Open Workbooks In Two Folders
Jun 24, 2009
I have a script below that opens all the workbooks in a folder based on a msgbox. The script works as is. However what I would like to do is remove the msgbox and have the script go back and forth between the folders.
Example it would open one workbook in the (Large Area)folder call my other script (Hazleton_Data_Conversion) Return Open a workbook in (Varsity) Folder Call the
my (Hazleton_Data_Conversion)and repeat the process till all the workbooks in both folders have been processed.
Like I said this script works with the msgbox I just like to change to without msgbox and to flip back and forth.
View 3 Replies
ADVERTISEMENT
May 3, 2007
I've seen a lot of code on how to pull data from workbooks in the same folder. However, I'm trying to pull the data in workbooks in various folders.
For examply, I have one folder, called "Master Files". In this folder is 12 folders, one for every month of the year. Within these folders, is one for each week, with the last day of the week being the name for the folder. In other words, it's like \Master FilesApril4-6-07data.xls
Now, I know how to get the data I need if all files are within the same folder. But how would I write a macro to run through all of those files when they're in separate folders?
View 9 Replies
View Related
Feb 5, 2010
I was searching through the internet to look for some help with regards to consolidating data from multiple workbooks from different directories into a single worksheet called Summary.
I would like to copy the entire worksheet from different workbooks in different directories into this workbook I like to call Summary. To manually do it I have to open the workbook I want to copy the worksheet from. Right click on the tab and select Move or Copy, select the sheet I want to copy and select the workbook I want to copy this sheet to. Repeat this process for all the workbooks.
The next step is to copy and paste from these sheets into a main summary sheet. The data range from these sheets are starting from row 13 onwards and they may be of different size between Column A to Column W.
For example the workbooks are coming from :
S:Area 1West.xls from worksheet Andy
S:Area 1East.xls from worksheet Bill
S:Area 1North.xls from worksheet John
S:Area 1North.xls from worksheet Albert etc...
View 9 Replies
View Related
May 19, 2008
The attached workbook has a userform which was searching the same folder where this file is located for entries in columns "A" and "B" of files named in column "I" (workbook1, workbook2 etc).
I have this placed on a sharepoint and want to move the files into specific folders (folder1/workbook1, folder2/workbook2 etc.) so I can set them as view only folders to stop unuathorised editing.
I am now getting a "Subscript out of range" error after doing a search. I can see it's a problem with the file name as it's pulling it from text in a cell but can't work out!
View 9 Replies
View Related
Sep 15, 2008
I have been given the following code to transfer data from multiple workbooks within folders and subfolders to retreive the same line of data from each of the workbooks and place them in a master workbook.
the folders are set up as follows,
there is a main folder, (a yearly folder)
within this are 12 monthly folders (named January to December)
within these are four weekly folders (named week 1 -week 4)
contained within these weekly folders are the workbooks that i wish to copy data from.
for example a1 - k1
the code i am using transfers the file names but comes up with #REF! instead of transfering the data
Here is the
View 9 Replies
View Related
Jul 10, 2012
I use the below code to close ALL open Internet Explorer pages. Im trying to adapt this to close ALL Windows Explorer Folders.
Dim Shell As Object
Dim IE As Object
Dim i As Variant
Set Shell = CreateObject("Shell.Application")
i = Shell.Windows.Count
On Error Resume Next
Do While i > 0
i = i - 1
Set IE = Shell.Windows(i)
If TypeName(IE.Document) = "HTMLDocument" Then IE.Quit
Loop
View 3 Replies
View Related
Jun 5, 2009
is it possible to type a document name in a cell,then run a code that searches a root dir and sub folders, find the existing document and open it?? for example
cell: "D20"
filename: DYAZES-001
root dir: "I:IsolationDataBaseIsolationProcedures
subfolders: DryMillA, DryMillB, Despatch, Maintenance
View 5 Replies
View Related
Oct 11, 2013
I am trying to write a macro to open a specific file, but need to search multiple folders within folders to find it.
The file name I need to open is "Escalation Adherence-Details " & Format(Date, "mm-dd-yy") & ".xlsx".
