IF Statement Logic In Columns - True / False

Mar 31, 2014

Column A: T/F
Column B: True/False

Here's what I want in a sentence: If one of the cells in grouped row is "T", column B = True, if not then column B = False.
(row groups are separated by a blank row)

Example)
Col A,Col B
TTRUE
FTRUE

[Code] ....

I came up with following formula:

=IF(MATCH(TRUE,INDEX(ISBLANK(A1:A17),0),0)>MATCH("T",A1:A17,0),TRUE,"")

It checks to see if blank cell is found before "T" but it doesn't look rows above.

inincubus.grouprows-1.xlsx

If Statement - True False For Duplicates

Aug 22, 2014

On sheet 3 column d i have a vendor number. I am trying to create a formula in column M (same sheet) that will say "True" if the vendor number in column d is also listed on sheet 2, column A (Rows 2-148)

If Statement With Multiple True But Only One False?

Jun 16, 2012

Write if statement or any other formula: if cell C3 is less then 0 then "over due", if = 0 then "due" and if more then zero then "not due yet" otherwise preferably nothing, because that would mean that the cell is empty.

IF Statement: Just Returns FALSE, Despite The Result Being True

Dec 29, 2008

I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.

I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?

=IF(AND('Raw Data'!\$J:\$J="Maintenance",'Raw Data'!\$I:\$I="Open",'Raw Data'!\$G:\$G="1-2008"),COUNT('Raw Data'!\$C:\$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.

IF/and Statement To Give Back A True Of False

Oct 2, 2007

I'm looking to use an if/and statement to give back a true of false but it doesnt seem to be working, I'll give an example, I want excel to search a set of cells to see if its blank and another cell to see whats written there(from a pull down menu) and if both of them are true I conditionally format to go green, otherwise stay white. It works for one cell, condition below:

=AND(Anoop!B3="IIC",NOT(ISBLANK(Anoop!C3)))

but I cant get it to do this
=AND(Anoop!B3:13="IIC",NOT(ISBLANK(Anoop!C3)))

i.e search the entire column

I was also wondering if it was possible if it found an "IIC" in B8 how I could get it to check C8, D8 etc..

Count Of TRUE & FALSE And Assign 1 To True And Yes And 0 To False And No When I Total The Rows

Nov 15, 2006

I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.

Find The Matching Text TRUE/FEE Or FALSE/FEE In Columns

Dec 8, 2006

I have 2 sheets. On one sheet, this column J2:J490 contains text that either says "TRUE" or "FALSE" and another column AJ2:AJ490, text that says "FEES". (many of the other cells in this column say something else). I need a formula that can find the matching text TRUE/FEE or FALSE/FEE in these columns, count them, and give me the product.

Hide Checkbox TRUE/FALSE & Sum Values Adjacent To TRUE

Aug 2, 2009

I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.

I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF(\$B\$1:\$B\$3,True)*3

I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.

YES/NO Instead Of TRUE/FALSE

May 29, 2009

Is there another formula that I could use that would return YES or NO instead of TRUE or FALSE? This is the formula that I am currently using.

True Or False

Nov 8, 2009

I guess the answer for this is simple but can't find the answer.

AB1FALSE IF TRUE THAT A4 = TEST12TRUE IF TRUE THAT A4 = TEST23FALSE IF TRUE THAT A4 = TEST34TEST2IF ALL ARE FALSE = ""

Excel tables to the web >> Excel Jeanie HTML 4

Using IF Statements To Get Value True Or False

Apr 2, 2014

In Column A I have the following values below.

Y
Yes
N
No

Questions how do you created a formula, Example If Cell A2 = Y or Yes Cell B2 will be 1, if not then 0.

Currently I was successful in writing this formula =IF(BB2="Y","1","0") but this formula only returns the value for Y, not Yes

ScreenUpdating :: False Or True?

Jan 5, 2007

I am using the following code in my Macro

Application.ScreenUpdating = False (I set it to "True" at the end of the sub)

But I can still see Excel changing tabs etc.

True/False Datatype

Jul 14, 2008

when you type True into a General formatted Excel cell Excel returns TRUE. This value cannot be formatted to a 1 (or a -1) by applying a different format. Thus, does Excel have a boolean data type? Or is it something else like a numeric value that for whatever reason is not receptive to format changes.

'IF' Function - True/False To Yes/No

May 30, 2006

created my 'IF' function with the 'True/False' statements, but i am wanting to have yes/no instead and i cant figure out how to do it.

Calculations Via True And False

Feb 1, 2008

I am currently looking at the workings of a spreadsheet designed by someone else.
Within this sheet, a cell has the formula that , once broken down, equates to:

=100*TRUE (Cell returns a value of 100)

And another that equates to :

=100*FALSE (Cell returns a value of 0)

Am I correct in thinking that TRUE always equals 1, and FALSE always equals 0? I think this is right, but just need someone to confirm.

Number Comparison And Logic Statement

Feb 8, 2007

I'm having a problem with coming up with a suitable excel formula. I have a table that calculates 2 values. Once these values are derived I need them to be compared to a separate table. This is how it works.

