If Word Not Found Then Macro Will Skip And Continue?
Apr 18, 2013
I want to a macro to start of with a Find method Eg Account..something like this
Cells.Find(What:="Account").Activate
Account could be in any row or may not be in the document.
My problem is when it is not in the workbook my macro will come up error. how to recode my macro to fix this.
Dim Finder as string
Set Finder = Cells.Find(What:="Account",...............
'Problem here
'
If Finder is not found then skip till next part of macro.
If it is then just select the Cell and I can work of that.
Also Can I do a Find formula to Find Either 'Account' Or 'Debt' Or Asset'?? Just want to know save me copy and pasting it down to change a name.
I am using a statement to step through a list of filenames in a list using the following syntax:
For Each filename In selection
.....
Next Occasionally, the filenames I add to the selection range do not appear in the source folder. When this happens, the macro throws up an error message and stops. If no match is found, I want it to automatically skip to the next filename in the list. I know there is a way to do this, I just do not know the syntax for achieving this.
This is how I think part of it is done, using the .Find statement:
For Each filename In selection
Workbooks.Find filename: = "...blah blah .."
Next
If no match is found, the statement is False, and I then need to add another statement to tell the code to skip to the next in the list if the filename does not appear anywhere in the selection range/list.
I need my macros to search for the word "Cancel" or "Cancelled" in columns "T" and "U". Once found, I need the macros to make that entire row an opaque shading.
There will be other wording in these cells that contain "Cancel" or "Cancelled". Is it possible for the macros to search in the sentence and find the words "Cancel" or "Cancelled"
I'm using the following formula "=HLOOKUP($B$4,Arg!$D$10:$DA$50,5,FALSE)" With Cell $B$4 as the 'Lookup_value' I wish to pull the second instance of the 'lookup_vlaue' not the first from within the 'Table_Array'. Later on I'd like to skip to the 3rd column/instance etc. It's not practical for me to change the size of the 'Table_array'
I have an Excel Worksheet with 80,000 lines on it. The Columns are arranged thus:
Col A Col B Col C Col D Col E Col F
Code Description Cost Rate Mobile
0.13
1234 Australia Mobile 0.12 Not Mobile
[Code] ........
I am looking for an Excel Formula that will look up Australia & Mobile and then return the highest value of the range of cells it finds that meets that criteria and enters that value in the Rate column next to mobile (F3).
Then I just want a variant of the same formula that will look up Australia but exclude Mobile and then return the highest value of the range of cells it finds that meets that criteria and enters that value in the Rate column next to Not mobile (F4).
I would like to use the following code to see if the word "reservoir" shows up in any of the rows in a certain column. If it does I want to insert the formula = SUM(D7:D257)*0.1 into cell C2 and if it doesn't then I want to put a 0 into cell C2. I've tried many routes but can't get past the error if it can't find the word.
Basically in B3 I have number 1. I want a macro to go to the next empty cell down and continue the series, i.e. 2. Then if it is ran again it will go to the next cell down and put in 3. This is what I want it to do only I don't want it to reference ranges. I added the offset line in but still need to know how to autofill to the nex line down..
I have 10 worksheets in my workbook. The two that I'm concerned with in this post are "Main" and "Completed". If Column AA in "Main" contains the word "Complete" (which is from a drop down list) I want to copy the entire row from "Main" and paste in the "Complete" sheet without over-writting previous pasted rows.
Back in sheet "Main" I want the data in that row to be cleared with the exception of Column A as it contains a formula for sorting blanks. If I delete that row it will mess up my links on other sheets.
I have two different functions, first is importing website to excel and the a second is testing string according to pattern. Each one of them is working ok. I'm trying to find a word " finance" in URL and put it into cell "A1".
Sub ParseWebsite() Application.DisplayAlerts = False On Error Resume Next For i = 1 To 10 SiteURL = "URL;http://www.cnn.com" With ActiveSheet.QueryTables.Add(Connection:=SiteURL, Destination:=Range("A" & i)) .FieldNames = True .RowNumbers = False .FillAdjacentFormulas = False................
Looking to find 1 of 2 words in a cell in column B and return the word found in the same row in column E. This seemed easy but I am not having any luck.
the cells in column B have several words in them but I am looking for 2 specific words "PLAT" and "ORIG". If the word is not in the cell, it should show a blank cell in column E in the same row, otherwise one of the 2 words should be in that row in column E. A VBA loop would be ideal but a formula that can do it might work as well.
I have a file with over 20,000 rows that contain a date (Mon~Sun), What I need to do is remove every day that contains Mon~Sat and only keep Sun, this is the code that I have come up with and is working.
Code: Dim c As Range Dim SrchRng Set SrchRng = ActiveSheet.Range("A1", ActiveSheet.Range("A" & Lastrow).End(xlUp))3
I have a macro that pulls in data from many workbooks. If there is no data in one of the workbooks the macro will not continue. Is there a loop or some other coding I need. The code for one of the worksheets is: (I am new to excel and know there must be parts that can be deleted in the below
I have been able to put together a pretty hefty MACRO. I found out that some of the files I am importing may result in no data due to the manipulations I am doing. This causes a problem when I try to subtotal the data on each sheet. Is there a way to have the MACRO delete a sheet if cell a2 is blank and then continuw with the rest of the MACRO?
