Insert Row Is Looping?
Oct 7, 2013
I have two lookup tables with data on worksheet 2 and will be displaying the results on worksheet1. I scan the student ID card barcode and it gives me the student info, then scan the laptop barcode and it gives me it's info with a time stamp. So sorta like inventory management.
That was easy, but the next part I just cant do on my own.
What I want to happen is make Row 2 to be used only for input, so that when data is inserted it is then shifted down one row every time I add new data.
My issue is that my code is now just stuck in an infinite loop when adding a row and crashing excel. I don't even know if I am using the correct code either. Another issue I ran into is that it is copying the cells contents and the vlookup formulas which is not needed in the rows below.
My code so far(pitiful I know):
Private Sub Worksheet_Change(ByVal Target As Range)
'when data is entered in C2 only then do I want the code to activate
'My train of thought is, enter data in A2 and C2, vLookup happens, then it is to Copy Row2 contents
'If there is content is Row3, push it down one row, then paste into Row3 what was in Row 2
'Then bring back the cursor to A2 to rinse repeat
If Range("C2").Value = 0 Then Exit Sub
If Range("C2").Value >= 0 Then
[code].....
View 2 Replies
ADVERTISEMENT
Jun 13, 2014
I would like to create a change event macro that will update multiple formulas that pull data from various tabs on a file. The tabs are named with a single date. So ideally when a certain master cell (Allocation!H2) is updated to the current date the macro will be prompted to update the range that contains formulas and update accordingly...so its and index match fomula based that has a variable being the tab name which is a date. I have a range of dates in cells F4:AB4 and want the formula to go into F5:AB5, I can then fill that down to whatever row I want...that bit I can handle.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim KeyCells As Range
Set KeyCells = Worksheets("Allocation").Range("H2")
[Code]......
View 4 Replies
View Related
Mar 23, 2012
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
View 2 Replies
View Related
May 7, 2009
I can use the MATCH function when i am in excel but i am having trouble getting it to work when i am trying to insert the formula using VBA.
Here is the code i have but it wont even compile........
View 9 Replies
View Related
Aug 8, 2014
I know how to loop for 1 to 10.
But is it possible to loop for 01 to 10?
Like:
[Code] ......
Because I am pulling data from external aplication, so the 0 is fix in a row/column.. I will need to get the row/column for the whole "01" and not only "1".
View 2 Replies
View Related
Aug 18, 2009
I am not sure what I am doing wrong with this expression. I know the code is a little messy, sorry.
View 2 Replies
View Related
Aug 8, 2009
Is it possible to write a cell formula (not a macro) to loop through a range of cells and test for a value? Something tells me that I need to use the "Offset" function.
View 9 Replies
View Related
Feb 14, 2010
How do I continue to loop through the last row and get the values to 3 differrent text boxes?
If I remember right, I think the command is Offset, 1 to go to the right one cell correct?
Sub CommandButton1_Click()
'("PowerAnalysis").cells(Row, 3).Value = textbox1.Value
'Worksheets("PowerData").Cells(Row, 3).Value = TextBox1.Value
Set WkSht = Worksheets("PowerData")
LastRow = WkSht.Range("A" & Rows.Count).End(xlUp).Row
WkSht.Cells(Row, 1).Value = TextBox1.Value
'LastRow = r
'r = ActiveCell
'Dim r As Long
'r = ActiveCell.Row
'UserForm3.Show
'WkSht.Cells(Row, 3).Value = TextBox1.Value
UserForm3.TextBox1.Value = r
End Sub
This code is wrong, but how can I get the first three records on the last row to display in three textboxes on UserForm3 titled TextBox1, TextBox2 and TextBox3.
Norie may be right, I may not have to even think about using repaint.
View 9 Replies
View Related
May 21, 2006
I have created a spreadsheet used for timber design. The spreadsheet calculates whether a specified size of timber column will support a specified load under certain conditions.
The various conditions include, load duration, service class, strength class and limit states.
Ok at the moment the user specifies the load and length of the column, then chooses a size of timber and sets the conditions mentioned above. Once this has been done the calculations i have put together on another sheet, work out whether the size of timber can support the specified load.
