I am basically after a script that can be run from a persons workbook via an Excel Addin, e.g. they click an "Update" button, and the script imports the Forms and Modules from another workbook that i specify.
I do not however want the data held on the spreadsheet to change, just the Modules & Forms in the VBA project.
I am trying to create a new workbook out of an existing one by exporting three sheets. I need to bring along a couple of userforms.
View 9 Replies View RelatedSometimes I will copy a macro to a different workbook and then modify it to do what I want instead of writing it new.
If it has a reference to a different macro, I have to go through each module in the "VBA Project" to fine it and see what it does.
I was wondering is there a way to fine a sub routine in a project without scrolling through each module to fine it? (without going back to the workbook and clicking on the view macro button)
Also is there a way to alphabetize each sub routine in a module so it can be found easier
I've started to group my subs better so I can find them easier, but there are a lot of old ones.
I just learned that I can name each module.
A recent message prompted me to complete a project to show all modules and subroutines in a workbook.
As use of VBA to manipulate the VB Editor is a recurring issue I thought it a good idea to share this.
Option Base 1
Dim WBname As String
Dim ws As Worksheet
Dim TitleStr As Variant
Dim VBProject As Object
Dim ToRow As Long
Dim ToCol As Integer
Dim ComponentType
Dim MyComponent As Object
Dim ComponentName As String
Dim TypeArray As Variant
Dim StdCol As Integer
Dim LastLine As Long
Dim CurrentLineNumber As Long
Dim CurrentLineText As String
Sub SHOW_ALL_MODULES()
WBname = ActiveWorkbook.FullName
On Error Resume Next
Set ws = ActiveWorkbook.Worksheets("WB Contents")
If Err.Number 0 Then ' sheet not exist....................
i've got an excel workbook called..lets say.. "Database"..it contains spreadsheets with lots of exciting data..and Users view(and occassionally add to) this data through a variety of userforms.
what i'd love to know is whether theres any way to "bind" userforms to a specific workbook?
i.e. can i make it so my userforms "MIGHT" be displayed (might bcos it depends on the users selection)...while "Database is the active worksheet".....but not displayed if it isn't...e.g. if they open another excel workbook..
at the moment my userforms are present in every excel project (while Database is open and the forms are being used), which is clearly bad since they block half the screen....
does anyone possibly know how to have Userforms only show up when a specific workbook is being used?i've been stuck on this for a couple of days now and its driving me crazy.
equally if you don't think its possible, i'd love to know so i can stop wasting my time on this....there is a way around the problem..but it involves putting my "Main Menu" -which opens all my userforms- as part of an excel spreadsheet instead of a userform..and having it userform based just makes it look so much better.
Can someone help me to get the code to copy an existing workbook, with all the forms and code that exist with it, to a new workbook with the data from the cells, and name the file with a new name?
View 6 Replies View RelatedI'm just beginning to work with userforms and have created a couple of forms for workbook navigation. The Menu form is set to appear only on the menu worksheet and the Navbar form is set to show on several database sheets. Both forms are set th hide when the workbook is deactivated.
Private Sub Workbook_Deactivate()
Menufrm.Hide
Navbar.Hide
End Sub
The problem is that when I return to the workbook the forms do not unhide. Using the workbook_activate event causes both forms to show simultaneously. I also have the worksheet_activate event set to show the applicable form.
Private Sub Worksheet_Activate()
Application. ScreenUpdating = False
ActiveWindow.DisplayGridlines = False
Navbar.Show
Navbar.Left = Range("B3").Left
Navbar.Top = Range("B3").Top
Application.ScreenUpdating = True
End Sub
Upon returning to this workbook, I only want the appropriate form to show relative to the worksheet that is active. That is, if I was on sheet2 when I switched to another workbook, sheet2 would be active when I return to the workbook and should show the Navbar form. The menu form should show on sheet1, and the navbar form on sheets 2-5. How do I get the correct form to show when I re-activate the workbook?
I want to do is import a range from this workbook into the workbook attached. In the attached workbook on I have a Import Form where I can select the relevant workbook. I then want to be able to click import and it then goes to the source workbook and imports to the range specified. The code below is what I have got, the problem I have is that it doesnt recognize the range of data to import.
