Insert And Show Formula With Named Range?
Jun 3, 2014Trying to get this short piece of code to work. I'm trying to show the formula in the cell not just return the result.
[Code] ......
Why this isn't working ?
ADVERTISEMENT
Insert Total Formula Using SUMIF And Named Range
Jul 21, 2006I am trying to put a SUMIF formula at the bottom of the data. Doing it manually is fine, but I want some vba to automate it, and my vba doesnt work.
Sub balance()
'adds journal line so journal balances in each month
Dim Rga As Range
Dim Rgb As Range
Dim Rgc As Range
Dim Rgd As Range
Dim Rge As Range
Dim Rgf As Range
This code just inserts text into the formula, rather than the range of cells.
Insert Range-named Row At User-selected Row
May 3, 2008On the first row of a spreadsheet template is a <hidden> contiguous series of conditionally formatted cells (range name "stdRow" =production!$1:$1), with formulas, that I want a user to be able to easily insert at whatever row they might be in a worksheet.
If, for example, the user is at D24, then clicks the [InsertRow] button that I have positioned at the top of the worksheet (in a fixed pane), I want the attached macro to insert an instance of "stdRow" directly underneath the user position (at row 25, in this case). The use's position should still be at D24 when the macro finishes. If the user clicks the button multiple times, multiple rows should be inserted (again, without changing the user's position).
This is what I have tried so far:
Non-Continuous Range In Event Code: Show A UserForm When A Cell In 1 Of 31 Named Ranges Is Selected
Nov 7, 2006I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Dim i As Long
For i = 1 To 31
If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then
If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................
Get The Range Address Of A Dynamically Named Range That Refers To A Formula In VBA
Aug 10, 2008I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
Stop Graph From Changing Named Range To Formula Range
Sep 8, 2006I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
Use Named Range In Formula
Aug 23, 2007I have several workshts in a file with a summary worksht. I have named ranges of data on each by salesperson. How can I use a formula to get the named range from each tab to show up on the summary sheet. I tried (=Smith!AugustSales), which is the - sheet name Smith and the named range AugustSales, but I get an error.
View 9 Replies View RelatedNamed Range Formula
Dec 30, 2007Lets say that B2:B100 contains a list of numbers, and it is named RANGE1
Is it possible to make by using any formula -another named range (RANGE2) based on the first but contains every 2nd or third cell of the original range.
The solution must avoid creating another column - it has to be one formula that can be used as new named range in any application (chart series...etc.)
Use Named Range From Another Workbook In Formula
Aug 19, 2006I have two spreadsheets. The sourse spreadsheet already has many named ranges which i would like to use for the main spreadsheet to pick up its information. Is there an easy way when using vlookup or the like to name the range in the other spreadsheet?
View 5 Replies View RelatedNamed Range Name In Cell For Use In Formula
Aug 31, 2007I want to be able to do is to have a text value in a cell which will be the same as a named range and can be called from a formula in another cell. For example, I have three named ranges: JAN, FEB and MAR. Instead of having a formula which might read: =VLOOKUP("bill", JAN, 1, 1)
I would like to have in cell A1 the text value "JAN" so that the formula can read:
=VLOOKUP("bill", A1, 1, 1)
Then I can change which named range is used in the formula but changing the value in cell A1. When I try to do this, the formula just looks up the value as if cell A1 was the range rather than taking the value from A1 as the named range.
Refer To A Named Range In A CSE Array Formula?
Jan 11, 2010I know I've asked before but I can neither find my previous question or the answer.
So, once again.... is it possible to refer to a named range in a CSE array formula?
I know how I would type a formula that way -- but I would be happy to see an example.
Most importantly, will it always work? Or are there pitfalls and dangers?
OFFSET Non-Contiguous Named Range In Formula
Jul 14, 2012I have as the two logical operators for an IF function the following COUNTA calculation which checks how many blanks are in the range GrdMtx7 and subtracts this from the value in E5 and adds the suffix "Module(s)".