It is important to know that the answer for the final strength formula of determining the strength of the column should be equal to or less than 1. If this is the case then the column is ok, if the answer is larger than 1 then the column isnt safe.
Also at various points within the calculation certain checks are required to make sure certain design values satisfy certain criteria. If they dont then a new size of timber sould be tried.
What i would like to be able to do is use a loop so that the spreadsheet will use differing sizes of timber and calculate the values that satisfy the criteria and eventually find the size of timber required. The final answer of the strength calculation should be as close to 1 as possible but not over.
View 8 Replies
View Related
Nov 5, 2006
My code is supposed to generate figures to plot the changes in a riverbed profile with time. At time zero, there is a main subroutine that goes through a number of Subroutines and iterations before ending. At time t, I have another main subroutine which is slightly different but would go through most of the subroutines of tine zero. I want the code to go through for time t=0, display the values and then go through the other loops as well, displaying the values for each loop. I thought I knew what I was doing, but the displayed results showed reasonable results for the first (time zero), but the others were just replicas of the same thing. Is there anyway I could use variables with vectors i.e patty(j,i), where i could run the loop for i, and then do Next j.
View 4 Replies
View Related
Feb 8, 2013
I have the below code which converts a range to PDF and saves it on our network drive. I would like to change my code to a loop so I don't have to do so much typing. There are 68 rows between each range.
VB:
Sheets("CPS CSR Dashboards").Range("A2:K69").ExportAsFixedFormat xlTypePDF, "G:Call Center ReportingWeeklyAgent DashboardsTemp" & [ 'CPS CSR Dashboards'!M3] & ".pdf"
Sheets("CPS CSR Dashboards").Range("A70:K137").ExportAsFixedFormat xlTypePDF, "G:Call Center ReportingWeeklyAgent DashboardsTemp" & [ 'CPS CSR Dashboards'!M71] & ".pdf"
A2:K69 is the range for Agent 1 which will be saved as as a PDF M3 is the cell which contains Agent 1's name for which the file is to be named.
A70:K137 is the range for Agent 2 which will be saved as another PDF M71 is the cell which contains Agent 2's name.
View 1 Replies
View Related
Jul 6, 2013
I am trying to code something that will loop through a given set of columns. I know that if I say "For each C in R", that would mean, looping through each cell inside the Range "R", but what I want is something like this:
VB:
Dim rzRng As range, rzSmallRng As range
Set rzRng = Union(range("A:A"), range("C:C"), range("F:F"), range("AB:AB"), range("AS:AS"))
For Each rzSmallRng In rzRng
statement here...
Next
(I have a total of 30 columns that I need to put inside that Union function) . And then loop through the range as a whole set (not though each cell of that range).
I also tried the following code:
VB:
With Union(range("A:A"), range("C:C"), range("F:F"), range("AB:AB"), range("AS:AS"))
statement here....
End With
But it ended up executing the code in Range"A:A" only.
View 8 Replies
View Related
Mar 19, 2014
I have to manually drag my formula for 121 cells and then change the formula by next column and/or row number.
Currently the 2 formulas I have are:
=IF(AND($Z$4>="", $AA$4>=""),H$6,J2456)
=OFFSET(X$5,0,(ROWS($1:1)-1)*2)
After every 121 cells that I drag these formulas to, in the first formula I change from H$7 to H$7 then H$7 then H$7 and so on
In the second formula, I change from X$5 to X$6 then X$7 then X$8 and so on.And also change the ROWS from 1:121 back to 1:1
Is there a formula which I can drag and it automatically changes the column and cell reference in the 2 formulas?
View 6 Replies
View Related
Apr 11, 2014
I am looking to create a loop in a ListObject object that does calculations depending on the value of the current certain row in a column. This is the code I have so far:
[Code]....
I am having trouble with the loop; as you can see, the nested for loop will go through all the 'weight' in the column before going to the next 'grade'. I just want the loop to reference the same 'weight' that the 'grade' is on and move on. But I am not sure how to reference each 'weight' as I progress through each 'grade' in parallel.