View 4 Replies View RelatedI want to create a VBA that import data from another workbook. when i run the Macro it give me the option to choose the file and when i select the file then copy data from sheet 1 (A1:D1) and paste to my active worksheet. I do not want the other file open because it is too big and takes fro ever to open it.
View 4 Replies View RelatedI have 2 separate Excel 2007 workbooks and I’m trying to import a complete spreadsheet named Client Info with all its properties from one workbook to another.
View 2 Replies View Relatedtrying to import another excel workbook with its location being flexible as the file-name will change.
This is what i got so far
Code:
Dim selectFile As String
selectFile = Application.GetOpenFilename(FileFilter:="Excel Files, *.xls*" _
, FilterIndex:=1, Title:="Open Excel file" _
, MultiSelect:=False)
[Code].....
I have problem on trying to copy value from another workbook in specific folder this my marcro that i record
Code:
Sub Macro3()
Windows("TSOM_SLA_daily_20130207.xls").Activate
Cells.Select
Selection.Copy
Windows("Autoreport.xlsx").Activate
[Code] .........
Below code that is about filter code, but above what is the code for import the value (only value don't need any format).
I want to use VBA button because it will be easier for next time if i want to update my work.
At work I have a folder full of .bas files containing useful UDF's.
At the moment I am the only person in my team that makes use of these files as importing a .bas file is beyond the rest of the team (i.e. then know it contains code so they get scared).
What I'd like to do is create a workbook where they can select one of the files (each file contains a single UDF), maybe see what it does (I put an explanation in the Comments section of the properties for each file) and then have it automatically imported into the workbook of their choice so they can make use of these functions.
I would require VB help as follows:
I will assume that I have a workbook called "Target.xls" and another workbook called "Source.xls"
1. "Target.xls" workbook has sheets called (S1),(S2),(S3) and (S4), in sheet (S1) there is a button called {Import Data}
2. "Source.xls" workbook has sheets called (S1),(S2),(S3) and (S4), those sheets are identical with the same sheets of the workbook "target.xls".
3. When you press the button {Import Data} in the "Target.xls" workbook the following actions shall happen:
1. A dialog box will open and ask you about the workbook which you want to import data from.
2. You will select a workbook from the list of the hard disk or any drive, supposing you selected "Source.xls" workbook
3. You will prompt a confirmation box to confirm the import action.
4. When you press OK then certain cells (same cells always, e.g. Range a1:c7) from the sheets called (S1),(S2),(S3) & (S4) from the workbook "Source.xls" will be copied (not linked) to the same cells in the workbook "Target.xls".
I have a rather large workbook with around 10 sheets. i want to setup a 'export' button on this workbook that will allow a user to save raw data from this workbook into another excel workbook and an ' import' button that will allow user to import raw data and use the existing formulas/links from this large workbook.
As in sample file, i want to be able to export/import all the cells that are orange in colour (in my actual file, all raw data cells are not actually orange, thought colour coding it would make my problem easier to understand)
I was thinking around these options:
1) Copy and then PasteValues from the large worksheet into another workbook for exporting and same idea for importing
2) For all raw data, copy out all the values and put their corresponding addresses in another excel sheet. e.g. column1: Sheet1!$A$1, column2: value
and import it in by reading the address n value.
I have found code by John Walkenback
I need to adapt it to allow several worksheets to be exported to a workbook .cvs .Then imported back into the original workbook including all blanks.
I have included the Walkenback workbook and a test workbook that I have been playing with.
Just about reached the brick wall with my abilities on this problem
I'm trying to import a range of cells from one workbook to another. I've got this far with it but am getting a Runtime Error '1004'.
Sub ImportData()
Application.ScreenUpdating = False
Set wb1 = ActiveWorkbook
[Code].....
I'm trying to import data in to an existing workbook. When i run the macro in the existing workbook, a new workbook opens and the data is dropped there. What do i need to change to get the data to pull back in to the existing workbook?
View 2 Replies View RelatedI'm looking for a macro that will import multiple .csv files from c: emp each into their own separate worksheet.