I am having a problem with a custom funciton I am trying to create. It will exit after it is finished with the IF Then Else statement. I need it to continue onto the Do loop at the bottom that does all the work.
Function UPCECheck( num As String) As Long Dim CheckNum As Long Dim TempCheck As Long Dim X As Long Dim Holdtxt As Variant UPCECheck = 0 CheckNum = 0 Debug.Print Len(num) If Len(num) = 12 Then Holdtxt = num ElseIf Len(num) < 12 Then Holdtxt = "000000000000" & num Holdtxt = Val(Mid(Holdtxt, Len(holdtext) - 12, 12)) End If...................
I have been using various bits of information from all sorts of threads and made a somewhat nifty little Macro program for the company i work for.
The following threads may have my answer in them, but I can't see it or figure out how it could be restructured to my needs.
Disable Read-only Message Box
looks as if the file is set as readonly then to close it without saving
[url] [url]
contains a msgbox I would like to add in, specifying that the file is read only therefore to abort current macro for particular file
concerns very much the problem I am having.
Basically what it boils down to is,
My Program Manager runs a daily report, then uses my program to update up to 7 different workbooks. Each having their own Sub program.
Some of the Supervisors or leads gets in to early and thus makes the file as a Read-Only, which of course stops my program and can not continue.
What I would like to learn is.. (from the countless threads I have looked through, I can't seem to find the answer)
Bring up a msgbox, informing the PM that a specified file is already open and therefore this particular process has been aborted.
Then it will move on to the next Sub, and so forth...
I want to thank everyone for their help directly or indirectly, (been reading threads for about 9 months now) and any future help as well.
And if it's not to difficult, could it be close to layman terms? I try to understand alot of these codes and I get lost with some of the wording. I am just pratically piecing pieces together with my "eyes closed" and somehow come out with a working VB codes.
Sub BlankGcolumn() Dim cl As Range For Each cl In Range("B8", Range("B15").End(xlUp)) If cl.Value = "" Then cl.Offset(0, 0) = cl.Offset(0, -1) & " " & cl.Offset(1, -1) End If Next cl End Sub
in the "Next cl" part, i want it to skip the next cell and do the one after it. Ive tired: ....
I have create excel VBA to put data from excel sheet to Server database through network. I create the VBA on the "Workbook_beforeprint" so every time the user print out the sheet, the code will run.
Problem occur when there is no network and excel application become not responding.
I want to make VBA code so that every time excel application become not responding because no network, this code will bypass the existing VBA and resume to print.
I have a spreadsheet with a lot of account numbers. I want my Macro to highlight the row A:C if certain accounts are found in the spreadsheet.
For Example:
Account numbers "10998-0000" and "18999-0000" are allowed to be in the spreadsheet so don't want them highlighted. But Account "10110-0000" should be highlighted.
I know the Macro will be big but I was hopping something like: If ActiveCell is not accounts .... I would then list all my account numbers... Then
and at the end a loop until ActiveCell is Empty.
I have this so far.
Range("A12").Select MyColumn = 1 i = 12 Range("A" & i).Select
I need to add something to my macro to delete a sheet if it doesn't have more than 40 rows of data. If it has more than that, it needs to do a whole bunch of stuff to it. I've already got the whole bunch of stuff written, I'm just not sure how to do the if function. I took a stab at it, but it wants the count to be an object. I am not very good at writing code.
Code:
Dim count As Integer Set count = "COUNT('33M & 33RUL'!A:A)" If waffle Is "
I have been using this macro, which works perfect:
Sub Signflip() Dim cell As Range For Each cell In Selection If IsNumeric(cell.Value) Then cell.Value = -cell.Value Next cell End Sub
It allows me to select cells and flip from neg to pos, pos to neg, and it won't error out on text cells. Great little macro.
However, I don't like how it puts a zero in blank cells. It slows down the macro when I select large areas. Is there a way to make this macro work the same way but skip over empty or blank cells and not enter a zero.
I need my users to always enable macros when they open my workbook. Is there a way I can tell excel to enable macros and skip this initial question for users?
Can a macro make a workbook everytime you copy, it will paste special formulas only and skip blank rows? And can I still let me select the range manually? I would like to use this to link workbooks.
I have a list in Excel, and it has the company in one column, and it's information in the next x rows until there is a blank row (4-7 rows). I get that you can copy the rows under the Company, transpose next to the company, and then delete the contents of the cells that you just took the data from, but I have 6200 rows do to this to, for 500+ companies. I tried recording a macro for two entries, and this is what I have (see below), but how do I modify this so that I don't need to type in every single range, and it will do it to the whole column? The data is in column A, I am posting in column B.
Basics for Macro Requirement:
1. Find the blank cell in row A 2. Skip the next cell/row (this is the company) 3. Select all the cells beneath the company cell, until it reaches the blank cell underneath 4. Copy, transpose these cells next to the Company cell (transpose in column B) 5. Delete the contents in row A that were just transposed 6. Find the next cell with data (company) 7. Repeat Steps 2-6
I have an excel program that is supposed to count word instances in a word document. I can't seem to find the right declaration for a word document. For example to declare a workbook in excel its
Dim wb As Work Book
I've tried
Dim doc As Word.Document 'or Dim doc As Word.Application
as shown in some of the forum posts, but an error user-type not defined keeps displaying.