I am aware that I can do this with regular cell references:
[Code] ......
but I am more interested in learning on how to work with the ListObject class.
View 2 Replies
View Related
Apr 28, 2007
I am using the following code in a project and would like some help to loop it until either TRUE or #N/A is found in the active cell.
View 9 Replies
View Related
Dec 2, 2008
so i've got a spreadsheet that i'm working on that i'm doing some automation for and i'm not sure where to go from here. i don't know too much about coding, but pick up a little here and there.
so what i have is 2 spreadsheets that i'm using to compare data and copy and paste the information found. there is a list of data in column E that i am copying and pasting into the "timestamp log" which has a macros that search for a variable in that workbook, if the variable is found the cell is copied. then "advisor info1" is activated and pasted in column H.
now i'm trying to avoid having to write the below coding for each and every cell in column E that has data to be found. is there a way to loop the process until a blank cell is found? like to have it search cell e2, e3, e4, e5... etc until it hits a cell with nothing in it? sometimes i have over 1000 cells in column E that i need to search through and trying to copy and paste out the below information 1000 times is very tedius and a waste. anyone have any ideas?
i'm not sure if i explained it clearly enough, let me know if you need a little more clarification .......
View 9 Replies
View Related
Mar 8, 2009
I have a formula in cell A1 and text in either cell B2 or C2. This text continues down the rows until there is no text in either columns B or C. I wish to copy the formula in A1 into A2 and then continue copying down column A until both cells in column B and C are empty. What is the excel VBA code?
View 2 Replies
View Related
Mar 17, 2009
I'm trying to set up a simple macro to loop through some number of dates on a sheet and blank out fields next to every instance of Saturday and Sunday. The only problem I'm having is actually finding the values "Saturday" and "Sunday"
Given a date in this format: 01/01/2009
I can convert to "Thursday"
Problem is, the vba code still "sees" 01/01/2009
I've tried copy / paste special / paste values to no avail.
I've tried changing it via VBA (a few different methods, including strings, formats, etc) with no luck. Even tried referencing my date cells from another spreadsheet and pasting the values back in. Can't seem to get 01/01/2009 to be "Thursday"
View 4 Replies
View Related
Sep 24, 2009
I have a macro that seems to get bogged down during a replace function because sometimes there is no need to replace. I figure I need to loop this and cannot figure out how to do it.
I have the code below and need to know how to loop this ....
View 10 Replies
View Related
Nov 2, 2009
Aloop I am trying to put into a macro. I have a variable range of data in Column C, header is in C1. I need to split the data in each row of the array using this code.
View 2 Replies
View Related
Jan 27, 2010
I'm wanting to loop through the first 13 Frames of a Userform and think the below code will do what I want, but I have been unable to figure out how to set cFrame.
View 5 Replies
View Related
Nov 18, 2011
I have a worksheet that has multiple (form type) checkboxes on it, and I want to write code to loop through a specific range of them (Checkbox 26 to Checkbox 36 for instance), check if the value is true and then return the .Caption value to a message box, or ultimately a cell on another worksheet.
I can do it for all of the checkboxes on the ActiveSheet, but just can't figure out how to run through.
View 3 Replies
View Related
Oct 19, 2012
I wrote a macro to loop through all of the worksheets in a work book and print all of the sheets except the first one labeled as "BidCandidates" and the last sheet labeled as "Blank".
It works just fine. However, I want it to work even when there is no first sheet labeled as "BidCandidates" and last sheet labeled as "Blank". There will be an unknown number of sheets to print and they will all have a label starting with a number from "02" through "50". For Example "02 - Selective Demolition".
Here is the code I have written;
Sub Print_All_Analysis_Sheets()
'
' Print_All_Analysis_Sheets Macro
'
'
Application.ScreenUpdating = False
Sheets("BidCandidates").Select
ActiveSheet.Next.Select
[Code]...
