I have found code by John Walkenback
I need to adapt it to allow several worksheets to be exported to a workbook .cvs .Then imported back into the original workbook including all blanks.
I have included the Walkenback workbook and a test workbook that I have been playing with.
Just about reached the brick wall with my abilities on this problem
I have a rather large workbook with around 10 sheets. i want to setup a 'export' button on this workbook that will allow a user to save raw data from this workbook into another excel workbook and an ' import' button that will allow user to import raw data and use the existing formulas/links from this large workbook.
As in sample file, i want to be able to export/import all the cells that are orange in colour (in my actual file, all raw data cells are not actually orange, thought colour coding it would make my problem easier to understand)
I was thinking around these options:
1) Copy and then PasteValues from the large worksheet into another workbook for exporting and same idea for importing
2) For all raw data, copy out all the values and put their corresponding addresses in another excel sheet. e.g. column1: Sheet1!$A$1, column2: value
and import it in by reading the address n value.
I have been copying the work sheet ranges
"Consolidated Data" D4:K17
"Support Schedule" D5:W504
"Tangent Calx1" D4:F34 , J4:J34 and M4:M34
"Tangent Calx2" D4:F34 , J4:J34 and M4:M34
To a seperate worksheet for export to a txt file {for saving}
Then {when required} importing the txt file data into the worksheet ,copy the data back to the worksheet ranges and re-calculating the data. I have struggled to trying and butcher the code and delete the copy stage and write just the required ranges to the txtfile.(And reverse)
simply to say i want export and import all my "auto correct" words to other computer instead of typing manual...
Here some example am using daily ..
PLAN MISMATCH IN CPOS WITH CAFP 1
P2P NOT ELIGIBLE P 2
NEED CLARITY ON PLAN AND TOPPINGP 3
NEED CLARITY ON TOPPING P 4
NEED CLARITY ON RECEIPT AMOUNT AND RECEIPT NUMBERP 5
NEED PLAN APPROVAL P 6
if i type P1 in a cell it will show PLAN MISMATCH IN CPOS WITH CAF, i have like this many words. i want load it another one computer instead of adding manual typing. is it possible?
write code to post Excel data directly to Peachtree using VBA rather than the export/ import process?
View 5 Replies View RelatedMacro to export and import a module and assigning different macro automatically ...
View 9 Replies View RelatedI use this code to export sheets to a new workbook.
View 5 Replies View RelatedI'm trying to export a table to a csv file
Check out this screenshot:
[URL]....
So I'm just trying to export B2 through the last Row in D (B2:Dlastrow)
Perhaps it's having a problem because the data is being populated with a vlookup from a different sheet?
Here is the workbook(pardon the size, I just wanted to include it in its entirety)
Track.xlsm
Take a look at sheet ""Deactivate"
Here is the code I'm using
Code:
Sub Images1()
Dim LR As Long
Application.ScreenUpdating = False
Application.DisplayAlerts = False
With Sheets("Deactivate")
[Code]...
[URL]...
Export Table to CSV (with code & workbook)
I've found several posts that talk about this but none are quite what I'm looking for and I don't understand them well enough to modify to my needs.
I have a workbook with several sheets. I wish to
1) save the workbook as is (you'll see why)
2) export each sheet as "worksheetname.csv: to the same folder as the original workbook
3) Close the workbook without saving it becasue I've discovered that if you then save it it overwrites the last CSV file I just created with the info reformatted in a goofy, unusable way (hence the save in the first step
I have a spread sheet called "Quote" I have 3 command buttons in this worksheet.
"CommandButton1_Click()" is "Create Quote"
"CommandButton2_Click()" is "Home"
"CommandButton3_Click()" is "Create Client Quotation
I would like to be able to add another command button to export the worksheet "Quote" to a new work book and then automatically print it to a PDF naming the file from the next available quotation number in directory I:Quote register.xls. is it possible to find the next available number by finding the next blank cell in column B in the above directory I:Quote register.xls?
I would like it to copy the Create Client Quotation Macro to the new workbook if possible. The other 2 command buttons are not relevant after the export.
Export ALL modules, forms, objects etc in one workbook to another and if that can't be done than at least all modules and/or objects. This is so I can change code but leave the formulas/values etc in the main excel sheets. Basically it would need to delete all VBA code and copy, I guess from a text file to insert the new code, at least for modules and objects. Forms, I don't know how that can be done?
