ISTEXT In Array SUM
Jul 31, 2009
I have a workbook with worksheets named by peoples names. There are cells in my summary sheet that contain all the names of the worksheets (or peoples names).
Each worksheet has a table in it that I am trying to search one column to find a specific name and then report if there is text in another column in the same row. If I use the following formula:
=IF(ISTEXT(INDEX(INDIRECT("'" & E$4 & "'!f10"),MATCH(INDIRECT("A11"),INDIRECT("'" & E$4 & "'!h10"))))=TRUE,1,0)
It works and I'll return a "1" for cells in column F that have text and a "0" for columns that don't.
However, I am trying to sum up the cells in F that have text and when I enter:
{=SUM(IF(ISTEXT(INDEX(INDIRECT("'" & E$4 & "'!F10:F200"),MATCH(INDIRECT("A11"),INDIRECT("'" & E$4 & "'!H10:H200")))),1,0))}
it returns "1" when that should not be the answer. Am I doing something with the array in my INDIRECT formula? I used this similar application for another purpose in this workbook and refereced the array through INDIRECT the same way (but didn't use MATCH or INDEX) and it worked fine. This was the formula:
{=IF(SUM(IF(INDIRECT("'" & C$4 & "'!H1:H200")=INDIRECT("A5"),1,0))>0,SUM(IF(INDIRECT("'" & C$4 & "'!H1:H200")=INDIRECT("A5"),1,0)),"-")}
View 9 Replies
ADVERTISEMENT
Jan 28, 2010
I am summing 3 cells, A3, A4 & A5. Cells A4 and A5 may contain text. I want to write a formula using the IF(ISTEXT funciton which says something like this:
Sum(A3:A5), if cell A4 and A5 contain text then sum just A3. If only cell A5 contains text then sum just A3:A4.
Im not sure exaclty how to construct this.
View 9 Replies
View Related
Mar 15, 2009
I have this formula in a cell: =IF(ISTEXT(F5),F4,""). The problem is F5 is visually blank and has this formula =B3. so it returns F4. Is there a way to rewrite the formula or to use another formula, so it will return blank?
View 2 Replies
View Related
Mar 20, 2014
I'd like to search a cell A1 containing for example 'hello_L765'. If the 7th character is L and the 8th character is text(ie not a number) than display yes, otherwise display the 7th character.
View 3 Replies
View Related
Jul 5, 2007
I'm currently designing a new spreadsheet and I can't change the formula I'm using below to search more than one cell or a range. Is either choices a option?
I'm using =IF(ISTEXT(E135),G135) Can I add cell E139 (and how many additional cells could be added) or can I set it up to search E135:E144.
View 13 Replies
View Related
Jun 23, 2014
I have a rota sheet whereby shifts are written in as start time, finish time, and then a calculation for the hours.
At the bottom I have another SUM formula to calculate total daily hours.
However, within the total personal hours I have a VLOOKUP formula to check if the start time cell has a holiday text reference.
Please see below:
Take the "Sergei" example: he starts at 9am, finishes at 8pm, and the formula automatically calculates an 11 hour working day.
However, in the "Tom" example, the "TH" refers to another sheet which houses a reference of the amount of hours to place in the total hours box if those letters appear, thus imputing holiday hours at the same time.
"=IF(ISTEXT(F24),VLOOKUP(F24,'Hol-Meet Hours'!$F$7:$G$27,2,0),(G24-F24)*24-IF((G24-F24)*24>6,0,0))"
What I am struggling with is to use an IF and ISTEXT formula in the "Daily Hours" formula to ignore any holiday inputs, thus only giving me trading hours.
The only way I could think of doing it was something along these lines:
"IF(ISTEXT(F16),SUM(F17:F31),SUM(F16:F31)...et al"
The issue here is that I need to repeat the formula for every staff member within the same cell's formula, which I don't know how to do (multiple functions within a formula repeated 20 times), and is a right drag.
View 5 Replies
View Related
Nov 12, 2009
I'm trying to apply the istext to a cell that has multiple values eg: [car, boat, truck] so I have setup the cell with the formula
=istext(c147 = "car",1,0)
it returns false constantly. Is that becuase of the other values separated by comma's in that same cell?
Is there a way to do this so that I don't have to go through 300+ cells that have multiple values to separate them?