Code:
(E5-COUNTA(GrdMtx7)-1)&" Module(s)",(E5-COUNTA(GrdMtx7)&" Module(s)")))
GrdMtx7 is a non-contiguous range consisting of the following cell references on a second sheet:
Code:
='Mod Schedule'!$E$7,'Mod Schedule'!$H$7,'Mod Schedule'!$K$7,'Mod Schedule'!$N$7,'Mod Schedule'!$Q$7,'Mod Schedule'!$T$7,'Mod Schedule'!$W$7,'Mod Schedule'!$Z$7,'Mod Schedule'!$AC$7,'Mod Schedule'!$AC$7,'Mod Schedule'!$AF$7,'Mod Schedule'!$AI$7,'Mod Schedule'!$AL$7,'Mod Schedule'!$AO$7,'Mod Schedule'!$AR$7,'Mod Schedule'!$AU$7,'Mod Schedule'!$AX$7
I need for the formula of the IF function to copy down so that it refers to F5, G5, H5, I5...etc.
I also need for the non-contiguous named range GrdMtx7 to refer to the same non-contiguous range shifted down one row intact for the COUNTA function to operate on the next row down, such that COUNTA is checking for blanks in the range:
Code:
='Mod Schedule'!$E$8,'Mod Schedule'!$H$8,'Mod Schedule'!$K$8,'Mod Schedule'!$N$8,'Mod Schedule'!$Q$8,'Mod Schedule'!$T$8,'Mod Schedule'!$W$8,'Mod Schedule'!$Z$8,'Mod Schedule'!$AC$8,'Mod Schedule'!$AC$8,'Mod Schedule'!$AF$8,'Mod Schedule'!$AI$8,'Mod Schedule'!$AL$8,'Mod Schedule'!$AO$8,'Mod Schedule'!$AR$8,'Mod Schedule'!$AU$8,'Mod Schedule'!$AX$8
I can't get got to work at all using OFFSET and would rather not create dozens or hundreds of named ranges incrementing one at a time - is there a way to achieve this, preferably with a formula, but vba if absolutely necessary.
My best effort doesn't work:
Code:
(E6-COUNTA(OFFSET(GrdMtx7,1,))-1)&" Module(s)",(E6-COUNTA(OFFSET(GrdMtx7,1,)))&" Module(s)")
Use Named Range Name From Cell In Function/Formula
Apr 2, 2009I have several named ranges with 4 column each. The named ranges have all the same names but with the tow last digits ranging from 00 to 50 by increments of 5 (ie 00, 05, 10, 15 etc.). The 4 columns for each of the named ranges have the following headings; 10, 100, 50 ,70. I have two cells with drop down lists with the list of the suffixes of the named ranges in cell e5 (ie 00, 05, 10, etc) and in g5 a drop down list with the 4 headings for the columns (10, 100, 50, 70)
I want to refer to these 2 values so that in column B, I can get the values of the column chosen for the given named range. For example, the column "100" for the named range THRESHOLD_10. In cell C1, I entered the following formula ="THRESHOLD_"& E5 which gives me the named range name. I entered the following function in the first cell of column B = index(C1,2,G5) but get a #REF! answer. If I write the following formula =index(THRESHOLD_10,2,G5) I get the right value.
how to get about it, and indirect(C1), but still gets a #REF! message. When I evaluate the formula, the named range appears with quotes "" which might be the reason that it cannot work. I am nearly there...but for the syntax and cannot get that working!
Named Formula To Return The Nth Largest Value From Range
May 19, 2009I have a named range which refers to: =MATCH(LARGE($G$5:$G$68,ROW(G5)-4),G$5:G$68,0)+4. It is supposed to find the largest figure in the adjacent column, list its row in cell H5, then the second largest for cell H6 and so on until the end of the data. The data in column G is dynamic and some cells will contain "0" with certain sections of data thus why I need a formula and cannot just use sort each time.
My problem is that when I use the formula as a named range I get "#N/A" and when I evaluate the formula I will get the answer but in array brackets (e.g.{17}) before the final step turns it to "#N/A". The formula will work fine if inputted directly into the cell but as the same formula will be used over three columns and numerous rows I would much prefer to use a named range.
Dynamic Named Range = Last Used Cell In Column; RC In Formula
Apr 28, 2009Can you use Row & Column numbers in a Formula the way you can in VBA?
