This is pretty basic I just don't know what command to use. I have a macro that's supposed to copy data from one workbook to another, it works fine but In the macro it open the other workbook then closes it. I would like the macro to not reopen the second workbook if it is already open (since reopening causes it to lose the newly updated info). I think it can be done with a If command but I don't know which tried the following: If workbooks("M:/database") Is Open but of course 'is open' doesn't work, but can anyone tell me what to use instead.
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook Copy range (c8,d69) Close work sheet Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
I would like to write a Sub that will see if a workbook is open and if it is not then open it. I know how to have a macro automatically open a workbook, but I run into problems when the macro runs and tries to open an already opened workbook.
My Splash screen opens a few seconds after the workbook has loaded. Is there a way to make the workbook open minimzed until the the splash screen closes then open properly? What I trying to say is that only the splash screen is visible until it closes.
I have Monthly sales sheets that import my cash register data into them. I wanted to set them up to do everything without being there. So I have my task manager open excel at 9:30pm everyday and it runs the macro to import the data into the correct day of the month. Here is the workbook
Private Sub Workbook_Open() Dim dTime As Date dTime = Time If dTime >= TimeValue("9:30 PM") And _ dTime < TimeValue("9:40 PM") Then ImportData End If End Sub
This is in my July spreadsheet only. So is there a way to make it know which month spreadsheet to open on the 1st of the month? So come August 1st it will automatically open the August workbook and input the data for the first day? By using the date?
I did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet() If ActiveSheet.Index <> Sheets.Count Then Application.DisplayAlerts = False Set ws = ActiveSheet Sheets(ws.Index + 1).Delete ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2") 'Moves active sheet to beginning of named workbook. 'Replace Test.xls with the full name of the target workbook you want. Application.DisplayAlerts = True End If End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
is it possible to write vb code to open the workbook, scroll through everysheet? extract the values from each worksheet?
let's just say, I only know the workbook name, but not the sheets of the name inside. So the vb code could scroll through every worksheet without knowing the worksheet name, only the workbook name(workbook.xls)
I want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
I'm trying to open multiple files based on an array of WBnames that are on a 'Dashboard' tab, but I only want to open them if they are not already opened. The code below doesn't seem to check if they are open and just opens everything....
VB: Sub OpenWorkbooks() Dim WorkbookOpen() Dim WBnames() As String 'Array of WorkBooks to be Open Dim WorkbookCnt As Integer
I have data that daily needs to be refreshed and printed to pdf.
I figure the simplest way to do this would be to task schedule the workbook to open daily. Then on open it will refresh the data, print it after all data has been refreshed and close the workbook.
I set it up originally without the need to print so I have all the queries set to refresh when opening the file, however when I now try and put the code to print to pdf on the workbook open event it runs before the queries are finished running. (Query notes: queries were created through Microsoft query, and are accessing a MySQL database queries set to refresh when opening the file queries set to enable background refresh).
Code: Sub CopyRow()' 'Copies row to new sheet, highlights it, marks column 'A' as copied. ' Dim cCell As Range Set cCell = Selection.Cells(1, 1) Selection.Copy Sheets("Sheet2").Select Rows("2:2").Select
Is it possible to modify it to paste into a different workbook called c:filesDestination.xlsm, instead of the existing workbook (Source.xlsm)? The destination sheet name is the same (Sheet2). It's OK if both workbooks are open at the same time.
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer 'Dim thiswb As Workbook
officen = Range("A2").Value Set thiswb = ActiveWorkbook ' Open the Active Info file Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx" ' Dim sourcewb As Workbook Set sourcewb = Workbooks.Open"Active 20080616.xls"
I have set up a workbook (wb2) that has external references to another workbook (wb1). All is good and works fine when you open the 2 files from windows explorer. I have then put a hyperlink to wb2 from wb1. When you click on this link the file opens but throws up errors saying some of the named ranges cannot be found?
I am trying to copy the emf image object from "Book1" into the "test" workbook whilst the test workbook is open and Book1 is closed. The code I have put together currently sort of works, I mean that it copies the text data over but does not copy the object which is what I require.
How to Automatic open others Workbook when we opened the Master Workbook. Examp.: I have a workbook (Master.xls), and when this file be opened, and then others workbook (Transactions.xls, Order.xls, etc.) is opened too.
Is there a way to run a macro in an open workbook when the workbook becomes activated or deactivated? So if I have workbook A open with a macro in it and workbook B open as well, can I have the macro run on workbook A when that becomes the workbook I see on my screen?
I have two workbooks. One is a no-nonsense form interface that my bosses will use to enter safety information. I'll call this workbook "Form". This file is stored locally on each of their computers. The other workbook is stored on a common drive. I'll call it "Master".
When my bosses fill out the Form and click "Submit", the Master file is opened, and certain cells are populated based on information entered in the Form. This is the code I am using to make this happen:
I have built a sub that prompts the user for a folder then opens every workbook in the folder 1 at a time to get stats on the contents of each workbook. Worked like a dam until I ran into an unexpected bug. Some of the users built on open events in their workbooks. ...
Right now my routine inventories workbooks to get formula counts, cell counts, most complex formula, highest value... it does this by looping throught the sheets and the cells. If there is a way of obtaining those stats without opening the workbook I may need to rethink a lot of my work.
way to suppress the code in the target workbook I open through workbooks.open
how to make a MsgBox open anytime a cell in Column A was double-clicked--and the content of the MsgBox was from the cell in the same row in column Z. I've now realized the double-clicking isn't an ideal solution, as it's easy to click in another cell and mess up all the formulas.
(1) Code that deactivates the "edit directly in cell" option when the workbook is opened.
(2) Code that opens the MsgBox when a cell in Column A is clicked just once (or similarly less fool-proof than double-clicking or right-clicking).
Dim myname As String myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook. The Quickbooks file opens fine. The Excel workbook never appears to open but I do get the full file pathname to my excel workbook returned which I then parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.