Macro To Find Variable User Defined Cell In Worksheet
Nov 7, 2013
I have a worksheet named "ABC". In row 4 of this worksheet, each cell from G to BG is numbered from 1 onwards and each cell has a unique number. I would like to have a macro ask the user through a pop-up question box which column data should be calculated in. For example, if the user types "1" in the question box, the macro will go to column G which has "1" in cell G4 and will select G5 the cell just below the column the user defined and calculate the formula.
I am currently working in an application in which I use the following user defined types:
Public Type correlationstruct corr As Variant corrstd As Variant lower As Variant upper As Variant support As Variant End Type
I have a public variable called myctafund, of type ctafund:
Public myctafund As ctafund
My problem is the following: When I need to update myctafund, I first want to clean it entirely before putting new values, so as to be sure older values do not stick around (I do not necessarily overwrite all the values of the mycta type).I can't figure out a way of clearing the entire myctafund variable in one shot. I tried:
myctafund=empty
but I am granted by a nasty excel error. I'd like to avoid writing 200 lines of code just to clean the entire variable.
I am attempting to use the Find and Replace code you assisted with me into another project, But I am missing something. I keep getting a Variable not define error when I go to search for a CMM # in the add a referral form.
I have created a userform that once the user clicks the okay button, the information is transferred to a worksheet template named 'PO Template', copied, and renamed. That portion works great. I then have code for a summary worksheet named 'PO Log' that finds the next empty row on the log and enters a formula referencing back to the newly created 'PO Form' (note - 'PO Form' is a variable as the actual worksheet name changes with the user input). The formula on the 'PO Log' references the 'PO Form' literally, which gives me a REF! error because there is no sheet actually named that. I've tried defining POForm in the code as a string so I can enter it into the formula code but I get an error because it's already defined as a variable. I've entered the sub routine for clicking the okay button below:
Code: Sub OkayButton_Click() 'Make PO Template Active Sheets("PO Template").Activate
have seen macros that create a seperate sheet & save by tab number etc, & wonder if its possible to save each sheet in a workbook as the value defined in each sheets cell A2. is there a vb macro available to do that ? if so where ?
The below macro(found in VBA and MACROS for Excel) works well but I need a few modifications
Option Explicit
Function SortConcat(Rng As Range) As Variant 'Rng —The range of data to be sorted and concatenated. Dim MySum As String, arr1() As String Dim j As Integer, i As Integer Dim cl As Range Dim concat As Variant On Error GoTo FuncFail: 'initialize output SortConcat = 0# 'avoid user issues If Rng.Count = 0 Then Exit Function 'get range into variant variable holding array ReDim arr1(1 To Rng.Count) 'fill array i = 1
1)My array is 128 cells wide(AT3:FQ3) and i get a type mismatch--seems to work well for 36 cells
2) These cells contain dates and numbes---all i want to sort and/or display is the numbers Note: some numbers are in parenthesis and other are either single or double digits. Example: numbers are (8/8),8,10,(HG6),4,6,etc. And Dates are 04/06 format (no year, and no parenthesis)
3) All empty cells in the array show up in the above SortConcat function as zero, and are un-necessary
4) The final output should be no more than 6 concatenated numbers, so column width is not an issue, and the bubble sort is really not necessary but would be a nice feature
I am looking to create a macro that will ask the user to define the row number of the beginning and ending locations that they would like to print. The columns are fixed in that the first starting row will be from column A and the ending row will be column M.
I have built a pipe tally used in the oilfield that keeps track of large amounts of pipe figures but very often is the case that there is the need to print a section of the tally data in reference to a certain depth. With the vast knowledge base located here I was able to build the first macro that prints the whole active tally but now I need something more refined.
Below is one of the copies of the macro that I was trying to get to work and it is missing a couple of things but the most important part shows up and that is how to get the inputbox variables into the defined print area.
Sub TallyVariable() Dim StartRow As String Dim EndRow As String StartRow = InputBox("Please Enter Starting Row you would like to print") EndRow = InputBox("Please Enter Last Row you would like to print") ActiveSheet.PageSetup.PrintArea = "A" & StartRow.Address:"M" & EndRow.Address End Sub
In my spreadsheet, one user defined function i.e. pfizer is there which I want to convert into macro and use it in column H of sheet2 [sheets("sheet2").columns("H:H").select]
What should be the VBA code for this.
when I have started the macro with keyword as application. . the function is not populated.
-->I am able to populate the data with the formula like this = pfizer("I1")
Trying to convert an Excel 2003 macro to work in Excel 2007.