I would like to know if their is a way to export about 100 Named Ranges from 1 workbook to another. I work with about 20 pricing templates and have just been tasked to start tracking about 100 of the fields out of each template. I named about 100 ranges on one of the templates and want to name those same fields on the other templates with the same names so I can build a macro to just pull all of those ranges from the different templates into a metric tracking workbook. My question is if there is a way to name those same ranges on the other workbooks w/o doing it manually. If I copy and paste or copy the worksheets from one book to another I will spend just as much time deleting links from the other workbook as well as updating the contract information.
All of the Ranges are Sheets that are named exactly the same and in the same exact cells on each sheet.
I've been investigating how to use a UserForm in Excel. While I've learned some, I can't quite figure out how to export the data from the UserForm. I want the form in one workbook and have it record a new row in a different, but constant workbook each time the action button is clicked. I have been able to create the form and included the action button, but I don't know what code to assign to the button.
I think I know the important pieces to the puzzle, but I don't know the syntax or how to put them together.
Form Details:
2 Text Boxes (TextBox1 & TextBox2) - TextBox1 is the Employee Name. TextBox2 is the Employee Number
10 List Boxes (ListBox1:ListBox10) - All ListBoxes will return a value of either "Yes" or "No".
1 Action Button (RecordCommand)
Export Details:
File Path Where the new workbook will be stored: E:HR Team Audit
File Name of Workbook where form data will be stored: "HR Audit Record Workbook.xlsx"
Column Headers will be in Cells A1:L1 of that workbook
Below is the code for the Text and List Boxes:
Code:
Private Sub UserForm_Initialize()
With TextBox1
End With
With TextBox2
End With
With ListBox1
.AddItem "Yes"
.AddItem "No"
End With
[Code] ........
I am trying to create a template which when filled out will automatically transfer multiple cell information to an excel database, and everytime the template is filled out - transfer the new information to a new row (sequentially) - I do not want the info to remain on the core template - it needs to be blank after every use.
I tried the template wizard - which worked to a degree but I was unable to move the database file to an alternate location and still have it work - I was also unable to alter the code created by the wizard due to password protection.
to sum up I need a template that updates numerous cells on a database in sequential rows that can be transfered to another computer / location.
(The attached workbook will provide a more obvious explanation.)
I am building a 'reporting' workbook. It has 3 tabs.
i. the first I will use for buttons to call macros (no help needed)
ii. the second tab is 'REPORT' - where data from the third tab ('DATA') will be collected/organized -based on a textual value in column D - before being exported into a seperate workbook (finalized report).
iii. third tab is 'DATA' - this sheet will contain all the data that will provide info for reports
Presently, the 'REPORT' tab has been manually filled in with data from 'DATA' tab - I did this thinking it would provide better explanation here; take note that values in column D will be gathered via vlookup to other worksheets not included her.
Here is what I want to do:
1. goto 'DATA' tab, find the first PLATFORM (column D) text value
2. goto 'REPORT' tab, put that text value in B2
3. go back to 'DATA' and in each row that the same PLATFORM is present, copy over the corresponding info to the appropriate cell in 'REPORT' tab
4. once I've collected all the rows for one PLATFORM - export and save the 'REPORT' worksheet to a seperate workbook in 'C:REPORTS' and close
5. clear the range where data is being written in 'REPORT' tab ("A5:H60000"), then go back to 'DATA' and get the next PLATFORM (column D) text value - enter it into B2.
6. fill the range ("A5:H60000") with the corresponding values from 'DATA' based on the new PLATFORM name...
I have built a simple little logger forlogging insurance policies set up without permission, at the moment it logs all data in sheet2 of the active workbook. What I want it to do is when submit is clicked is to export and save the data to a seperate (central) workbook to collate all entries and not to save it in the active workbook. I've inlcluded the file and the code is as follows;
Private Sub CommandButton1_Click()
Dim ws As Worksheet, lRow As Long, Str As String
Set ws = Sheets("Sheet2")
lRow = ws. Range("A" & Rows.Count).End(xlUp).Offset(1).Row
'____error handling______
If TextBox1.Value = "" Or NullString Then
MsgBox "Ooops, it seems you haven't entered a policy number!", vbCritical, "Error..."....................
I want to do is import a range from this workbook into the workbook attached. In the attached workbook on I have a Import Form where I can select the relevant workbook. I then want to be able to click import and it then goes to the source workbook and imports to the range specified. The code below is what I have got, the problem I have is that it doesnt recognize the range of data to import.