I want to do the same as Range(Cells(5,2)) in VBA EXCEPT in a Formula
because I want to use named ranges for the Row & column entries. (And I don't want to have to run a macro every time a change is made. The spreadsheet is huge enough already. It's slow on my machine & I have the biggets baddest PC in the company!)
Using Formulas only, (not VBA) I would like to create a Dynamic Named Range, LastUsedRow, which is the ROW NUMBER of the Last Used Cell in Column C
(it would = 470)
Also I have an existing Named Range HeaderRowNum (it = 16)
Currently I have a LOT of formulas like:
=SUMPRODUCT(($E17:$E470)*(--(CO17:CO470>0)))
problem is any new data must be added between Rows 17 & 470
So I would like to create dynamic new forumlas to read like:
SUMPRODUCT( (Cells(HeaderRowNum+1,5) : (LastUsed Row,5)) * (--(Cells(HeaderRowNum+1,93) : (LastUsed Row,93))>0) )...............
Pass A Named Range From A Cell As An Argument To A Formula
Oct 20, 2009I have the following formula which works fine in this form:
View 4 Replies View RelatedPassing Cell Content As Named Range In Formula
Sep 13, 2006how to pass a cell content into a formula as a named range? For instance, I have 3 named range (Budget, Actual, Forecast) and I use the named range in vlookup formulas. But instead of using the named range in the formula directly, I want to refer to a cell where I can type in which named range I want to use. Can this be done? I am attaching a sample spreadsheet to clarify what I mean.
View 6 Replies View RelatedCircular Reference With Dynamic Named Range Used In Formula
Aug 13, 2008I have a problem creating a circular reference with dynamic ranges. I have searched already but can't find the specifc problem. I have a spreadsheet where I use vba code to insert extra columns. Within the worksheet there are sum calculations at the end of each row. When I add a new column within the table I would like the sum calculation to expand to account for this extra column.
Now, I thought that dynamic ranges would be the way to go but the only way I can see to do it creates a circular reference as the CountA function trys to count the cell with the sum function in it.
Determining If Cell Is Part Of Named Range And What That Named Range Is?
Aug 16, 2014Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
Selecting Named Range From Dropdown Validation List To Use In Formula?
Jan 18, 2013Basically on a summary page, on sheet 1 say I have a formula which picks up the unit cost (I have this as an array across 5 years)
What I then want to do is multiply this by a volume driver. I have a list of these drivers on a seperate page, so for convenience lets say DRIVER_01,DRIVER_02 etc. These are also 5 years arrays.
So what I want to do it be able to select which driver I want to use for volume on the summary, from a drop down box I have set up, and then the formula pick up that named range, and not just recognise it as a text cell.
I need the ability to change the driver in the future, hence the drop down box. I can also get the unit array part to work fine, I'm just struggling to get this driver array to work..............
Dynamic Named Range :: Does Not Copy The Formula That References A Cell From Another Line
May 29, 2007I am having a few problems with dynamic named range in excel 2000.
When adding new data to the range, excel extends the range correctly, but only copies some of the formula correctly. It does not copy the formula that references a cell from another line.
I am trying to create a excel spreadsheet and have a formula =e10-e9, which does not copy down.
Insert Formula In Range Of Cells VBA?
Sep 6, 2012i am trying to insert a formula into a range of cells using a For... to loop
This is what it looks like:
VB:
For i=1 To n
Worksheets("Ret_sheet").Cells(i, 8).Formula = "=if(mid(B" & i & ",3,1)=""A"",""PY Campaigns"",mid(B" & i & ",4,3)"
Next i
The row with the formula returns a syntax error.
what the right syntax is? I have read a lot about inserting a formula in a cell using VBA, but i never met the case with a counter (i) usage. I guess the problem might be there.
