I NEED some code to convert a matrix to a singel column and it should be reversed to!
see attachment!
example:
FROM:
A1 B1 C1 D1
A2 B2 C2 D2
A3 B3 C3 D3
TO:
D1
C1
B1
A1
D2
C2
B2
A2
For a table like the one below produced for the sake of example (actual is much much bigger) I want to make it list rows that are true for a certain column for a certain variable in the matrix. So for say water terrain, which types of activity can I do i.e. swimming. Or for Offroad the activites which I can't do i.e. Run and Swim.
ActivityWaterRoadOffroad
Jog nym
Run nyn
Walk nyy
Swim ynn
y=yes
n=no
m=maybe
I have this code to take an area of data and perform the SUMXMY2 formula and output the results to another sheet. My problem is that the results are being outputted in a semi-matrix and i needed them in a column so i can them perform a sort. Is this possible and can anyone shed a light on the best way to do it?
View 2 Replies View RelatedI have an array of data with column headings and changeable row "item names"
in the left most column. The intersecting matrix of data contains quantity
values at the intersection cells of column and row headings. I need to
automatically reorganize the data as a list in a column with the row "Item
Names" at the left but and repeated as necessary but instead of the
additional columns of quantity values, I need to have this data listed in a
single vertical column along with an additional column with the original
column header that corresponds to the quantity value. I think there must be
some kind of lookup function to do this but I can't find the right way to do
it.
I have a data chart on 200 people with overlapping membership in 20+ groups, represeted as binary (1=member, 0=notmember), for example: ...
View 9 Replies View RelatedUsing VBA, I wish to work out the inverse matrix of a large matrix (100*100), but keep getting the # Num! Error. I am using the minverse function. I have defined variable as "variant", does this give me the same possiblities in terms of number size as the variable "Double"?
I have a matrix that looks like this:
1
2
3
4
5
6
7
8
9
10
11
12
And would like to rearrange this data to:
1
2
3
4
5
6
7
8
9
10
11
12
In actuality it's a 110000 x 3 matrix that should become a 330000 x 1 column.
I need a macro that allows me to select a matrix of cells and converts it into a single column elsewhere, pasting the second column below the first and so on. Is it possible to select the matrix, hit a macro key and then paste it in my selected location?
View 11 Replies View RelatedI have a 10x10 array that represents different cities that a travelling saleperson can travel to. Rows are cities designated as i values, columns are the same cities and represented by j values. I need to use a For, Next loop to determine the shortest distance (lowest value) in a given column. The i (row) that contained the lowest value is the first city to be visted and a boolean is entered for that j=i column, showing that the city has been visited. When pulling the minimum values from the column I need to ignore 0 values where the distance is between a city and itself. I'm having trouble coming up with a loop that takes identifies the i row with the lowest value that also ignores previously visited cities and takes the boolean into account. Maybe my Excel spreadhseet will clear up what I'm trying to do, The distances were generated using RANDBETWEEN(1,100).
View 8 Replies View RelatedI'm working on a sheet I have to complete and I'm blocked 'cause I'm not able to find the right formula to get the result I need.
I have a sheet that contains 4 columns with the following content (consider the following just as an example. The real sheet contains more that 25,000 rows.
User ID Repository 1 Repository 2 Repository 3
001FG x
001FG x
10GA x
20PK x
20PK x
20PK x
21CC x
4C1D x
Now, the table contains the user id (unique ID) and three columns that stand for the access right the user has for accessing a specific repository.
This means that a User can have more than one occurrence in the sheet because it could have rights to access different repository (i.e. the user 20PK can access all the repository).
What I should be able to do is to transform the table above to a new one with unique user id and the rights for each repository. I would need something like this:
User ID Repository 1 Repository 2 Repository 3
001FG x x
10GA x
20PK x x x
21CC x
4C1D x
How can I do this by using a formula and not a macro?
Below there are all the information needed to understand my problem.
M(1 to R,1 to C): matrix with R rows and C columns [element known]
M(i,j): elements of the matrix M in position i(row)-j(column) [element known]n
Here's a sample of the document I have, the original has several thousand entries, so figured for the sample I'd limit it. The raw data is on sheet 1, and sheet 2 is what I want to have to more easily manipulate the data. I started doing it manually, but I'm sure there's a far better method that I just don't know about yet. sample.xlsx
For those that don't want to download the document:
My data is like this:
ID1 Field1
ID1 Field2
ID1 Field3
ID2 Field1
ID2 Field2
ID2 Field3
ID3 Field1
etc.
What I want is this:
ID1 ID2
Field1 Field1
Field2 Field2
Field3 Field3
etc.
I need to get the fee value, if I write "Name" and "Time".
Please read the simple example file named "Fee from matrix".
Given one array variable (matrix n x n) M, I want to use the function sum, to sum along the rows.
I can use Application.WorksheeFunction.Sum(M)
but this will sum all the elements
and I would like smtg like this
Application.WorksheeFunction.Sum(M(1,)
Just sum the first line, or the i-th line.
I have code to create a correlation matrix (NxN, where N is the number of columns). This is done by selecting an area that is NxN, entering the function and range, then hitting ctrl +shift + enter (array formula).
However, I want to convert this to accept VBA arrays, rather than a data range, and give the output in form of an array as well.
VB:
Function CorrmatK(dataRange As Object) As Variant
On Error Goto 20
Dim r As Integer, n As Integer, rr As Integer, i As Integer, j As Integer, k As Integer, doit As Integer
Dim x() As Variant, mc() As Double, ss() As Double, m() As Double, ob As Object
r = dataRange.Rows.Count
n = dataRange.Columns.Count
[Code] ......
