Looping Through Frames
Jan 27, 2010I'm wanting to loop through the first 13 Frames of a Userform and think the below code will do what I want, but I have been unable to figure out how to set cFrame.
View 5 Replies
ADVERTISEMENT
Disabling Frames By Content
Jan 25, 2010I have a UserForm with lots of controls divided by multiple frames. (163 controls over 19 frames). The same UserForm will be collecting multiple sets of data but the first set is a "master" set. Anything entered in the master set will auto fill in subsequent sets.
What I need is a way of preventing the user from changing any options that were input in the master set in subsequent sets. ie, If I entered info into Frame1 of the master set it would show up the next time I opened the UserForm (I have this part), but I would not be able to interact with it (this is what I need).
Since I'm already pre-populating subsequent sets with the master info, my first thought is to loop through each frame testing for input and if so setting Enabled = False, but I'm not sure how to do the loop/test. Is there a way to set up a "For Each Frame in UserForm" statement? Also, the controls in each Frame could be TextBox, OptionButton, and/or CheckBox. (sometimes more than one type in the same Frame)
Trying To Designate Time Frames
Mar 10, 2005I'm trying to designate if a worker has worked over night and specifically between the hours 22:00 and 06:00.
In Greece these hours are been managed as extra benefit, so when I enter the worker's In (C5) and Out (D5) hours I wan't it to bring me in a cell the total hours he has worked in that specific time zone.
Break Down Time Frames
May 8, 2008I have a spreadsheet with agents schedules. What I would like to do is to break down the schedules to determine how many hours are worked between different times. This is what I have: C7:C11 is Sunday Start Times D7:D11 is Sunday's End times. The sheet does Sun-Sat. so Saturday ends at Q11. I want to find out how many agents work from 6am-10am, 10am-12pm, 12pm-2pm, 2pm-4pm, 4pm-6pm, 6pm-8pm, etc. I was originally trying to use a sumproduct but had some problems getting it to work. This is what I was trying: sumproduct(--(C33:C40>=(0,0,0)),--(C33:C40
View 9 Replies View RelatedSimulate Click Through Frames
Jun 17, 2008I think this is going to be the right method for me. I need to simulate a click on a link (because the link calls a javascript), though the link is buried behind frames.
Here's the code I am sure works for a normal 1 frame page.
appIE.Document.all(0).contentWindow.Document.all("Some Link").Click
Here is the frame setup I have to work with. Mind you the frames I need to target are not labeled so I'd have to use the numbers.
HTML <FRAMESET>
<FRAME>
<FRAMESET>
<FRAME>
<FRAMESET>
<FRAME> This is where my link is hiding
</FRAMESET>
</FRAMESET>
<NOFRAMES>
</.NOFRAMES>
</FRAMESET>
How Do I Change Time Frames In Cells
Oct 12, 2009I have a column that has time ranges in it. Example: Column N Row 6 thru
253 has the following time ranges: 11am-1pm, 1pm-3pm, 12pm-5pm, 8am-12pm
I need cells with 11am-1pm to read 13:00
I need cells with 1pm-3pm to read 15:00
I need cells with 12pm-5pm to read 17:00
Is there a formula that I can use the look up the entire column and make all the changes at once, or do I have to use the find a replace. The correct format can appear in a different column.
** I found a reply for someone one a different website with the similar problem. Below is the response but it did not work for me.
Try this formula =--SUBSTITUTE(SUBSTITUTE(MID(A6,FIND("-",A6)+1,11),"pm"," pm"),"am"," am")
Also change format to show 13:30 timeframe
Option Buttons To Show Different Frames
Oct 6, 2008I have been looking on here for a solution, but did not find the right answer, so I hope someone can help me with this.
What I like to do is on a userform set up a "frameoptions" with two option buttons and depanding on what option I click either frame A shows or frame B shows.
When I click on "option" one it shows "frame 1" and if I click on "option two" it should show "frame two". both frames I would like to have on the exact same location of the userform. So the look of the userform stays the same.
Is there a solution to this?
Accessing Web Pages Organised With Frames
Mar 25, 2007How is the data organised in frames in a web page accessed?