View 4 Replies View RelatedI was handed a workbook that is password protected. The worksheets are not password protected. Because the workbook is protected, I cannot add or delete worksheets.
I figured that I could get around this by copying the worksheets to another workbook, but I can't even do that. Naturally, no one remembers what the password is.
I want to create a VBA that import data from another workbook. when i run the Macro it give me the option to choose the file and when i select the file then copy data from sheet 1 (A1:D1) and paste to my active worksheet. I do not want the other file open because it is too big and takes fro ever to open it.
View 4 Replies View RelatedI have 2 separate Excel 2007 workbooks and I’m trying to import a complete spreadsheet named Client Info with all its properties from one workbook to another.
View 2 Replies View Relatedtrying to import another excel workbook with its location being flexible as the file-name will change.
This is what i got so far
Code:
Dim selectFile As String
selectFile = Application.GetOpenFilename(FileFilter:="Excel Files, *.xls*" _
, FilterIndex:=1, Title:="Open Excel file" _
, MultiSelect:=False)
[Code].....
I have problem on trying to copy value from another workbook in specific folder this my marcro that i record
Code:
Sub Macro3()
Windows("TSOM_SLA_daily_20130207.xls").Activate
Cells.Select
Selection.Copy
Windows("Autoreport.xlsx").Activate
[Code] .........
Below code that is about filter code, but above what is the code for import the value (only value don't need any format).
I want to use VBA button because it will be easier for next time if i want to update my work.
At work I have a folder full of .bas files containing useful UDF's.
At the moment I am the only person in my team that makes use of these files as importing a .bas file is beyond the rest of the team (i.e. then know it contains code so they get scared).
What I'd like to do is create a workbook where they can select one of the files (each file contains a single UDF), maybe see what it does (I put an explanation in the Comments section of the properties for each file) and then have it automatically imported into the workbook of their choice so they can make use of these functions.
I would require VB help as follows:
I will assume that I have a workbook called "Target.xls" and another workbook called "Source.xls"
1. "Target.xls" workbook has sheets called (S1),(S2),(S3) and (S4), in sheet (S1) there is a button called {Import Data}
2. "Source.xls" workbook has sheets called (S1),(S2),(S3) and (S4), those sheets are identical with the same sheets of the workbook "target.xls".
3. When you press the button {Import Data} in the "Target.xls" workbook the following actions shall happen:
1. A dialog box will open and ask you about the workbook which you want to import data from.
2. You will select a workbook from the list of the hard disk or any drive, supposing you selected "Source.xls" workbook
3. You will prompt a confirmation box to confirm the import action.
4. When you press OK then certain cells (same cells always, e.g. Range a1:c7) from the sheets called (S1),(S2),(S3) & (S4) from the workbook "Source.xls" will be copied (not linked) to the same cells in the workbook "Target.xls".
I'm trying to import a range of cells from one workbook to another. I've got this far with it but am getting a Runtime Error '1004'.
Sub ImportData()
Application.ScreenUpdating = False
Set wb1 = ActiveWorkbook
[Code].....
I'm trying to import data in to an existing workbook. When i run the macro in the existing workbook, a new workbook opens and the data is dropped there. What do i need to change to get the data to pull back in to the existing workbook?
View 2 Replies View RelatedI'm looking for a macro that will import multiple .csv files from c: emp each into their own separate worksheet.
View 5 Replies View RelatedI would like to import all data from a workbook (only 1 sheet), which the user must select from a file dialog, into a spesific sheet in the active workbook.
View 5 Replies View RelatedI am using the following code to import data from a closed workbook;
Code:
Dim SaveDriveDir As String, MyPath As String
Dim FName As Variant
SaveDriveDir = CurDir
MyPath = Application.DefaultFilePath 'or use "C:Data"
ChDir MyPath
[Code] .....
I'd like to modify it slightly so that it only imports data according to the following criteria;
The used range from A3 onwards but only if the row in column G shows 'Never' or the figure is 30 or more. If column G passes, (so neither of the criteria apply), then column J is checked for the same criteria and if so imported.
Sub Macro1()
DoCmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel8, "COOPtbl1", "C:Documents and SettingskanegrMy DocumentsBook1.xls", True, ""
End Sub
Heres the code I keep getting a
"Run-time error '424':
Object required"
Message.