Formulas Won't Disappear When Leave The Cell
Dec 5, 2011
I have a worksheet (in a workbook with many worksheets) where some of the cells display the formula I put in after I leave the cell. I've made sure that the cell format is General before I type anything in the cell. I've inserted new rows, above where the problem is and have tried going to another cell in a different part of the work sheet but I have the same problem. I use the same formulas in two other worksheets. The formulas include other worksheets in them. example =IF(PlotMaster!B2="","",PlotMaster!B2). I can't figure out what is going on.
View 1 Replies
ADVERTISEMENT
Feb 27, 2008
I need to create a leave tracker wherein i will get the names of the person who want to take leave in that particular month. I have prepared a calendar to make an entry. I need to take care of the following things
1) The person must have sufficient leave balance available to take the leave. so i have to first check if he/she has sufficient leave balance.
2) There are four team leaders and each team has around 13-14 members. so if lots of people from the same team apply for the leave then they will not be eligible for leave. this i want to know in percentage as to how much percentage of people are taking leave from that particular team.
View 5 Replies
View Related
Jun 24, 2014
Due to work, I need to creat the captioned file for our company.
View 2 Replies
View Related
Dec 15, 2009
I would like to do a routine in VBA on excel 2007 that makes the following:
1- When the mouse is over a cell it pops-up a window that shows a picture;
2- When the pointer is removed from the cell the window that contains the picture closes;
It is very important that the picture that is shown be adressed by a relative path from the folder in which is the excel file.
The pictures can change; this is the reason that the picture should be addressed by a path.
View 6 Replies
View Related
Jul 8, 2014
I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.
I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).
View 4 Replies
View Related
Apr 20, 2014
I have a 'Total' Cell (I23) that has the following Formula: =IF(SUM(D23:H23)>0,SUM(D23:H23),"")
But I would only like the formula to 'work' if another "Total" cell (I57) further down the sheet is Blank.Therefore if Cell I57 has a value, the Cell I23 is left Blank.
View 1 Replies
View Related
Nov 23, 2007
I'm want this formula, =IF($C30="Y",$A29+1,""), to leave cell A29 blank if cell C30 doesn't have a "Y" in it. If cell C30 does have a "Y" in it then I want to add one day to cell A29. Cell A30 should return 28-Feb, but in stead it returns 0-Jan.
************************************************************************>Microsoft Excel - 2007log.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA26B26A27B27A28B28A29B29A30B30C30A31B31C31A32B32C32A33B33C33=
ABCD2624-FebSat**2725-FebSun**2826-FebMon**2927-FebTue**300-JanWedY*310-JanThuN*320-JanFriN*330-JanSatN*Feb*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View 9 Replies
View Related
Dec 9, 2008
How is it possible to leave a cell in a set color, if nothing is entered in the cell? And is it possible to merge it with it with existing formulas allready in the cell?
View 4 Replies
View Related
Aug 25, 2009
Probably a simple method that i have not tried. I have a table where some cells are populated with #N/A. I am trying to work out a formula in another cell saying if the cell that contains #N/A then leave this cell blank.
View 4 Replies
View Related
Jan 16, 2010
Its probably very simple question, but i can not work it out.
I am trying to design a simple worksheet so I can keep track of how much money my room mate has paid me and what she owes. She pays $142 a week rent plus $23 a month for internet.
Please open the attached workbook. You can see in E7 and 8 there is a red negative number. This is because my tenant hasn't paid me yet for those weeks (D7 & 8).
How can i get these cells to read $0 or leave the cell empty?
The reason why I need this to read $0 or nothing is because it is messing up my next calculation in D3 where it works out how much she has paid for our internet bill.
Thanking you in advance. And sorry if this is a really daft question. Its probably something really simple i have missed.
View 9 Replies
View Related
Feb 22, 2010
Every time I think I've got this thing beat, they throw another curve at me!
If cell Q19 is blank, leave target cell blank
If cell Q19 is not blank, return the value of cell E$4
View 2 Replies
View Related
Nov 13, 2007
Each cell below contain a number and a time + ET. if like say i want to delete the time + ET and leave only the number inside all cell.
1.1425 8:20pm ET ON A1
3.0805 6:10pm ET ON A2
814.30 6:42am ET ON A3
798.70 11:27am ET ON A4
380.00 9:10pm ET ON A5
View 9 Replies
View Related
Feb 26, 2007
Excel Version: 2000
Workbook has the possiblities of 366 tabs at the bottom, but for a normal calendar year will only have 26.