Insert Formula Into Range Macro
Oct 6, 2007My macro inserts the formulas correctly up until the last loop where I get an Application Defined or Object Defined error on the .FormulaR1C1 line. The msgbox returns the correct values.
iCtr = 0 'data starts on 1
For c = 6 To 14 'columns F to N
iCtr = iCtr + 1
MsgBox ("Column " & c & " Index " & iCtr)
With . Cells(6, c)
.HorizontalAlignment = xlCenter
.NumberFormat = "#,##0;;"
.FormulaR1C1 = "=IF(ISBLANK(INDEX(MyNamedRange," & iCtr & ",1)),"""",'" & Replace(MainPage.Name, "'", "''") & "'!R" & NextRow & "C6)"
End With
Next
Insert Formula In Dynamic Range
Oct 12, 2007I am trying to insert a formula into the cells in a column dynamic range.
I never know how long the column will be from instance to instance.
I have been trying to use the following code,
Sub insertf()
'
' insertf Macro
' Macro recorded 10/11/2007 by bbactadmin
'
'
Do Until myrange.Value = ""
ActiveCell.Range("f10").Select
ActiveCell.Offset(1, 0).Range("f1").Select
Range.Formula = _
"=VLOOKUP(LEFT(E11,3),fam,2,FALSE)"
ActiveCell.Offset(1, 0).Range("f1").Select
Loop
End Sub
I am trying to insert the lookup in all of the cells in the column within the dynamic range.
Insert Relative Formula Into Range Via VBA
Nov 25, 2007I am updating a wsheet via a form using vb to locate next empy row etc.
The issue I have is with the formula's no matter how I try I cannot get the formula to increment with each row. I know I can drag and auto fill on the sheet but I want to use vb if poss. eg
Previous entry to sheet:-
A1=1
B1=2
c1=A1+B1(formula)
New entry via form selecting next empty.
A2=(updated from form.)
B2=(Updated from form.)
C2=(Update code VB)
This is all okay and functional the problem starts from here
I so far have been unable to increment the formula in c1 from A1+B1 to A2+B2 using vb, is this possible or am I just chasing my tail.
Named Ranges On Multiple Sheets With The Same Named Range & I Cant Figure Out How To Do This
Jun 2, 2006I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedInsert Formula Into Non Contiguous Range Via VBA Macro
May 29, 2009I have recorded a macro code for which is as follows. This Macro goes into a worksheet and gives percentile value for a range of data. But this is becoming cubersome as this sheet is 65531 rows and can span multiple spread sheets. Can this be put in a loop of some sort to go through the whole worksheet? ....
View 9 Replies View RelatedMaking Named Range The Last Active Value Used Within Another Named Range?
Jul 19, 2013I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
Date Range (formula Show A Week Number In The 2nd Table )
May 6, 2009I have two tables: the 1st table consists of date range (From and To) and week number while the other table has only dates.
Example:
1st Table
FROM TO WK
3/27/2009 4/2/200914
4/3/2009 4/9/200915
4/10/2009 4/16/200916
4/17/2009 4/23/200917
4/24/2009 4/30/200918
2nd Table
DATE
03/28/2009
04/11/2009
04/26/2009
Need simple formula that would show a wk number in the 2nd table (2nd column)? I.e 03/28/2009 has wk no. 14, etc.
Macro Code To Insert Relative Formula Into Range
Jun 10, 2008I have a formula that works fine in the cell of an Excel spreadsheet but I'm struggling to translate it into VBA (your help please).
The cell formula is:
=If(B2="", "", B2 & " (version: " & F2 & ")")
I want to iterate through all rows in my spreadsheet (about 2000) incrementing the relevant row numbers in the formula @ each pass - eg changing B2 -> B3 -> B4 etc and F2 -> F3 -> F4 etc where column 'B' contains the name of the product and column 'F' contains the version number, resulting in "Product Name (version: 123)" per row.
The closest I've got to this is:
Sub LookupNameInColumnA()
Range("A2").Select
Dim i As Integer
For i = 1 To Selection. CurrentRegion.Rows.Count - 1
ActiveCell.Formula = "=IF(B2="""", """", B2 & "" Version: 999"")" ' problem line?
ActiveCell.Offset(1, 0).Select
Next i
End Sub
This works OK'ish but I want each line to reflect the different data per row. I'm struggling to increment row 'B' and row 'F' in the formula, having tried "B & i + 1" and "F & i + 1" but am getting confused with quotes and concatenating strings within formulas.