View 6 Replies
View Related
Apr 18, 2013
I don't understand why this code doesn't work:
Sub All()
Dim chk As CheckBox
For Each chk In ActiveSheet.CheckBoxes
CheckBox.Value = Checked
Next
End Sub
All I want to do is loop through all the check boxes on a sheet and check them. But the code acts as if there are no check boxes on the active sheet, I don't get any error messages it just never lands on the
"CheckBox.Value = Checked" line.
View 3 Replies
View Related
Nov 24, 2007
is it possible to loop in a formula like I do beneath?
The code will not run. What is wrong?
the problem is variable aa - that should be a1,a2,a3 etc.. It is no problem if I write a1 etc. in the formula. but if the loop is long I cannot write cell reference for every cell a1,a2 etc.
For k = 1 To 10
aa = Cells(k, 1)
Cells(k, 3).Value = "=KOMPLEKS(B13, 1 / (2 * pi() * aa * B14))"
Next k
View 9 Replies
View Related
Feb 9, 2008
Aside from using arrags, is there a simple way of setting up a loop statement involving words?
View 9 Replies
View Related
Feb 29, 2008
I've got a inventory sheet that I would like to simplify by using a looping macro.. I'm trying to make it so that the user will enter in 5 different part of information about each product. I've got the text boxes made but i dont know how to loop them together. It goes like this..
starting on the first available empty row down
a txtbox for column (A) game#(B)Lot#(C)TicketValue(D)#of ticket(E)$value.
Then after they finish the 5th box
"any more" yes or no
on a differnt page with a loop but it was only for 1 column going down..this is 5 across then 75 down..
I'll include a snippet of the sheet.
View 9 Replies
View Related
Apr 29, 2008
I'd heard that using FIND might make macros run faster than looping. Below is the code I'm currently using. There are two worksheets. The first has a column containing numbers and a blank column to insert the associated code. Sheet two has a list of unique numbers with the associated code. Presently I used a nested loop to populate the code column of the first sheet. As sheet 1 contains in the neighborhood of 25,000 rows it can take quite a long time to run using the loop
Option Explicit
Sub BWRawCoding()
Dim wb As Workbook
Dim wsPT As Worksheet, wsAgg As Worksheet
Dim RowsPT As Integer, RowsAgg As Integer
Dim LoopPT As Integer, LoopAgg As Integer
Set wb = ActiveWorkbook
Set wsPT = wb.Worksheets("Graphical Data -RAW")
Set wsAgg = wb.Worksheets("agg")
RowsPT = wsPT.UsedRange.Rows.Count
RowsAgg = wsAgg.UsedRange.Rows.Count
For LoopPT = 2 To RowsPT
For LoopAgg = 2 To RowsAgg
If wsPT.Cells(LoopPT, 6).Value = wsAgg.Cells(LoopAgg, 2).Value Then
wsPT.Cells(LoopPT, 24).Value = wsAgg.Cells(LoopAgg, 1).Value
End If
Next LoopAgg
Next LoopPT
End Sub
View 9 Replies
View Related
Jun 17, 2008
I have a macro (written with the help of forumites here) which, when selecting a cell on a particular sheet, will select and copy data from various rows on various sheets, print a resulting chart, before returning to the original sheet.
Now, I use autofilter on the original sheet to help organise the data I wish to copy and print.
My question: is it possible to adapt my macro so that, once it has run through once, will move to the next cell in the autofiltered column and run the macro again, and again, and again... to the bottom of the autofiltered column?
At the moment, I'm running the macro, pressing the 'down' key and then running the macro again until I've exhausted the column. There must be an easier/better way.
View 9 Replies
View Related
Jul 6, 2008
I'm working out of the book, and I'm close to what I need but at a beginner's block. I want to delete all rows of a table of stock information where the symbol (column b) contains a "."
Here's what I've got:
Sub Earnings_SymbsClnUp()
'Deletes the newly posted trades that have a "." in the symbol.
Dim finalrow As Integer
Dim i As Integer
finalrow = Cells(Rows.Count, 1).End(xlUp).row - 8
MsgBox finalrow
For i = finalrow To 9 Step -1
If Cells(i, 2).Value = "ITRA" Then
Cells(1, 2).EntireRow.delete
End If
Next i
End Sub
View 9 Replies
View Related