View 2 Replies View RelatedCalcualte Averages For Time-frames
May 19, 2007I need to calcualte averages for time-frames, of 7 days 30 days and 90 days. Attached is a spreadsheet and the data I am looking to average. I need to lookup todays date minus 1 and then average from there.
View 6 Replies View RelatedUser Form Frames Hindering Textbox Text
Oct 21, 2009I have a question regarding frames and textboxes on a user form.
I have a user form that has a number of textboxes populated from the results two Comboboxes.
I decided to group some of the textboxes in frames for more logical viewing.
I grouped the textboxes, moved them, placed two frame controls on the form then, finished by replacing the grouped textboxes. No code was altered or added.
When I ran the form, only the Comboboxes were functional and the text boxes were blank.
There were no runtime errors or compile problems.
Excel 2010 :: Count Max Time Frames Overlapping On Continuous Days
Aug 1, 2013I'm having trouble defining the time overlaps on continuous days for the varying results of the runs for my simulation.
For the following data set, without counting overlaps there are 18 total spare requirements, but if I take into account their overlaps in their duration there should be a total of 11 per day. For example in row 4 this event overlapped in the same day with the event of row 5 so both had only 2 overlaps as a result (So there is not possible to be 1 as an answer for overlap, there is only from 2 to "n" amount or 0).
But if an event overlaps with more than one in their duration the result would be their maximum overlap during this time frame.
So then I have for each event an Starting date, starting time, duration, ending date and ending duration.And for each day I would need the total amount of overlaps occurred for the duration of each event and from those I would take their maximum amount of overlaps occurred per day. To obtain their real requirement as shown on the file.
The manual procedure I'm using looks like this for the first day: (Graphical representation)
Event 1 occurs from 17:02 to 20:29 and only overlaps with Event 3, so it's 2
Event 2 occurs from 20:38 to 23:38, also only overlaps with Event 3, then its also a 2
For Event 3 in its whole duration only overlapped with Even 1 and Event 2, one at a time so its maximum overlaps where only 2.
And that's what I'm using so far to determine these amounts but since is a simulation, I would end up with several data from each run and this method would be too long. That's why I would need this template to paste data for each run (15 days) and obtain my results faster.
Excel 2010 :: Control ENTER And EXIT Event Firing With Frames Active?
Oct 22, 2011I'm having some trouble getting control ENTER & EXIT events to fire properly when having controls embedded on frames within a userform. I'm using Excel 2003, 2007, & 2010. Here's the userforms I'm working with:
With FRAME:
Without FRAME:
In both cases, the DESCRIPTION field is disabled. The selectable controls on both are a combo-box, textbox, listbox, & 2 buttons. On the FRAMED version, the combo-box & textbox are contained on a FRAME.
Here's the code, same on both userforms:
Code:
Option Explicit
Private Sub cmbRecipes_Enter()
ListBox1.AddItem "ENTER - " & cmbRecipes.Value
End Sub
Private Sub cmbRecipes_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ListBox1.AddItem "EXIT - " & cmbRecipes.Value
End Sub
All this is doing is posting a message to the listbox when the combo-box ENTER & EXIT events fire. This works as expected without the FRAME, ENTER is shown when the combo-box is entered and EXIT is shown as focus is moved to another control. But when running it on the FRAMED version all I get is a single ENTER event recorded regardless of how I move the focus through the control set.
Another oddity is that if I have more than 1 control that can receive focus on the FRAMED version, it appears to work correctly.
Work Out A Formula For My Spreadsheet Which I Use To Work Out Cutting Lists For Timber Frames
Jan 11, 2009i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies View RelatedExcel 2013 :: Separate Time From Date To Sort Time Frames Over Multiple Days?
Jun 17, 2014I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
Looping For 01 To 10
Aug 8, 2014I know how to loop for 1 to 10.
But is it possible to loop for 01 to 10?
Like:
[Code] ......
Because I am pulling data from external aplication, so the 0 is fix in a row/column.. I will need to get the row/column for the whole "01" and not only "1".
For Next Looping
Aug 18, 2009I am not sure what I am doing wrong with this expression. I know the code is a little messy, sorry.
