how to adapt the solution so it would work in multiple cells. Since I was told to start a new thread, here it is. I want to format a cell based on its contents, If it has one of three entries, it should be greyed. I then want to use the conditional format across the whole page, but the solution given in the other thread refers to a single cell, how can I do this without that reference?
Is there a way to programatically count the amount of conditional formatting rules in a workbook as i have been given a workbook which performs really slowly and the amount of rules seem to be a lot just wanted to count them
I want to set a conditional formatting rule that makes a cell red or green depending on if the value in the cell is larger or smaller than the value in another cell +2% or -3%. If neither of these conditions are met no formatting should be applied..
a) In the cell (R104) where the condition is set I have the following formula: =if(BP104=0;"";BQ104/BP104) (the values in BP104 and BQ104 is retrieved from a database)
b) The conditions I've set in R104 are the following
1) =isblank($R$104) (condition: "nothing")
2) =$R$104<$R$106-0,02 (condition: "red")
3) =$R$104>$R$106+0,03 (condition: "green")
c) In cell R106 the value there is a value of 90%
The conditions seem to work fine when the value in R104 is higher or lower than the conditions set in 2 and 3 above but when the value is blank in R104 the cell goes green, which it shouldn't.
Allows me to check like 10 different text values and return false for all of those in the conditional formatting rule. When those are not present, the conditional format is true thus applying the format.
I tried =NOT(FIND("text1",$A$1,1)) It did not work because I believe this statement doesnt give the rule its TRUE value its looking for.
I am having trouble with this, to clarify I need the below... Cell has conditional formatting checking for text1 text2 text3...text 10ish and if they are present nothing will happen and if they arent present then format the cell.
EDIT: to clarify, the code should look for either text1 or text2 or text3 so on...
formatiing a cell, e.g. change color to RED, in the event the value is a duplicate. To make it clear, I need to show that if the Serial Number of a product just entered is a duplicate and should change color when a combination of conditions is true. i.e. if a "part number" AND the currently entered "serial number" already exist, the entered serial numbers should change color.
I'm trying to set up conditional formatting in a spreadsheet where there are 3 possible correct letters that can be entered into a range of cells and if one of these letters is not entered then I would like the cell to be highlighted.
To be more precise, it's an accommodation spreadsheet and in each cell if someone needs a room for that particular night (each night is represented by a separate column) then a letter is used to indicate what type of room they require i.e. "k" is a king room, "s" is a Suite and "t" is a twin. I don't want to force people to have to select from a list which would be the obvious solution to this as it is simply too cumbersome for the amount of data entry we do.
However i want to ensure that if someone accidentally enters anything other than t,k or s then the cell is highlighted. We work in large spreadsheets covering months of dates so to manually have to find any errors is hugely time consuming.
I am trying to do a conditional formatting based on the result in one cell but it needs to add up multiple cells first to determine which conditional format it needs to use. I am not sure whether I need to do a formula conditional format or whether to use cell is greater than with =sum() in it. I have tried both but neither seem to be working correctly. I have attached an example of the spreadsheet and the conditions I am trying. I am using 2010 version.
Basically, the closing amount for Monday in prod 1 (cell c4), needs to display in red if sum of the cumm value for Tuesday (L4), Wed (N4), Thur (P4) & Fri (R4) is greater than that value or display in amber if the sum of the cumm value for Tuesday (L4), Wed (N4), Thur (P4).
I need to complete the same for the whole column for Monday (col C) for each appropriate product. Then the same for column B but this will sum different cells but the principal will be the same.
I want to change the colour of rows depending on the letter that is in a column. I want it to do it over all the sheets of the document. In the G column there will be letters like 'W' and 'L' that signify something and I want to make it clear by changing the row colour fill. I've tried a few formulas I found by googling but they didn't work. I should point out that the letters are connected, so if I put a 'W' on the second sheet it appears on the first sheet as well.
I have created a spreadsheet that will show me where people are working on what day, etc. however i want to be able to filter by week to create a list of say 2 particuar shifts - in this case "syl ld" and syl n so that the spreadheet would show the people who are working these shifts and I could print out. I have tried Multiple Filters and Advanced search but cannot achieve what I require
Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:
etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.
I have a table where Sales are in Column B and a % calculation is in Column E. I want to highlight the cells in green that are over 40% and that also meet the criteria where the sale in that row is above $100.
In conditional formatting I tried to use =and(b4>100,e4>40%) but it did not do anything. I am also okay with using a nested if statement.