I need to drill down to the Adherence Report folder and then have the macro search through folders for each year (2012, 2013, 2014, 2015, etc) and then each month within each year (1 January, 2 February, 3 March, etc), at which point I would then find that day's file.
So far I have the following:
Code:
Sub Open_ESCL_Report()
Workbooks.Open Filename:=*****.****.****.******.comsharesPurchasingTeam XEscalationAdherence Report & "Escalation Adherence-Details " & Format(Date, "mm-dd-yy") & ".xlsx"
End Sub
Each file is stored in it's respective month folder as .....Adherence Report(Year)(Month)(File).xlsx
View 3 Replies
View Related
Aug 3, 2014
I have an Excel sheet that contains a few thousand folder paths in the first column. The first few cells in the column look similar to below.
C:UsersNameDesktopFolder Copy12010360
C:UsersNameDesktopFolder Copy12010361
C:UsersNameDesktopFolder Copy12010362
C:UsersNameDesktopFolder Copy12010363
C:UsersNameDesktopFolder Copy12010364
C:UsersNameDesktopFolder Copy12010365
I am trying to create a macro that will copy any folders that exist in any of the paths listed in the first column. The folders should be copied to the path of the open workbook containing the macro. Below is the macro I have currently, much of which was taken from information I found in this thread [URL]....
VB:
Sub wrapper3()
x = 1
Set fs = CreateObject("Scripting.FileSystemObject")
While Sheets("Air").Cells(x, 1) <> ""
v = InStrRev(Sheets("Air").Cells(x, 1), "")
dest = ActiveWorkbook.Path & Mid(Sheets("Air").Cells(x, 1), v, 99)
[Code]...
This code seems to work fine if all of the folders exist to be copied. My problem is that some do not and it is creating a "Path Not Found" error for which I need a fix. If the folder doesn't exist at the path nothing should be copied and the next path can be evaluated.
View 2 Replies
View Related
Jun 12, 2014
I need to back up files, which may be excel or MSword, by copying them from different directories, say C: to the backup directory, say X:. any vba to backup the files? I expect the vba can copy all file listed in column A.
E.g. C: est1File1.xls or C: est2File2.doc, and then pasted to the directory in column B. e.g. X:BackupFolder1 or X:BackupFolder2.
View 1 Replies
View Related
Dec 20, 2011
I have folders with different assigned folder icons based on the content in the folders.
I would like to arrange these folders in the window based on the assigned folder icons and then by alphabetical order.
How it is to be done. Can we make use of vba having the folders path list in one column of excel sheet?
View 9 Replies
View Related
Dec 3, 2008
I have built a sub that prompts the user for a folder then opens every workbook in the folder 1 at a time to get stats on the contents of each workbook. Worked like a dam until I ran into an unexpected bug. Some of the users built on open events in their workbooks. ...
Right now my routine inventories workbooks to get formula counts, cell counts, most complex formula, highest value... it does this by looping throught the sheets and the cells. If there is a way of obtaining those stats without opening the workbook I may need to rethink a lot of my work.
way to suppress the code in the target workbook I open through workbooks.open
View 9 Replies
View Related
Jul 8, 2013
macro and I think this has me on my way; however, I do not understand the code and I am having difficulty modifying it. It returns the path in cell $A1 of my workbook, but I get reference errors in $B1:$L1.
I would like for the code to start entering the values in row 2 of my current worksheet. Row 1 I want to make a header row. The first column I like having the file path. Can the path be changed to a hyperlink? I would then like for it to return the values in $AP1:$BC1 to $B1:$O1 of my current workbook.
View 4 Replies
View Related
May 21, 2014
I am attempting to create a macro that will create a new folder on the network drive Arie:quotes that will create the new folder and save the the file in the new folder. I need the name of the file and folder to be set to the master (worksheet) cell "B3". and then if possible have it be conditional that if cell "B40" on the same master (worksheet) has a value to have the value added at the end of the filename via hyphen. This workbook has numerous worksheets in it approx 15 worksheets. I am not sure if this is relevant.
As an brief example.
Cell "B3" on the master(worksheet) contains a job name I-40 bridge
So initially I would like the Folder name and file name to be I-40 Bridge
However once the Cell "B40" has been filled in with the value 54213 then I would like the file to renamed to I-40 Bridge-54213 and saved within the same folder.