The problem line is
Dim MyDataObject As DataObject
I suspect the problem is a Missing Reference, but I cannot figure out which one. I have the same ones (in 2007) as 2003 except for one which is not showing
Microsoft Forms 2.0 Object Library
Is this the one it needs? It is called something else in 2007?
The ones I do have ticked are
Visual Basic For Applications Microsoft Excel 12.0 Object Library OLE Automation Microsoft Office 12.0 Object Library Microsoft ADO Ext. 2.8 for DDL and Security Microsoft DAO 3.6 Object Library Microsoft ActiveX Data Objects 2.8 Library Microsoft Scripting Runtime Microsoft XML v2.6
I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.
The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.
Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application ' ' do nothing for now 'End Sub
I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.
I am trying to capture with Worksheet Change a command bar action like paste but I am getting an error :
“User-Defined type not defined”
Do I need a library of sort in References ??
Public Sub Right_Click()
Dim oControl As CommandBarControl
For Each oControl In CommandBars("Cell").Controls Debug.Print oControl.Caption If oControl.Caption = "&Paste" Then oControl.OnAction = "MyPaste" End If Next oControl
referencing constant cells in custom functions. This is a sample of my code:
Code: Select Case Name Case Is = "Ball" Valve_Days = [V4] + Cushion Case Is = "Check" Valve_Days = [V5] + Cushion
Now, the problem is when I open the workbook up, or someone downloads the file from the server, it resets all fields to div/0 based on what sheet the last user 'Saved' the document on. I think this is occurring because it doesn't know which sheet to pull the value V5 from? The problem never started to happen until I added another sheet in the workbook. Is there a way to tell VB that it isn't just cell V5, but it is cell V5 on Sheet 'X'?
When I try to complile my VBA project, I get the following error "User-defined type not defined" but the compiler doesn't point to any line.
I remember what I did last was to rename a form and a Module, but I replaced their old names in all my code with the new ones ... Does this have anything to do with the error I am getting ?
My workbook has sevaral sheets reresenting the payment methods used by our customers. Each sheet has a range of cells F9 to Q33 which should hold the value of payments for each working day. e.g. F9 represents April 1st, F10 represents April 2nd.
A daily list of values is supplied which then transfers that day's value into cell E1 on each sheet.
On each sheet I manually have to take the value in E1 and copy and paste special: value into that day's cell e.g. today I will paste into cell K21. The cell value then looks like this '12134.12'. I then edit the cell to put a calculation on the end to divide the value by the value in another cell on the sheet. The cell value ends up like this '=12134.12/$G$5'. This is so I can see the values in thousands of pounds or by changing the value of G5 to 1,000,000 in millions.
Tomorrow I will do the same but in cell K22.
I have to do this on 15 worksheets and I have been struggling to get a macro together to do this. I can get as far as copying and pasting but I don't know how to add the calculation onto the end. I also would like to be able to input the cell destination daily probably with an input box so I can be flexible and potentially run it sevaral times if I need to catch up on previous days.
So I have 2 sheets from a much larger worksheet where I wish for the first sheet to extract a row of values, one at a time from the second sheet using a range of numbers I enter as reference for where to look for the data. Sheet 1 can be thought of as a summary page and Sheet 2 is where data is stored.
I need to first check if any data under Sheet 2 column B fall within a specified range of numbers and if any of those numbers are found I want it to grab the largest and latest number from that range and pull all the data from certain columns in that same row and place it into Sheet 1, one column value at a time.
Sheet 1 A1 = A range of numbers as text. 10-15, 16-20 etc Only one range is entered. This also tells me what results I'm looking at. Sheet 1 B4:B14 = Destination cells for the individual data I'm wanting to pull from Sheet 2 columns H:P. B4 wants H, B5 wants I, B6 wants J etc
Sheet 2 column A = A3:A102 are numbered 1:100. Sheet 2 column B = A series of numbers anywhere from 10-70. Always in sequence and they can repeat. 10,10,11,12,13,14,15,15,15,16 etc. Ranges from B3:B102. Only one number per cell. Sheet 2 columns H:P = Data in H3:P102 I want to extract to Sheet 1 B4:B14.
Now lets say I want a formula for Sheet 1 B4 which wants a value in Sheet 2 H. If Sheet 1 A1 = 10-15, I want to check whether Sheet 2 column B has any values equaling those and then tell me which row that last number appeared in. Example: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. (B6 is outside range and B4 isn't the last time the 14 appears.)
Then, knowing B5 is the value I want, find which row it is in (row 5 in this example) or use the number in A5 (3) and then find my way to column H (H5) where the value I want to pull is.