How do i make a formatting rule permanent to certain cell's.
The steps i followed:
I selected the columns and rows to be formatted. in conditional formatting I selected new rule. then selected the second function, "format only cells that contain" in format only cells with: specific Text , then " ending with" Over Issues.
in format i selected the font and fill.
I saved and close the document, after reopening the rule is no longer working.
I'm desperately trying to work out conditional formatting for different dates.
I have =TODAY() in F3
In the remainder of column F (from F19 to F625) I have either blank cells or varying dates (dating back to 2011 and dates going forward into 2014).
I need to Red/Amber/Green the following:
Green = any dates which are 45 days or more in the future from today's date Amber = any dates which are between +1 and +45 days in the future from today's date Red = any dates which are today's date or a date in the past
I can get one or two of the criteria working i.e. Green and Red, but not the Amber. Is one overriding or ignoring another?
how to create VBA code for conditionally formatting a column of dates that have expired. My unique challenge is that I first need to associate the item attached to the date with the expiration date of a particular group. Therefore, I have to first match the Item label with the appropriate group, and then I need to evaluate the expiration dates of both the Group and the Item. If the Item expires before the Group expires, then I need the Item date to be formatted in bold and with a red font.
Attached is a sample spreadsheet.
Thoughts about how to accomplish this with VBA? By the way, VBA is the necessary approach due to the fact that the data is updated several times per day, and all existing data is erased prior to uploading new data.
I have a column of information. The first cell has the record number. Then there are criteria the record must meet. If any of the cells have N for nonCompliant, i would like for the record number to change colors. If it were only one citeria, i think i know how to do that, but because there are as many as 10 I'm not sure how to make it change colors for all ten unless i do it one cell at a time.
Also there are several thousand columns on different worksheets, how do i apply the conditions to each column without doing it manually?
I am trying to figure out how to set up a spreadsheet, that comprises a list of open-entries, wherein the user will insert their information and a % out of 100 assigned to them; the entire form, in the end, cannot go beyond 100%, so each entry has to be done correctly...
BASICALLY my problem is that I am trying to set up the " Total %" cell, which is already assigned the formula "=SUM(D5:D16)" (D5 through D16 being the cells in which %'s are assigned) so that it will auto-populate with the appropriate color/error if the %'s are either insufficient (short of 100%) or exceeding (above 100%). What I had been trying to set up (and have successfully set up in other spreadsheets, however under slightly different circumstances) is a Conditional Format in which the first (with the color Red for "exceeding") was " =If(SUM(D5:D16)>100,SUM(D5:D16),SUM(D5:D16))
" So regardless of exceeding, exactly met, or insufficient totals, it would post the total entered, BUT assigning the color red, so that IF it did, in fact, total higher than 100, it would appear red. A similar formula would be applied to Green (reflecting "on target") in which the formula would be " =If(SUM(D5:D16)=100,SUM(D5:D16),SUM(D5:D16))"
Now the problem is: this is not working for the SUM of the cells. In my previous experience with Conditional Formatting and color assigning results, it had been with the AVERAGE of two columns of cells.(worked without a hitch.)
I have a worksheet titled "detail" containing 3 cells which automatically and independently change colour subject to their proximity to various dates. On a new worksheet titled "overview" in the same workbook I would like to have one cell which changes colour if any of the 3 cells in the other worksheet are triggered.
I have a conditional format that does not seem to be working for me. Cell B2 has a drop down optionSelect, No, Yes); Cell B3 is supposed to be conditionally formatted to return the following results if the criteria is met:
If B2 is equal to No or Yes then colour should become Yellow If B3 is >0 then colour should become Blue
The problem is when B3 is greater than 0 it does not change the cell colour to Blue.
B3 Conditional Format #1 is =AND(ISTEXT(B2),B2<>"Select") turn background to yellow B3 Conditional Format #2 is =AND(ISNUMBER(B3),B3<>0) turn background to blue
See attached for spreadsheet with conditional formats
I am drawing a blank. I want to use conditional formatting in cell b2 that will outline the cell(I know how to do that) based on a formula. The formula I need would determine if cell a2 is 26,27, or 28. Or function just returns true/false. I would rather not use 2 formulas.
I would like to have excel check if eight of ten of cells in a row are above a certain criteria, then if they are format the tenth cell to be red...so excel checks the ten cells above and if eight of them are above a certain number then that cell shades red.