Table 1:
Cell B8 gives me total weight: 3187pounds
Cell C9 gives me the center of gravity in inches: 142.02

on sheet2
Table 2: Cell A2-A26 have weight increments every 50 pounds starting at 2200.
Cell B2-B26 have the minimum C.G. limit
Cell C2-C26 have the maximum C.G. limit

My question is how can I write a formula that takes the weight from B8 and compares it to the cells on sheet two (rowA) and finds the closest weight. Then from there finds out if my C.G. from C9 is within limits of my min and max values?
Sounds complex but it's not that bad. I'll upload the file to my website and let people download if they'd like to see it.

ActiveX - True / False Checkbox?

Sep 5, 2013

I've done a check box on excel (ActiveX) which then enters True or False when I tick or untick it. Is there any way which you can change the True/False words to something else?

For example, if the box was ticked it would enter "Electric" instead and "N/A" if the box was unticked?

Multiple True Or False - Sum Of Corresponding Cells

Dec 4, 2013

I've got a mega excel sheet right now with multiple people making updates to it on a daily basis. As such I am trying to find a way to output various totals in a separate static table which i can grab at any point and be confident numbers are correct.

The problem, firstly I cant figure out how to have multiple true false formulas checking the sheet from 1 cell. i.e "Check column B True/False for RestrauntNameXYZ + Check column E for true/false GroupABC + check column G for true/false Lunch"

and then

Calculate sum of column A for all rows which above combinations of true/false checks spit out.

True And False - Range Criteria

Feb 8, 2014

I have a list where from which a summary is made but i need true / false thru formula once it is confirmed that it is reconciled with main data.

I have attach a sheet and explain what i needed in red highlighted.

Book1.xlsx‎

Converting Numbers To TRUE Or FALSE

Apr 29, 2014

I have numbers from -50 to 50 going down column C. In column D, I want to enter a formula which will convert each number to a TRUE or FALSE. How do I do that?

I believe 1 = TRUE and everything else = FALSE, but I would like to know how to get that with a formula.

Change True Or False To Text

Jan 27, 2009

i have this formula and need to change true and false to text for both the expressions
=OR(E23<=DATE(YEAR(\$L\$2),MONTH(\$L\$2)+\$J\$2,DAY(\$L\$2)),(\$L\$2>E23))

what im trying to do is e23 has a static date (food sell by dates)and if that date gets within 3 month (J2) period of todays date (L2) i want it to say "warning" if e23 is equal to or older than todays date i want it to say out of date.

L2 has =today()
J2 has the number of months in it for the warning

True Or False To Disply As A Sum Total?

Mar 4, 2009

Hi, I am doing a spread sheet for work and just have a little issue. I have two time fields in the spread sheet and if one is less then the other it reads true and turns green but if it�s greater then it reads false and goes red. Is there a way of it to say how much the time is under or over the original instead or just reading true or false?

Make OR() Return 0 Or 1 Instead Of True And False

Sep 11, 2009

Hi. Is there a way to make OR() return 0 or 1 instead of true and false?

Or to convert true to 1 and false to 0?

Match And Return A True False Value

Sep 25, 2009

I have a master spreadsheet which shows agreeed rentals for vehicles, on the sample this is the "OCS" tab. I receive a spreadsheet which contains the actual rental charged, in my example this is the tab "Invoice" in my example the VRN are in the same order on both sheets, in reality the invoice spreadsheet is not in the same order as my OCS sheet. My task is to match the VRN field in the invoice sheet to the VRN in the OCS sheet, then look at the amounts and if they match then return "true" if they don't return "false

True Or False If Number Lies Between A Certain Value

Apr 8, 2014

I have an Excel workbook which has 10 rows of numbers with a min of 20 and max of 30. The random number lies in column B and this will be tested to see if it lies between the min and max. I need to loop this 10 time over

I first started out declaring the 3 variables and assigning values to each variable. It works if I assign a value of 22 for Number but I want VBA to see the Number and make a decision (True or False) if that number lies within the range of 20 to 30.

Should I name the Number variable as a variable because its value will change depending on if it matches the conditions? Also would a case be easier? Between.xlsx

Using VLookUp To Return True Or False?

Feb 21, 2014

If a value in cell A1 on Sheet Report is found in Range B2:B10 on Sheet Hierarchy Then return True Else False

I have the following so far:

[Code] .....

I want Match to be either True or False. Also, is there a way to know the cell the value was found in if True? How do I make this work?

Checking If Cell Value Is True Or False

Mar 27, 2009

I have a cell in Excel having a boolean value and want to use a macro to check if it is true. Something like this:

Counting True And False Statements?

Dec 28, 2011

How do I get my excel spreadsheet to keep a count like 1 of 54 from column A (which is only going to put out values of True or False)?

These values are not always going to be in succession. Currently I want to track A2, A7, A11, A21, and A30 and I want the output to state 0 of 5 and count up from there when I change the values to True like 1 of 5, 2 of 5 and so on.

True Or False Return For Each Group

Sep 4, 2007

I have no idea where to begin on this problem.

Group Name / Data
A / .01
A / .02
A / -.02
B / .05
B /-.01
C /.02
C /-.03

I need one true or false return for each group if the absolute value of the differences in any combination of a group's data is greater than or equal to .05.

Expected Result

Group A False
Group B True
Group C True

How To Covert The Value Of A Checkbox From True/False To 1/0

Dec 24, 2008

I have searched all through the threads but I can't find anything similar to my problem. I am trying to create a checkbox that when the excel file would be saved as a *.csv file, the value for the checkbox would be saved as an boolean value 0/1. I created a macro that would populate the cells with the form control checkbox and linked it to the respective cell, I just need to change the value.