View 2 Replies View RelatedLooping Without Using VBA
Aug 8, 2009Is it possible to write a cell formula (not a macro) to loop through a range of cells and test for a value? Something tells me that I need to use the "Offset" function.
Looping Through The Last Row
Feb 14, 2010How do I continue to loop through the last row and get the values to 3 differrent text boxes?
If I remember right, I think the command is Offset, 1 to go to the right one cell correct?
Sub CommandButton1_Click()
'("PowerAnalysis").cells(Row, 3).Value = textbox1.Value
'Worksheets("PowerData").Cells(Row, 3).Value = TextBox1.Value
Set WkSht = Worksheets("PowerData")
LastRow = WkSht.Range("A" & Rows.Count).End(xlUp).Row
WkSht.Cells(Row, 1).Value = TextBox1.Value
'LastRow = r
'r = ActiveCell
'Dim r As Long
'r = ActiveCell.Row
'UserForm3.Show
'WkSht.Cells(Row, 3).Value = TextBox1.Value
UserForm3.TextBox1.Value = r
End Sub
This code is wrong, but how can I get the first three records on the last row to display in three textboxes on UserForm3 titled TextBox1, TextBox2 and TextBox3.
Norie may be right, I may not have to even think about using repaint.
VBA Looping
May 21, 2006I have created a spreadsheet used for timber design. The spreadsheet calculates whether a specified size of timber column will support a specified load under certain conditions.
The various conditions include, load duration, service class, strength class and limit states.
Ok at the moment the user specifies the load and length of the column, then chooses a size of timber and sets the conditions mentioned above. Once this has been done the calculations i have put together on another sheet, work out whether the size of timber can support the specified load.
It is important to know that the answer for the final strength formula of determining the strength of the column should be equal to or less than 1. If this is the case then the column is ok, if the answer is larger than 1 then the column isnt safe.
Also at various points within the calculation certain checks are required to make sure certain design values satisfy certain criteria. If they dont then a new size of timber sould be tried.
What i would like to be able to do is use a loop so that the spreadsheet will use differing sizes of timber and calculate the values that satisfy the criteria and eventually find the size of timber required. The final answer of the strength calculation should be as close to 1 as possible but not over.
Looping In Vba
Nov 5, 2006My code is supposed to generate figures to plot the changes in a riverbed profile with time. At time zero, there is a main subroutine that goes through a number of Subroutines and iterations before ending. At time t, I have another main subroutine which is slightly different but would go through most of the subroutines of tine zero. I want the code to go through for time t=0, display the values and then go through the other loops as well, displaying the values for each loop. I thought I knew what I was doing, but the displayed results showed reasonable results for the first (time zero), but the others were just replicas of the same thing. Is there anyway I could use variables with vectors i.e patty(j,i), where i could run the loop for i, and then do Next j.
View 4 Replies View RelatedVBA For Looping Through Rows?
Feb 8, 2013I have the below code which converts a range to PDF and saves it on our network drive. I would like to change my code to a loop so I don't have to do so much typing. There are 68 rows between each range.
VB:
Sheets("CPS CSR Dashboards").Range("A2:K69").ExportAsFixedFormat xlTypePDF, "G:Call Center ReportingWeeklyAgent DashboardsTemp" & [ 'CPS CSR Dashboards'!M3] & ".pdf"
Sheets("CPS CSR Dashboards").Range("A70:K137").ExportAsFixedFormat xlTypePDF, "G:Call Center ReportingWeeklyAgent DashboardsTemp" & [ 'CPS CSR Dashboards'!M71] & ".pdf"
A2:K69 is the range for Agent 1 which will be saved as as a PDF M3 is the cell which contains Agent 1's name for which the file is to be named.
A70:K137 is the range for Agent 2 which will be saved as another PDF M71 is the cell which contains Agent 2's name.
VBA - Looping Through Different Columns
Jul 6, 2013I am trying to code something that will loop through a given set of columns. I know that if I say "For each C in R", that would mean, looping through each cell inside the Range "R", but what I want is something like this:
VB:
Dim rzRng As range, rzSmallRng As range
Set rzRng = Union(range("A:A"), range("C:C"), range("F:F"), range("AB:AB"), range("AS:AS"))
For Each rzSmallRng In rzRng
statement here...