The code segment from "Get Around Excels 3 Criteria Limit in Conditional Formatting" works perfectly if I type the variable directly into the cell, but not in a range of cells. That is to say, if I copy the source cell to a range of cells I receive a "Run-time error 13: Type mismatch" error". Is there a way to get around this? This is the code segment I've tried in the worksheet.
Private Sub Worksheet_Change(ByVal Target As Range) Dim icolor As Integer If Not Intersect(Target, Range("b2:q53")) Is Nothing Then Select Case Target Case "IBBCH", "ibbch" icolor = 36 'light yellow Case "OBBCH", "obbch" icolor = 34 'light turqoise Case "OBBRDG", "obbrdg" icolor = 35 'light green Case "LNCH", "lnch".........................
Column b in sample is conditionally formatted based on it's values. I want to also apply that same formatting to the person's name in the chart in D2:I9. For example, Jeff is in bottom 50% so cell B2 is shaded red with red text. I would like to apply that same red shade and red text to all the cells in my chart that say Jeff. Also, as example, all of the cells in my chart that say Kelsey would be formatted with green shade/green text and so on...
I need a macro that will highlight a row based on a cell criteria. I have used conditional formatting but there is a lot to format and has dramatically slowed the sheet down. However, I know nothing about macros/vbas.
E.g. If it states JI sent then I want the whole row to be highlighted light green.
App form needed = peach Waiting list = light blue Cancelled = red font strikethrough DNA = purple font strikethrough.
Also - it could well be that in the row it has App form received, JI Sent and DNA all in 1 go. So ideally I would want that row to be highlighted light green with purple font strikethrough.
Booking Status JI Status Date JI Sent Attendance Cancellation date Chargable / non chargable Cancellations Chargeable / non chargeable DNA Date taken Time taken Event Title Start Date Time
I have a gantt chart that was built in excel. I need to shade cells in the timeline based on persons title under each project.
I can provide a snip of what the layout looks like for a better visual. I want the PM's Green, Supers Yellow and Persons Reporting Orange.
To get the green bar shown is using formula: =SEARCH("Project Management",$E17) , The issue with this is it fails to consider the start finish dates. For this particular project it works but when the formatting is "dragged down" the issue arises.
I need to be able to get a macro to do this. I recorded the macro. The conditional worked, but when I cleared it and then ran the macro, it highlighted all of the wrong stuff. Here is what I want to do: In column(AJ) I have cities with Prefixes or not In another column (AV) I have Criteria1 and in yet another, I have criteria2 (CB)
City (AJ) Criteria1 Criteria2 SCRNRTH_SCRM1 FALSETRUE should fail test A9_SCRNRTH_SCRM1FALSETRUE A9_SCRNRTH_SCRM1FALSETRUE A9_SCRNRTH_SCRM1FALSEFALSE should fail test SCRNRTH_SCRM1 TRUETRUE should fail test A9_SCRNRTH_SCRM1FALSETRUE SCRNRTH_SCRM1 FALSEFALSE A9_SCRNRTH_SCRM1FALSEFALSE should fail test A9_SCRNRTH_SCRM1FALSEFALSE should fail test A9_SCRNRTH_SCRM1TRUETRUE should fail test A9_SCRNRTH_SCRM1FALSETRUE....................
I'm trying to set up conditional formatting to show when an employee is both scheduled to be working for the current date, and is trained in a particular task.
I have a spreadsheet called "Training" for all of the tasks that employees can be trained in, with the employee names in each row, and the task names at the top of each column. The intersection of an employee's row with a task's column will have an "X" if the employee is trained in the task. This is the spreadsheet that I'd like to be formatted; if the employee is trained and also scheduled to be working, I'd like to the "X" to change to a different color.
There are separate spreadsheets within the same workbook for the schedule. This is a bit more complex since the since each week of the schedule has its own spreadsheet within the workbook; each spreadsheet is named for the Saturday of the week it is for, such as "06-07". I've been able to successfully have other formulas in the workbook auto-adjust to the current week's schedule by using variations on the TODAY function (something like INDIRECT("'"&(TEXT(TODAY()-MOD(WEEKDAY(TODAY(),1),7),"mm-dd"))), but I'm not sure how to incorporate this into conditional formatting. On each schedule sheet, there is a column for each day of the week and a row for each employee. The cell for a given day will contain the employee's schedule if they are scheduled, or it will be blank if they are not scheduled. So, the conditional formatting formula would just need to check to see if the appropriate cell was blank or not.