I need a quick code to where if a user attempts to open my workbook and they have any other workbooks open at the time that it prompts them with a yes no msgbox asking them to save before continuing. Really i just need the code to tell if there is another workbook open in excel.
View 3 Replies
Workbook 1 has references to workbooks 2,3,4,5,6. When I click the top cross and choose Save All with Workbook 1 active, the deactivate event in workbook 6 runs to the end as it tries to close, but it can't close because workbook 1 references it. So nothing further happens until I click the top cross again. Then everything closes without any more prompts. Not good. If I could ensure workbook 1 closes first that should solve the problem. There may be another way of course.
I have attached 2 blank files to show the problem. test1 references test2. Open test1. It will open test2. Make a change to both files, activate test 1 and click the top cross, choose save all. Nothing happens usually.
I have many worksheets in a workbook that need to be saved if a user changesanything on them.
These sheet names all end in "....SD" and the code needs to only run on those sheets. I have learned alot from the forum but not enough, just yet . . This is what I have so far:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Object
For Each sht In ThisWorkbook.Sheets
If LCase(Right(ws.Name, 2)) = "sd" Then
MsgBox(Prompt:="You must save changes. Save now?", Buttons:=vbYesNo) = vbYes Then ThisWorkbook.Save
End Sub
It doesn't like the 2 "Then's". (Don't laugh - I'm trying.)
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
How do I create a msgbox that tells me that the worksheet is currently open? I dont mean opening the worksheet and the msgbox popping up upon opening but I need the msgbox to show when the page is currently open?
View 9 Replies View RelatedI have Monthly sales sheets that import my cash register data into them. I wanted to set them up to do everything without being there. So I have my task manager open excel at 9:30pm everyday and it runs the macro to import the data into the correct day of the month. Here is the workbook
open macro-
Private Sub Workbook_Open()
Dim dTime As Date
dTime = Time
If dTime >= TimeValue("9:30 PM") And _
dTime < TimeValue("9:40 PM") Then
ImportData
End If
End Sub
This is in my July spreadsheet only. So is there a way to make it know which month spreadsheet to open on the 1st of the month? So come August 1st it will automatically open the August workbook and input the data for the first day? By using the date?
Private Sub Workbook_Open()
MsgBox "Insert Text Here" , vbOKCancel
End Sub
What I would like to do is have a MsgBox open up that states this file is confidential and you click 'I Agree' button, or a cancel "I Decline"
I do not want the spreadsheet to be visible until they click on 'I Agree' button, and then if they click cancel, the Excel closes.
This is not a huge security issue, just a reminder for the Top Brass not to email out the file. This is for looks and show only
I have a presentation that I open from a short-cut. After the "Welcome Page" is opened, I want to open a second workbook in a new instance of Excel after 4 seconds.
I think that I can open the new instance of excel, but I don't know how to activate the macro after 4 seconds.
I'm sure there is a function someplace for this that can be used in a macro.
Then, after the second Workbook is opened, I want the Welcome Page "Workbook" closed, leaving the second Worbook open.
Is it possible to have a message box appear after a WorkBook is closed. I have code that automatically closes a work book after a certain amount of inactivity and would like a message box to inform the user what happened.
Sub CloseBook()
Call StopCycle
Unload CloseTimer
Unload EnterPassword
ThisWorkbook. Saved = True
ThisWorkbook.Close
MsgBox "Your Excel Workbook Closed Due to Inactivity"
End Sub
I want to run a program from my PERSONAL.XLS workbook, however, after a piece of code
where I close all the open workbooks different from PERSONAL.XLS, the code stops running.
How can I contour this?
Down is the piece of code used to close the other workbooks and the msgbox I want to show, along with a DialogBox:
For Each W In Workbooks
If W.Name ThisWorkbook.Name Then
W.Close SaveChanges:=False
End If
Next W
MsgBox "Abrir apenas a Origem a actualizar, que deverá ser obrigatoriamente do mês corrente ou do anterior", _
vbOKOnly + vbInformation, "Atenção"
Application.Dialogs(xlDialogOpen).Show
My Splash screen opens a few seconds after the workbook has loaded. Is there a way to make the workbook open minimzed until the the splash screen closes then open properly? What I trying to say is that only the splash screen is visible until it closes.
View 5 Replies View RelatedActually i've downloaded Tracking report of my SPO and this report is on 4-5 csv files (1 file per week). I have to gather data from these 4 files into one Worksheet. I have to do this with command button on my worksheet; with Open file dialogue box (i want to locate the csv files).
CSV files are something like that (I need only first 4 columns):
ABCDE1Name MSISDN Date Location MapLink 2M. Younus Safi "923***550577" "2011-10-07 20:36:18" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 3M. Younus Safi "923***550577" "2011-10-07 19:36:26" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 4M. Younus Safi "923***550577" "2011-10-07 16:39:58" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 5M. Younus Safi "923***550577" "2011-10-07 15:37:23" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 6M. Younus Safi "923***550577" "2011-10-07 14:37:05" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com"
and my Worksheet is like that (With a command Button):
I want to import first 3 columns of csv file on first 3 columns on my worksheet; leave 2 columns blank and then import the 4th column... now for example i have done importing data from 1st csv file and the data is on 50 rows.. i click the command button again, locate the 2nd csv file.. do the same thing (import 1st 3 columns, 2 blank, then 4th) --from 51st Row-- and so on...