I have to create a matrix from columns in this format:
A1 A2 1
A1 A3 4
A1 A4 6
A1 A8 4
A2 A5 2
A2 A8 3
with a lot of empty cells (here, for exemple A1,A6 & A1,A7 ) and (A1,A2) = (A2,A1)
I'd like to have :
_ A1 A2 A3 A4 A5 A6 A7 A8 .....
A1 0 1 4 6 0 0 0 4
A2 1 0 0 0 2 0 0 3
etc
The source data is in the attachment. Would it be possible to do it automatically?
I'm trying to do the inverse matrix of a matrix captured by an inputbox, but it doesn't work
This is the code:
Code:
option explicit
option base 1
sub matrix()
Dim M() As Double
Dim B() As Double
Dim Y() As Double
Dim columnas As Range
[code]......
the error is: Error 13 the types do not match
I have a matrix A with 12 rows and 10 columns. My problem is if in the cell(i,j) there is data then the same data should appear in a similar matrix B, but in a cell which is 15 cells behind the cell(i,j).
That is it should start counting upwards from cell (i,j) in B and once it reaches the top of the matrix it should continue counting from the bottom of the immediate left column and go up. When it reaches the 15 cell from cell(i,j) in b, it should print there the value that was in cell(i,j) of A.
I am trying to figure out a better way to do my mileage for when I drive for work.
Currently I need to look at a sheet and see where I started and where I stopped and then I’ll see the distance.
Kinda look something like this.
Home
Work
School
Home
031Work
304School
140
What I would like to do is type in the “to” and “from” cell and have it automatically know the miles based on the chart above.
DateToFromDirectionTimeMiles3/4/10Home
Work
I wasn't able to attach the file because it was too big, but you can download it from here www.easygcc.com/correl.rar. On the sheet called " Correlation" there is matrix, I am baiscally trying to fill in the correlation formula into every cell so the matrix is filled out. The data for the correlation calculation comes from the sheet called "Tech Data". I have filled in the correlation formula into a few of the cells as an example, but I don't want to continue doing this manually but rather have a macro do it for me. Otherwise this will take for ever. My macro is also a part of the file, if you would liek to look at it and maybe fix what I already have.
View 4 Replies View RelatedI have a 5 x 5 matrix. When values are entered in 2 cell there needs to be a matrix lookup and the corresponding value needs to be entered into the 3 cell. Example :
- A B C D E
V 1 2 2 3 3
W 2 2 3 3 3
X 2 3 3 4 3
Y 3 3 4 4 5
Z 3 3 4 5 5
So if X and D are entered into the 2 cells the 3rd cell should show 4.
I would like to do the following transformation in excel:
imagine the following matrix:
1 2 3
4 5 6
I would like to transform this into:
1
4
2
5
3
6
This is a simple version of my matrix, in reality it is much bigger, and I do not want to copy paste each column by hand. Any ideas?
I'm trying to create a risk matrix like the attached example. I want to be able to enter a value and to have it to appear in the right quadrant.
View 2 Replies View RelatedI'm running a small messenger company and I've got a geographic area divided into five zones: 1,2,3E,3W,& 4
Deliveries within 1 zone will be charged for one zone.
Deliveries from Zone 1 to Zone 2 will be charged for 2 zones. Etc.
I've got a list of zones in my From column and also in my To column.
I need to write a formula that will give my customers the Zones Charged in a seperate cell.
I learned how to do something like this back in school, but don't even know what to call it anymore. Maybe it's some kind of comples IF function.
FREE Deliveries to anyone in Long Beach, CA to the winner!!!
On my example sheet it shows how many cables and how the cable length per job. What i need is for the hour/job column to be populated from the Hours sheet by matching the column and row. e.g 4 cables at 40 metres would give me cell D7 (27.89), as 25 metres would be no good - so rounding up would be required.
View 2 Replies View RelatedI need a function that can get, from a matrix, the first number that is higher than the number in a given cell.
View 9 Replies View RelatedI'm struggling to find the right Excel functions to fill up a block matrix. Here are all the details of my problem.
I have a list of firms and relative products. Each firm can produce either 1, or 2 or 3 different products, for instance
firm A produces product x
firm B produces products y and z
firm C produces product j
firm D produces products k, h and q
Suppose the data appear on a sheet in column order, that is, one column for the firms and one for the products with a space between A, B, C and D when one firm is a multi-product producer. I need to create a 0-1 block matrix in Excel setting 1 when the product is produced by the same firm and 0 otherwise, i.e. for the above example
x y z j k h q
------------
1 0 0 0 0 0 0
0 1 1 0 0 0 0
0 1 1 0 0 0 0
0 0 0 1 0 0 0
0 0 0 0 1 1 1
0 0 0 0 1 1 1
0 0 0 0 1 1 1
I can do this in VBA but not in Excel, and unfortunately I need to provide an Excel solution.
I need to convert a Matrix to a Table. Something like this:
Input file:
Capture1.PNG
Output :
Capture2.PNG
I have a set of 4 columns with YES/NO statements in them.
I need to find any YES strings, of three or more, within one column, uninterupted by a YES in another colum.
EXAMPLE:
_____A ___B__C__D__E
1 1/1/2008 YES NO NO NO
2 1/2/2008 NO NO YES YES
3 1/3/2008 YES NO NO NO
4 1/4/2008 YES NO NO NO
5 1/5/2008 NO NO NO NO
6 1/6/2008 YES NO NO NO..................
I have a spreadsheet with M-1 rows and N colomns. I want to calcolate the covariance matrix of the spreadsheet and i would like like output an other spreadsheet. I tried to do my self, but no so much result. here my code, but there is a mistake
View 14 Replies View Related