I am currently working with Excel 2007 Pro edition on windows 8. I
I have found several other macro's that work with an auto save but i am unsure of how to change the directory to the network drive and show the correct file paths. This is the example of the macro I am currently working with.
Public Sub SaveAsA1()
ThisFile = Range("B3").ValueMkDir "C:NewFolder"ChDir "C:NewFolder"ActiveWorkbook.SaveAs Filename:=ThisFileEnd Sub
View 4 Replies
View Related
Aug 16, 2009
I have managed to get this far - I have put together a macro (from different threads on this site) that opens closed workbooks, copies data in one of the sheets (same sheet in each of 28 books), and pastes the data it into a master book sheet, each paste starting below the last. So that bit is working. The first bit of help I need is a line of code that will make the macro loop through a number of sub folders in a main folder. My code at the moment works as long as I specify a path that ends with the name of one subfolder, and it only loops through this subfolder. I would like the path to end at the folder that holds all the subfolders ('Workbooks' in the path below), and then add some code that tells it to apply the macro to all subfolders in this folder, so it loops through them all.
The second issue is that after the macro goes to the closed book(s), copies the data in there and pastes it into the master sheet (into columns E:FG), I then need it to go back to the workbook it just copied from, go the same sheet, to three specific cells on that sheet (FH1:FH3), copy the content, go back to the master sheet, and now repeatedly paste the content (values only and transposed) of these three cells into three cells (in columns B:D, with row number being dependent on what rows the first lot of data was copied into) next to every row it just previously pasted in for me. When it loops to the next workbook, it needs to do the same, and the three cells will have different content than the ones in the previous workbook paste.
I dont know how to define the range it needs to paste into the second time. I tried using the definition I used for the first paste (MCDrow), to tell it that it is the same rows, just different columns, but this is not working.
Here is what I have so far, which does the first part of what I need, except for needing a way to have it loop through all subfolder in the 'Workbooks' folder (at the moment it lists Barwon South West as a subfolder in that path, but I actually have multiple subfolders, not all called Barwon South (all different names) that it needs to loop through and do both the first and the second paste for. I have taken out the code I was trying to use to do the second paste, as this was not working and the code is pretty messy as it is (I sort of bumble along, being so new, and I know the code is not very clean or efficient!).
Can someone help me put in the few lines I need to loop through all my subfolders (if you give me an example I can probably extrapolate), but to get you started, three of the subfolders are Barwon South West, Eastern Region and Gippsland. And can someone help me put in the code that will do the second paste for each workbook?
Sub Click2()
Application. ScreenUpdating = True
Dim MCDrow As Long
'Dim SubFolders As String
MCDrow = ThisWorkbook.Sheets("Client Data").Range("A65536").End(xlUp).Row
Fpath = "Q:Clinical ServicesCS Statewide DatabaseWorkbooksBarwon South West" ' change to your directory
'SubFolders = True
Fname = Dir(Fpath & "*.xls")
Do While Fname <> ""
ThisWorkbook.Sheets("Client Data").Unprotect
Workbooks.Open Fpath & Fname
Worksheets("Client Data").Activate
Worksheets("Client Data").Unprotect
View 6 Replies
View Related
Mar 31, 2014
I want to open C:Projects
and for each Project in Projects, create a new folder with the actual month (e.g. "03" or "12")
Im running the Makro from a file where I'd like to put the month in a cell -> so the code refers to cell("A1") wich has value 01 and creates a folder "01" in every projectfolder in C:Projects
View 3 Replies
View Related
Feb 23, 2010
I have a macro on a workbook that when I run it, it's supposed to open a workbook, but it opens another workbook also.
How do I prevent this behavior?
View 9 Replies
View Related
Nov 14, 2006
I have a UDF in a workbook that works fine until I open another workbook which contains the same UDF. When Excel does a full recalculation it not only recalculates the currently selected workbook but also recalculates all other open workbooks. Something from the currently selected workbook appears to interfere with the other open workbooks as these other workbooks show #VALUE! in all cells that use the UDF. Is there some way to make a UDF unique only to the workbook that it resides in such that opening another workbook with the same named UDF won't interfere with it?