ABCDEF1NameMSISDN DatedBlankBlank Location2
3
4
5
6
7
I would like to write a Sub that will see if a workbook is open and if it is not then open it. I know how to have a macro automatically open a workbook, but I run into problems when the macro runs and tries to open an already opened workbook.
View 5 Replies View Relatedthis is a relatively straightforward query, would be obliged for any tips on same. I have the following piece of -
View 2 Replies View RelatedCreate a full copy of an open workbook (eg. activeworkbook MyFile.xls) using VBA, with the new copy (eg Book1.xls) open as well ,without having to save a copy first then open it ?
View 9 Replies View RelatedI did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet()
If ActiveSheet.Index <> Sheets.Count Then
Application.DisplayAlerts = False
Set ws = ActiveSheet
Sheets(ws.Index + 1).Delete
ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2")
'Moves active sheet to beginning of named workbook.
'Replace Test.xls with the full name of the target workbook you want.
Application.DisplayAlerts = True
End If
End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
I have an Excel application in which I use the Workbook Open event to show a userform.
This works fine when Excel is not already open, but if another Excel workbook is already open, the Workbook Open event does not work.
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
I have data that daily needs to be refreshed and printed to pdf.
I figure the simplest way to do this would be to task schedule the workbook to open daily. Then on open it will refresh the data, print it after all data has been refreshed and close the workbook.
I set it up originally without the need to print so I have all the queries set to refresh when opening the file, however when I now try and put the code to print to pdf on the workbook open event it runs before the queries are finished running. (Query notes: queries were created through Microsoft query, and are accessing a MySQL database queries set to refresh when opening the file queries set to enable background refresh).
I run a model in Excel that automatically saves my file every xx iterations. After saving the file I want to make a backup of the file. Tried
[Code] .....
but get a permission denied error message.
I don't want to use .SaveAs as it is a huge file that takes a while to save and SaveAs has a tendency to break links that should not be broken..
Here's my macro:
Code:
Sub CopyRow()'
'Copies row to new sheet, highlights it, marks column 'A' as copied.
'
Dim cCell As Range
Set cCell = Selection.Cells(1, 1)
Selection.Copy
Sheets("Sheet2").Select
Rows("2:2").Select
[Code] .....
Is it possible to modify it to paste into a different workbook called c:filesDestination.xlsm, instead of the existing workbook (Source.xlsm)? The destination sheet name is the same (Sheet2). It's OK if both workbooks are open at the same time.
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer
'Dim thiswb As Workbook
officen = Range("A2").Value
Set thiswb = ActiveWorkbook
' Open the Active Info file
Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx"
' Dim sourcewb As Workbook
Set sourcewb = Workbooks.Open"Active 20080616.xls"
Sheets("officen").Select
RowCount = ActiveSheet.UsedRange.Rows.Count
Range("B2").Select.............................
is it possible to write vb code to open the workbook, scroll through everysheet? extract the values from each worksheet?
let's just say, I only know the workbook name, but not the sheets of the name inside. So the vb code could scroll through every worksheet without knowing the worksheet name, only the workbook name(workbook.xls)
This is pretty basic I just don't know what command to use. I have a macro that's supposed to copy data from one workbook to another, it works fine but In the macro it open the other workbook then closes it. I would like the macro to not reopen the second workbook if it is already open (since reopening causes it to lose the newly updated info). I think it can be done with a If command but I don't know which tried the following: If workbooks("M:/database") Is Open but of course 'is open' doesn't work, but can anyone tell me what to use instead.
View 2 Replies View RelatedNeed some VB Code to check if a workbook is open or not. Either way, it needs to be opened and made active.
I have tried using some of the answers already on here but not getting anywhere.
Looking for a macro, to run upon opening file, that opens a linked file and if the file is already open does nothing.
View 2 Replies View RelatedI have set up a workbook (wb2) that has external references to another workbook (wb1). All is good and works fine when you open the 2 files from windows explorer. I have then put a hyperlink to wb2 from wb1. When you click on this link the file opens but throws up errors saying some of the named ranges cannot be found?
View 3 Replies View RelatedPlease see attached files.
Book1.xlsx
test.xlsm
I am trying to copy the emf image object from "Book1" into the "test" workbook whilst the test workbook is open and Book1 is closed. The code I have put together currently sort of works, I mean that it copies the text data over but does not copy the object which is what I require.
im looking for some code to transfer cells a3,d6,f9,i6,k10 and i18 from open workbook named "hello"
to
closed workbook named "goodbye" and input to next available row
a3 to a1
d6 to a2
f9 to a3
i6 to a4
k10 to a5
i18 to a6
How to Automatic open others Workbook when we opened the Master Workbook.
Examp.: I have a workbook (Master.xls), and when this file be opened, and then others workbook (Transactions.xls, Order.xls, etc.) is opened too.