Next
(I have a total of 30 columns that I need to put inside that Union function) . And then loop through the range as a whole set (not though each cell of that range).
I also tried the following code:
VB:
With Union(range("A:A"), range("C:C"), range("F:F"), range("AB:AB"), range("AS:AS"))
statement here....
End With
But it ended up executing the code in Range"A:A" only.
Looping After Every 121 Cells
Mar 19, 2014I have to manually drag my formula for 121 cells and then change the formula by next column and/or row number.
Currently the 2 formulas I have are:
=IF(AND($Z$4>="", $AA$4>=""),H$6,J2456)
=OFFSET(X$5,0,(ROWS($1:1)-1)*2)
After every 121 cells that I drag these formulas to, in the first formula I change from H$7 to H$7 then H$7 then H$7 and so on
In the second formula, I change from X$5 to X$6 then X$7 then X$8 and so on.And also change the ROWS from 1:121 back to 1:1
Is there a formula which I can drag and it automatically changes the column and cell reference in the 2 formulas?
Looping Through ListObject?
Apr 11, 2014I am looking to create a loop in a ListObject object that does calculations depending on the value of the current certain row in a column. This is the code I have so far:
[Code]....
I am having trouble with the loop; as you can see, the nested for loop will go through all the 'weight' in the column before going to the next 'grade'. I just want the loop to reference the same 'weight' that the 'grade' is on and move on. But I am not sure how to reference each 'weight' as I progress through each 'grade' in parallel.
I am aware that I can do this with regular cell references:
[Code] ......
but I am more interested in learning on how to work with the ListObject class.
Looping Code
Apr 28, 2007I am using the following code in a project and would like some help to loop it until either TRUE or #N/A is found in the active cell.
View 9 Replies View RelatedLooping/end On Blank
Dec 2, 2008so i've got a spreadsheet that i'm working on that i'm doing some automation for and i'm not sure where to go from here. i don't know too much about coding, but pick up a little here and there.
so what i have is 2 spreadsheets that i'm using to compare data and copy and paste the information found. there is a list of data in column E that i am copying and pasting into the "timestamp log" which has a macros that search for a variable in that workbook, if the variable is found the cell is copied. then "advisor info1" is activated and pasted in column H.
now i'm trying to avoid having to write the below coding for each and every cell in column E that has data to be found. is there a way to loop the process until a blank cell is found? like to have it search cell e2, e3, e4, e5... etc until it hits a cell with nothing in it? sometimes i have over 1000 cells in column E that i need to search through and trying to copy and paste out the below information 1000 times is very tedius and a waste. anyone have any ideas?
i'm not sure if i explained it clearly enough, let me know if you need a little more clarification .......
Looping With Two Conditions
Mar 8, 2009I have a formula in cell A1 and text in either cell B2 or C2. This text continues down the rows until there is no text in either columns B or C. I wish to copy the formula in A1 into A2 and then continue copying down column A until both cells in column B and C are empty. What is the excel VBA code?
View 2 Replies View RelatedLooping Through Day Of Week
Mar 17, 2009I'm trying to set up a simple macro to loop through some number of dates on a sheet and blank out fields next to every instance of Saturday and Sunday. The only problem I'm having is actually finding the values "Saturday" and "Sunday"
Given a date in this format: 01/01/2009
I can convert to "Thursday"
Problem is, the vba code still "sees" 01/01/2009
I've tried copy / paste special / paste values to no avail.
I've tried changing it via VBA (a few different methods, including strings, formats, etc) with no luck. Even tried referencing my date cells from another spreadsheet and pasting the values back in. Can't seem to get 01/01/2009 to be "Thursday"
Looping Through A Column ..
Sep 24, 2009I have a macro that seems to get bogged down during a replace function because sometimes there is no need to replace. I figure I need to loop this and cannot figure out how to do it.
I have the code below and need to know how to loop this ....
Looping Put Into A Macro
Nov 2, 2009Aloop I am trying to put into a macro. I have a variable range of data in Column C, header is in C1. I need to split the data in each row of the array using this code.
View 2 Replies View Related