View 9 Replies
View Related
Feb 21, 2010
I've been trying to use excel's Isnumber or Istext function to evaluate a range of cells, but have been unsuccesful so far. Is it even possible? or is the formula just restricted to evaluating only single cells?
For example, if I do, Isnumber(A1:A10), is there any way to make that work?
View 9 Replies
View Related
Jan 13, 2005
I am trying to create code that deletes lines in a spreadsheet when the first column is either blank or has text in it. However, when writing the VBA code, ISNUMBER and ISTEXT do not work. Amazingly, ISBLANK does work.
View 4 Replies
View Related
Mar 24, 2009
I have 4 cols, x rows. I need Column C to check Column B for a numerical value, and if true, return the value in B, and if not true, then return value from A. Column B are functions formatted as general. The reference made by Sheet2!B is numbers formatted as text as to retain leading zeros. Here is what I have so far
=IF(ISBLANK($B10),$A10,$B10)
View 5 Replies
View Related
Dec 3, 2012
I'm trying to validate a cell in Excel 2007 that should contain only two letters.
Formula:
Code:
=IF(AND(LEN(A1)=2,ISTEXT(A1)),TRUE,FALSE)
When the value of A1 is JK, the result is TRUE
When the value of A1 is 12, the result is FALSE
When the value of A1 is 3K, the result is TRUE
When the value of A1 is K3, the result is TRUE
When the value of A1 is 123, the result is FALSE
When the value of A1 is JKL, the result is FALSE
When the value of A1 is 3, the result is FALSE
When the value of A1 is K, the result is FALSE
The LEN function works as expected, but the ISTEXT function does not, whenever the cell contains a number and a letter. I've tested the LEN and ISTEXT functions separately, and get the same results.
Is it me, or is it Excel?
View 7 Replies
View Related
Apr 4, 2009
was workin' on a text recognition question with someone here:
http://www.excelforum.com/excel-new-...ml#post2071064
and another user posted this:
View 4 Replies
View Related
Jul 30, 2012
in C a string is nothing more than an Array of characters ending with a null character.
in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:
When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?
Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.
Now I can use
byteArray() = StrConv(unicodetext,vbFromUnicode)
to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?
Using an integer array does not work other than through
intArray(j) = CInt(AscW(Mid(Outp, j, 1)))
which fails on the nullstring in my encrypted text.
I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.
View 1 Replies
View Related
Sep 9, 2012
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
View 6 Replies
View Related
Dec 20, 2013
I need to export this to Xcelsius which doesn't support any macros/vba. Btw I can;'t use Row() in xcelsius too.
[Code].....
View 4 Replies
View Related
Oct 2, 2008
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies
View Related
Apr 7, 2009
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View 6 Replies
View Related
May 2, 2013
I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
View 9 Replies
View Related
Aug 5, 2014
I want to pass an array to Offset in the "Height" parameter, without having to type the array.
{=MAX(SUBTOTAL(9,(OFFSET(A1,ROW(1:5),,{1,2,3,4,5}))))}
I can't seem to figure out how to build the {1,2,3,4,5}. I've tried another ROW(1:5) and have tried nesting that like N(ROW(1:5)) but nothing works.
How I can get the {1,2,3,4,5} without having to type it out (so that I can expand this to a larger list)??
View 8 Replies
View Related
Aug 26, 2009
I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method
IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE")
I then copy and paste 'values' and filter out the 'false' to get my final result.
This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value.
This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.
View 6 Replies
View Related
Jun 21, 2014
wondering is there a VBA equivalent of --() in excel that turns trues and falses to 1's and 0's?
View 14 Replies
View Related
Nov 6, 2013
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
View 5 Replies
View Related
Nov 15, 2007
=CORREL(C1:C10,C12:C21) at H1
=CORREL(C1:C10,C23:C32) at H2
=CORREL(C1:C10,C34:C43) at H3
etc
can i have a macro that first array remain the same, and second array always 11 cells added. drag it down also can
View 9 Replies
View Related
Mar 22, 2007
I've tried to multiply each element in a 6x6 array by a similar 6x6 array, both on the same sheet, and it worked.(see Macro2 and attached xls file "Test").Then I got more ambitious and tried to do the multiplication from a standard array in sheet "TestA", with the result on the same sheet, by each array in sheet "TestB" and failed.How do I solve this problem? Pgualb PS:I'm using the R1C1 style.
