I'm hoping this will be my last build of this spreadsheet so I can go ahead and start applying it to the real workbook [URL]

I am trying to find a formula that will allow me to reference another page in my spread sheet. In my scenario the row I am referencing has 5 consectutive numbers after the reference point I would use for a vlookup. These numbers are all zeros except for one number in each row which will be a positive number greater than zero. I want my formula to check the first cell in the row, if it is not a zero it will show that number, but if this cell contains 0, then it moves over to the next cell. If all the cells in the row have a zero, then i just want zero to appear on my summary sheet. I tried to do a vlookup with an IF function, but I couldn't get it to work. I have attached a sample of what the spreadsheet looks like.Example doc.xlsx

I've got an If statement in Excel which features several VLookups - I need the IF statement to return differing results to 2 different cells, is this possible?

In plain English, I'm looking for something like

If(Vlookup(A2, B2:D5, 4, False), C6="y" And D7="ok", "False")

I began to ponder a way to copy down cells so that the copying of the formulas results in references as shifting horizontally instead of vertically. One particular reason that this occurred to me had to do with my attempting to use Excel to make more orderly text copied from Adobe.

So, for example, if I copied text from Adobe, I would paste it in Excel. Thirty lines of text would past vertically into a column, from Row A1 to Row A30, with each line of text in its own row. I wanted to figure out a way so that in adjacent columns, I could put it so that I would have a set of formulas reading in =A1 in Column C cell/row 1, =A2 in Column D cell 1, =A3 in Column E cell/row 1, =A4 in Column F cell/row 1, =A5 in Column G cell/row 1, and so forth. I realized that if I copied this down, in the second row, the result would entail references to A2, A3, A4, A5, A6. I would prefer that the references update to A6, A7, A8, A9, and A10.

which results in a col and row number (such as D65).

The second cell has the following formula:

=INDEX('Zip Ranges'!$A:$B,MATCH($B$6,'Zip Ranges'!D1:$D$157,0),2) ^^ I wish to replace the 'D1" in the Match function with the results of the first cell's formula.

I assume Indirect would work, but I don't know how to code the formula to use it.

(the range 940:979 is a filled with investment funds data all within a particular sector, this formula for example will return the name of the number 1 rated fund, ie "mega star cash")

However, the above assumes that the ranges specified wont change, but they do, frequently and there are over 300 of them, so I earlier got help to create the following formula which can tell me what range a certain set of data lies within:

(so I tell this formula to look at a specified sector name 'cash funds' and by tweaking the number in bold it will return the range of data that i want to feed into the first formula, ie it will return D940:D979, DJ940:DJ979 and DG940:DG979)

If the data ranges change then these cells will dynamicaly update, either the range will shrink or grow - which is perfect - what i want to know is if i can integrate this into the first formula, so if you like it becomes completely dynamic.

I have created a simple SUM formula to add cell values across six sheets in the same workbook. I see the result when I use the formula button but the result (number) does not appear in the cell. All I get is $ -.

I am using this formula. How can I get it to pull 'Sales Materials'!$F17:$F69' and display along with 'Sales Materials'!$B$17:$B$69 when my logical statement is true.

=INDEX('Sales Materials'!$B$17:$F$69,SMALL(IF('Sales Materials'!$E$17:$E$69="YES",ROW('Sales Materials'!$B$17:$B$69)-16),ROW(A1)),1) I've tried using * but I think something is going on with "-16" which I was told to you use to account for headers.

I have a spreadsheet which matches Reference numbers in Column A against Column B and vice versa; and assigns unique or duplicate values. I would like to be able to count the number of duplicates and uniques giving a total of how many appear in the spreadsheet. I've attached the spreadsheet to give you an idea of what its like.

Hello, I cant figure out how to do this! I have a cell B2 that I enter a number in and in cell C2 I want it to add the number from B2 and add 15 to it. I can get the formula "=B2+15" and it works but I wont always have a number in B2 and I want it to say "0" and "0" would be in C2. Any ideas?

Is I have a VLOOKUP formula which results in a defined name- great! but when I reference that result in another formula I get a #REF error, if I type the defined name directly in to the formula (index btw) all works but I need the formula to recognise the referenced cell.

Example

=VLOOKUP(B8,Cable.Table,2) this results in a defined name of a table (D1A) in cell B30

The cell B30 is named "table". I then have another formula in B33 which is:

=index(B30,B47,C12) or =index(table,B47,C12) Which gives me the #REF error

If I input =index(D1A,B47,C12) the function works but it needs to be the initial reference from the result of the other formula and recognise that it is a defined name.

The formula in Col G uses the value in col's B:E. I would like a formula in Col G that will use the 4-digit value in Col F ( same values as Col B:E) and return the same results.

******** ******************** ************************************************************************>Microsoft Excel - PLAY 4 EVE MOSTLY.xlsx___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF1G1F2G2F3G3F4G4F5G5F6G6=ABCDEFG111/10/0966666666Q211/09/0977667766DD311/10/0977767776T411/11/0972467246S511/12/0977667766DD611/13/0978667866DSheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

I have 4 source workbooks and a master workbook which is linked to the source workbooks, if the source workbooks have no value in specfic cells the master workbook which is linked to it shows a 0 (not a problem). Now if I want to copy only cells which have a value other than the 0 to the end of used rows on another sheet on the Master workbook using VB I run into a problem because it sees 0 as a value and copies as well.

The issue is how do I stop the 0 showing and not being seen as a value. This 0 shows regardless of format.

I have a spreadsheet (attached) that has a formula, which calculates the number of days between two dates if another field contains data. My problem is that when I chart the data, it isn't showing up in the chart. Cell G1 (Tab 1) contains a 1 because the document was returned 1 day late. This isn't showing up on the Chart (Tab 2).

i put in a vlookup formula and it doesn't display any results, it just diplays the formula with the = sign in the cell. it does that with any formula i enter. i tried hitting it and everything.

I'm trying to enter relatively simple drug calculation formulas in Excel where the result is appended with the proper units to administer. For example, if I'm calculating for units of regular insulin with a formula such as:

=0.75*f2

I'd like the cell to make the above calculation, and append it with "Units Reg Insulin" or something similar. Thus far, I've just been putting the units as text in adjacent cells but the result looks a bit messy.

Is this possible? I'm using Excel 2007 and the Help index does not seem to offer much guidance about this.