The tab name is the ending date of the pay period without the year. So for Feb 25, 2007 the tab would be named 0225
On a yearly calculations page I am simply trying to say IF TAB 0225 exists then cell equals '0225'!A2 otherwise the cell should be blank.
I tried this, but gets a reference failure instead of putting nothing...
=IF('0102'!A2=0,"",'0102'!A2)
In this example the possible tab name would be 0102. If the tab exists, everything works fine, but since in this case it doesn't, I get a reference failure. #REF!
I NEED the result to be empty if the tab doesn't exist.
Any idea would be helpful. I'd rather not have 366 tabs when only 26 are needed for any calendar year.
View 9 Replies
View Related
Jun 18, 2014
cell A1 has the time (09:00), cell A2 has the minutes (60), cell A3 is the sum of A1+A2.
Im using this formula =A1+TIME(0,A2,0) - which is fine, except A1 is sometimes blank, so therefore I would like A3 to be blank.
I thought I could use this: =IF(A1,"","",(A1+TIME(0,A2,0)) But it doesn't work.
View 2 Replies
View Related
Mar 31, 2013
I am creating a worksheet for my buisness and I have input date of birth and have done a formula to work out ages but I dont know how to hide the formula and leave the cell blank so that when I create new information it automatically puts the age in.
View 1 Replies
View Related
May 9, 2009
I'm using a formula that I got from a previously made excel sheet. The formula does what I need it to do and looks like this: =INT((D10-10)/2)
The problem is, if I don't enter a number in the cell D10, all the cells with this formula show -5.
If I don't want data entered into D10 yet, I'd like all the cells with that formula to be blank until I actually enter a number in D10.
I think it has to do with using an IF statement followed with ""? Am I on the right track?
Also, if I have other formulas like =SUM(AP3:AQ6), but the cells it refers to are blank, how can I make the cell with the formula also be blank rather than show a 0?
I know I can turn off the "Show a zero in cells that have zero value" option, but I was wondering how to do it with the formula instead.
View 9 Replies
View Related
Apr 12, 2013
I would like to use the IF function so when cell B2 is empty, cell C2 will stay empty. the formula =MONTH(B2&C2) need to be used when cell B2 is not empty. this to convert text to number in column C
This is the result that I would like to achieve
A
B
C
D
E
1
MONTH IN TEXT
MONTH IN NUMBER
2
MAY
5
3
4
JUNE
6
View 3 Replies
View Related
May 9, 2009
I have 2 similar question.
I'm using a formula that I got from a previously made excel sheet. The formula does what I need it to do and looks like this:
=INT((D10-10)/2)
The problem is, if I don't enter a number in the cell D10, all the cells with this formula show -5.
If I don't want data entered into D10 yet, I'd like all the cells with that formula to be blank until I actually enter a number in D10.
I think it has to do with using an IF statement followed with ""? Am I on the right track?
Also, if I have other formulas like =SUM(AP3:AQ6), but the cells it refers to are blank, how can I make the cell with the formula also be blank rather than show a 0?
I know I can turn off the "Show a zero in cells that have zero value" option, but I was wondering how to do it with the formula instead.
View 9 Replies
View Related
Mar 31, 2007
A1 has a date of 03/10/07
B2 has formula =A1 + 7
I want to copy that formula down the column B2 but if
B3 is empty I get 01/07/1900
How Do I make so that if there's no date entered in
A column I get blank cells but still retain formulas,
I've been running into this issue with other formulas but I couldn't find any solution searching this forum,
View 9 Replies
View Related
Dec 19, 2007
The worksheet (Payments) contains a list that allows the user to input accounting transactions. Almost every input cell contains a formula or data validation enabling selection from a dropdown.
The worksheet feeds the data to 3 separate spreadsheets (Debits / Credits / VAT) and the formulas for that are contained within dynamic ranges in the other 3 sheets. A command button macro then feeds that data from the 3 sheets to the Master sheet. This all works perfectly.
After the macro is run and the data is copied to the Master sheet, I would like all of the data in the 4 other sheets to be cleared without losing the formulas and data validation, ie so that the sheets are empty and clear for the next batch of inputs.
View 5 Replies
View Related
Jul 2, 2014
How to leave a cell truly empty if the criteria of my IF statements is untrue. Currently, I'll write something like:
[Code] ....