Sub Macro2()
For y = 29 To 34
For x = 2 To 7
Cells(x, y) = Cells(x, y - 27) * Cells(x, y - 18)
Next x
Next y
End Sub
Sub Teste12()
'Multiplica matriz em TestB por matriz padrão em TestA com _
'resultado na matriz em TestA correspondente à matriz em TestB
'
Dim x, y As Integer
For y = 2 To 7.............
View 7 Replies
View Related
Aug 15, 2014
Assume that I have in Sheet2 a list of CUSTOMIZED name.
[Code].....
Now in Sheet1, I have data in column A that has strings consist of the customized name.
For example
[Code] .....
What function should I use that could give me the result of the CUSTOMIZED name?
I was thinking of a formula i.e.
[Code] ......
Obviously, the above formula give me error. Even if it works, it'll not give me the customized name ...
View 3 Replies
View Related
Nov 28, 2011
I'm new to arrays. They seem promising for what I want to do though...
Heres where I'm at. I have some data like this:
items freq 1 0.5 2 0.5 3 0.5 4 0.25 5 0.25 6 0.125
Now, I've created a 2 dimensional array, as such:
Code:
Sub testarray()
Dim arr1 As Variant
Dim rng1 As Range
Dim lngX As Long
Set rng1 = [A2:A6]
ReDim arr1(1 To rng1.Count, 1 To 2)
For lngX = 1 To rng1.Count
arr1(lngX, 1) = rng1.Cells(lngX, 1)
arr1(lngX, 2) = rng1.Cells(lngX, 2)
Next
End Sub
Now, what I need to do, is create an array for each freq of all the items that share that freq. Essentially I need this:
0.5 {1,2,3} 0.25 {4,5} 0.125 {6}
Now, I was thinking, if I could create a dictionary object and make the key the freq (so my keys would be 0.5,0.25,0.125) then I could assing the "item" an array (or another dictionary) holding the items that apply to that freq.
View 9 Replies
View Related
May 18, 2007
I just wanted to concatenate a few cells using an array formula like this:
{=SUM(IF(B2:J2="";0;B2:J2))}
Well, this does not work. I have no idea why it fails. Any solution to this without scripting?
View 9 Replies
View Related
Jun 30, 2006
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
View 4 Replies
View Related
Jul 11, 2007
On one sheet (KPI) I have either the values "x" or "" in the range A84:A89 to mark wheter to use the corresponding project in the range B84:B89. On the sheet X-ref I have the same project names in range T4:Y4 and a corresponding target value in T8:Y8
What I want is the sum (or average) of the marked-projects target-values. The result should end up in KPI!G31.
In other words I want
=sumif(A84:A89;"x";'X-ref'!T4:Y4)
but it doesn't work since the first range is an column-array and the second range is an row-array.
View 5 Replies
View Related
Feb 11, 2008
I'm trying to use an array to carry out string function on a range of excel cells.
Here is the code I am using
Dim arrXl As Variant
arrXl = ws.Range("F1:F" & ws.Range("D1").End(xlDown).Row)
For i = LBound(arrXl) To UBound(arrXl)
MsgBox (LBound(arrXl))
'If 1st char is different from 3rd char then remove all of string after 1st char
If Left(arrXl(i), 1) <> Mid(arrXl(i), 3, 1) Then
arrXl(i) = Left(arrXl(i), 1)
End If
'If 1st char is different from 7th char then delete string after 5th char
If Left(arrXl(i), 1) <> Mid(arrXl(i), 7, 1) Then
arrXl(i) = Left(arrXl(i), 5)
End If
The lbound function returns the value of 1 as the lower bound, I do not have "Option base 1" set so I was expecting the lbound value to be 0. The first 2 cells in the F column are blank so this may have something to do with it, I am unsure if cells in excel can be null if they can be null one cell may be null and the other may be a zero length string but I am unsure about this.
The ubound function returns a value of 487.
The code breaks when I try to access an element in the array so it breaks on the line:
If Left(arrXl(i), 1) <> Mid(arrXl(i), 3, 1) Then
and returns the "Subscript out of range" error message.
View 5 Replies
View Related