Example 2: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. Sheet 2 H4=10, Sheet 2 H5=32, Sheet 2 H6=42. Place "32" from H5 into Sheet 1 B4.
I'd like to also have some error control so I'm not trying to pull data from blank cells if it's relevant. Maybe check if Sheet 2 X3=0 and if it is, do nothing as no data appears if the cell is 0.
I have put a lot of time into trying to solve this myself but I feel way out of my depth. I've tried going step by step but I can't seem to figure out which functions are relevant and also things like how to return the range that the A1 values appear in or if using MAX, not having it return values outside of A1's range also.
Sub Test() Const cURL = "Website Here" 'Enter the web address here Const cUsername = "XXXXXX" 'Enter your user name here Const cPassword = "XXXXXX" 'Enter your Password here
Dim IE As InternetExplorer Dim doc As HTMLDocument Dim LoginForm As HTMLFormElement
[Code] .......
I get the error User Defined type not defined on line:
Code: Dim IE As InternetExplorer
Do I need to use references? Is there a quick fix for this?
I have code that works for a particular website but I am having trouble making it work for others. This code seems more flexible than the other code:
Code: Option Explicit
Public Sub Press_Button()
'make sure you add references to Microsoft Internet Controls (shdocvw.dll) and 'Microsoft HTML object Library. 'Code will NOT run otherwise.
[Code] ........
My end goal is to log on to several websites and pull data out of tables on the websites back into excel so that I can have a one stop shop instead of logging into many websites manually.
This code works fine when I use it, but not when a co-worker uses it on his PC. The code and VBA references are the same. He gets the "User-Defined Type not defined" error. I'm wondering if there is an Outlook setting that may blow this up.
the code was working on his PC and then it stopped though no changes were made to the code. That's why I think it may be blocked by an Outlook setting.
Set appOutLook = CreateObject("Outlook.Application") Set MailOutLook = appOutLook.CreateItem(olMailItem) MailOutLook.Subject = "E-mail"
I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim startDate As String Dim stopDate As String Dim startRow As Integer Dim stopRow As Integer startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)") If startDate = "" Then End stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)") If stopDate = "" Then End startDate = Format(startDate, "dd/mm/yyyy") stopDate = Format(stopDate, "dd/mm/yyyy") startRow = Worksheets("sheet1").Columns("A").Find(startDate, _ LookIn:=xlValues, lookat:=xlWhole).Row stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _ LookIn:=xlValues, lookat:=xlWhole).Row Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select
I've made a macro that inserts an entire new row above a specified cell, then updates each column of that row using offset.value and various constants and inputbox variables. Works great so far, unless I try to apply a validation rule to one of the cells.
The code I'm using to add the validation works okay when referring to a specific cell by reference e.g:
With Range("A1").Validation
etc...
However, when I change it thusly:
With Sheet2.Range("LastRow").Offset(-1, 5).Validation .Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _ xlBetween, Formula1:="=Departments" .IgnoreBlank = True .InCellDropdown = True End With
It doesn't like that one bit.
This is part of a private Sub attached to a button in the same sheet. I've had a scan through the archives looking for validation threads, but couldn't find anything that refers to problems with offsets (if indeed that is the problem here).
the first time font.bold is set to true, it completes w/o error. The bolded line returns 'application defined or object defined error 1004'. Ive tried activating the new sheet immediately before setting bold (like the first time it gets set) but it still errors.
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
This is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB: With Sheets("PICKLIST") myFind = "*" & .[c1].Value & "*" End With If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB: With Sheets("PICKLIST") myFind = "*" & CHOICE & "*" End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
Due to the economy we are only scheduling days to work one week ahead which leads to alot of phone calls. The gaurds who get the calls then search thru a printed spreadsheet looking for a clock number or last name. I realized right away they should just look at the file on the computer and due edit - find. The problem is they due not use computers unless printing and they looked at me like I was talking in a different language. So I want to edit this macro below so it will allow user to type in search criteria instead of using same search criteria every time. Here it is 70039. I also need to place a shortcut or button to this macro on the toolbar or sheet and do not know how. How do I stop "remove macro or enable when file is loaded"?
I'm having trouble getting a User Defined formula to work. I received an email containing a User Defined formula for SUMCOLOR and COUNTCOLOR. The first sums all the values in like-colored cells, and the second counts all the cells of like-color in a given range. The VB code for the module is as follows:
Possibility of creating "on measure" functions for the necessities of every customer, but I have some things to ask in merit and I hope that you can answer to me:
- which are the differences between a User Defined Function and a Macro? - also User Defined Function is written in Visual Basic?