But for some reason, when I copy and paste the resulting range of values elsewhere (to rid myself of the formula that determined them), the cells that did not return a value (where the statement is FALSE), are not recognized by a "Go To Special > Blanks" request, until I select all of the "empty cells" and clear them manually. Yet when I try to do a search on the same range for an empty space, I get no hits.
View 3 Replies
View Related
Mar 14, 2014
I need to sum cells that contain this formula: =if($c$5=0,"",c5*b5). I am getting a wrong data type value error.
View 7 Replies
View Related
Jul 23, 2013
I've been looking for a way to get the needed result without using macro but i think it can't happen. I'm using excel for forecasting
I need a formula or script to Vlookup a value for me from another sheet if depending on the date.
If the Today date is > then the Date mentioned in Cell A1+15 days i want A2 till A167 to run a formula that would lookup a certain value in another sheet and replace the current value in A2 till A167
For example
A1= August
A2 = 20
A3 = 40 ......
I want when im in 15 August a formula that will replace the foretasted quantity 20 with the real quantity found in sheet 2. If I am not 1 August i don't want the formula to run.
View 1 Replies
View Related
Jul 28, 2014
When i use
Code:
=IF(ISBLANK(I31);"";I31-IF(ISNUMBER(J31);J31;0))
The cell gives me an error, i think because I31 has a formula that returns no value.
How can i stop the formula if cell I31 gives me no data??
View 5 Replies
View Related
Nov 15, 2006
I have a spreadsheet in which I want to track the date and time someone made an entry in an adjacent cell (so if someone enters something in B2, I want the date/time of that cell edit to appear in C2).
When the date/time has appeared, I want it to remain the same and not update when the worksheet is opened the next time. So I can't use NOW to pull it in, because that's going to change every time the file is opened.
View 2 Replies
View Related
Jan 14, 2010
=IF(OR(A1>0,A2>0,A3>0),*2,"")
if A1,A2orA3 is greater than 0 then multpy by 2 or leave the cell blank
View 9 Replies
View Related
May 22, 2007
I'm trying to create a worksheet to automatically make a football league table update once results are entered. I have entered a formula using the "IF" function which compares scores and then awards points. However before a game is played and the cells are left blank, the formula detects this as a "draw" and awards a point. how to prevent the formula operating until a result is entered?
View 7 Replies
View Related
Dec 3, 2013
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
View 4 Replies
View Related
Nov 5, 2011
I'm trying to set up my formula so that if there is no criteria match, rather than returning 0 it leaves the cell blank.
(I recommend skipping the below text and just opening the attached spreadsheet, instructions/what I'm looking for and trying to achieve and well laid out requirements and examples are in the spreadsheet and much more thoroughly explained then I can do below)
I'm setting up a table that grabs data from columns in a raw data spreadsheet.
For the purpose of the table I'm making, the formula needs to match up both the House, and the year/month from the raw data sheet, then if the two match and are side by side, return the value to the right either in the Plan Field or the actuals field depending on which field in the table the formula is in. If there is no entry or matching criteria for both the house and Month then it should leave the cell blank, not show a 0
So I have a SUMIFS formula that I'm trying to set up so that if there is no criteria match it leaves the cell blank.
So =SUMIFS(sum range, criteria& range, criteria&range), if no matching criteria can be found, leave cell blank, else if matching criteria found then return value from the sumrange.
This is the exact formula I am using:
=SUMIFS(INDEX('Raw Data'!$1:$1048576, 0, MATCH(Table!$B9, 'Raw Data'!$1:$1, 0)), INDEX('Raw Data'!$1:$1048576, 0, MATCH(Table!$A$8, 'Raw Data'!$1:$1, 0)), Table!$A$9, INDEX('Raw Data'!$1:$1048576, 0, MATCH(Table!$B$8, 'Raw Data'!$1:$1, 0)), TEXT(Table!C$8, "yyyymm"))
Yeah kind of hard to follow, so attached is a very detailed and well laid out spreadsheet showing the example of what the formula is, how it's working/what it's returning and an example of what i want it to return/look like, so please check out the spreadsheet, it explains it a million times better.
Essentially though i want the formula set up so that if there is no criteria match, rather than returning 0 it leaves the cell blank.
View 3 Replies
View Related
Jan 16, 2009
I have 6 columns and would like to combine them. If the cell is blank the result should not leave a space.
- Prefix
- First Name
- Last Name
- Middle Initial
- Last Name
- Suffix
Example: Mr. Henry J. Weeks, III
Example: Henry Weeks
Example: Mr. Weeks
Example: Henry J. Weeks, III
View 5 Replies
View Related