View 5 Replies View RelatedI would like to import all data from a workbook (only 1 sheet), which the user must select from a file dialog, into a spesific sheet in the active workbook.
View 5 Replies View RelatedI am using the following code to import data from a closed workbook;
Code:
Dim SaveDriveDir As String, MyPath As String
Dim FName As Variant
SaveDriveDir = CurDir
MyPath = Application.DefaultFilePath 'or use "C:Data"
ChDir MyPath
[Code] .....
I'd like to modify it slightly so that it only imports data according to the following criteria;
The used range from A3 onwards but only if the row in column G shows 'Never' or the figure is 30 or more. If column G passes, (so neither of the criteria apply), then column J is checked for the same criteria and if so imported.
Sub Macro1()
DoCmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel8, "COOPtbl1", "C:Documents and SettingskanegrMy DocumentsBook1.xls", True, ""
End Sub
Heres the code I keep getting a
"Run-time error '424':
Object required"
Message.
There are 7 files on the network that everyone updates. These are contact databases for clients, insurance companies, our agents, etc. Any changes that need to be made are made. The first person to open a file will get edit mode, the others will only get read-only mode. I rarely have to edit, so if I'm first then I'll invariably be asked to exit so others can update them. I've tried doing the share workbook, but it's not working. That's not what I'd like to do anyway.
I've made a workbook with 7 different sheets, each tab named after one of the network databases. I'd like for these sheets to automatically update if/when changes are made to the master - but keep my formatting intact. Right now I'm relying on import external data, but that doesn't update. Therefore, I have to delete and re-import every morning, losing all of my formatting. Surely Excel has an easier way to do this?
The databases are highly sensitive information so I can't really attach one - but I will attach a dummy example of what they all look like. Each file is hundreds of rows and maybe 15-20 columns, so the thought of linking each cell is more than I'm looking to do.
I am importing data from an outside excel file to several other files. I requested that the data be refreshed every time I open the file that references the outside excel file. Whenever I have a file open that references the outside excel file, I can only open the outside excel file in a read-only state. Why is this, and is there any way around this issue?
View 2 Replies View RelatedWhat is the best way to import data from another closed workbook? I used the macro recorder and it gives me something like this
ActiveCell.FormulaR1C1 = "='[CASHFLOW.xls]Sheet1'!R66C5"
I don't think this is the best way, since it asks me to update links when I reopen the file.
how to import an excel data file into another excel file? I have a file with a tab full of data that I need to import into another file and then I have to manipulate the data. I have figured out how to use an opendialoge box to select the file but after that i'm not sure how to get it into my file.
View 3 Replies View RelatedHow can I import specific cells from say Workbook A and B to Workbook C automatically? For example. As I type in a cell in Workbook A then Workbook C reflects it straight away. Same as when I typ in Workbook B the C updates automatically. The end result will be that Workbook C automatically updates itself to show data from specific cells in Workbooks A &B.
View 1 Replies View RelatedI've got a spreadsheet listing applications on PCs (assets), one line per application, and need to import that info into another document for each PC and save it with a file name which = the PC name (asset number). I've attached a couple of sample files to try to explain what i mean.For asset number PC037014 I need the corresponding fields filled and the list of applications pasted under where is says Additional Software List (inserting more rows if there are too many applications to fit in). Once the information has been populated, i'd like the file to be saved in a specific folder then move onto the next asset number in the list.
View 13 Replies View RelatedI have hit a wall as to create an open event to import data from another workbook. This process has to be automated.
View 9 Replies View RelatedI have a workbook I add report data to, in the form of imported sheets. I know how to do this with text files, but I'm lost on existing excel files. I want to add Sheet1 from one excel file to another workbook. I got this far, but I don't know how to tell the computer to import the data from Sheet1 in the old file into the new version of Sheet1 in the workbook. So I currently get a blank new sheet.
Sub OpenExcelFile()
Dim FileToOpen As String
Dim wks_exp_src As Worksheet
Dim i As Long
Dim strSourcePath As String
Dim strSourceName As String
Dim strSourceExt As String
Dim strNewShName As String
Dim strNameFinal As String
Dim FirstPos As Long
Dim bolShCreated As Boolean
ChDir ThisWorkbook.Path & "" ' "C:"