Function SumRangeLookup(FromCode, ToCode, Database, FromColumn, ToColumn)
Dim Code As Range
Dim MonthColumns As Integer
Dim CalcResult As Double
SumRangeLookup = 0
For Each Code In Range(Database)
On Error Goto SkipCode
If Code >= FromCode And Code <= ToCode Then
For MonthColumns = FromColumn To ToColumn
CalcResult = CalcResult + Code.Offset(0, MonthColumns)
Next MonthColumns
End If
Next Code
SumRangeLookup = CalcResult
SkipCode:
End Function
View 6 Replies
View Related
Feb 4, 2014
I have a workbook open. When I try to open a separate workbook, it opens already opened workbook (basically linking the workbooks as one). I want to have my workbooks on two separate screens this is preventing that. How to unlink these workbooks.
View 1 Replies
View Related
Nov 14, 2008
Having some issues moving between 2 open workbooks. I just want to add a new workbook, select the first workbook and active sheet then move that sheet to the new workbook that was just made and lastly save the new workbook with the name of the sheet that was just moved. I have some code but it is not working correctly.
View 5 Replies
View Related
Jan 27, 2009
Sub vocab6()
Dim fname As String
fname = "c:Documents and Settings
obertDesktopvocab.xlsx"
Workbooks.Open Filename:=fname
Workbooks(fname).Worksheets("tangible nouns").Range("A1").Value = 9
End Sub
I just want to open a workbook saved on my desktop (from a different workbook), and insert 9 into the first sheet (which is named tangible nouns).
View 9 Replies
View Related
Dec 2, 2009
I am using a macro to open .txts in excel in seperate workbooks
I look for a macro to save all open woorksbooks in .xls
View 12 Replies
View Related
Dec 28, 2009
I have an excel sheet that has a userform on, when this is open my users are required to cross reference with another excel sheet they have just typed up to make sure they enter the right information into the userform. The only problem i have is, when the userform is open my users cant access any other excel workbooks.
View 2 Replies
View Related
Oct 17, 2013
I have a macro that opens all workbooks in a folder and searches for a few terms returning the appropriate rows, my problem is that someone has decided to protect some of the sheets so when the files are opened you get the password box popup. I have added the (filename, readonly) segment however this has not solved the issue, the macro displays an error stating a workbook is open.
Is there any way to resolve this without unprotecting the sheets?
View 2 Replies
View Related
Jul 19, 2007
I am trying to use Workbooks.Open() function in a function. The function is not working as desired (it does not return workbook object), but when i use same piece of code in sub(macro), it works fine. I am not sure if I cant use this API inside function. I am using function because I would like to call this inside cell and that should return some value.
View 9 Replies
View Related
Jun 11, 2009
I would like to run a macro on all open workbooks except the workbook where the macro is saved. I thought I could just do the following but it does not run my macro on all the work books:
Sub apply()
For Each wb In Workbooks
If wbk.Name ThisWorkbook.Name Then
Debug.Print
nominee_name
End If
Next wb
End Sub
View 9 Replies
View Related
Aug 23, 2007
I have written a VBA code to make a pivot table from data in another workbook,A, and transfer it to workbook B. I however dont want to restrict this code to workbook A only. This is because usually workbook A will have varying names everytime it is sent. I want to be able to get data from any other workbook that is open at the same time as work book B. What code can I use to select/activate another unspecified open workbook and get data from there?
View 3 Replies
View Related
Feb 25, 2008
I made an Excel based program that uses multiple workbooks with two main workbooks (“Master List” and “Products”) that all the others pull information from. I run into a problem when a user clicks the close X in the upper right hand corner and the entire application closes. I found some code that will let me close all the workbooks but one (the code is put in the “Products” workbook in the BeforeClose event).
For Each wb In Workbooks
If Not wb Is ThisWorkbook Then
wb.Close SaveChanges:=True
End If
Next wb
Is there a way to modify the code so it will close all the workbooks but the two main ones if someone clicks the close X button in the upper right hand corner?
View 3 Replies
View Related
Mar 15, 2008
I have a folder containing a number of worksheets, these worksheets are of 2 types, a customer submitted workbook and, associated with each of these, anything between 2 and 7 locally created workbooks. I have a macro which opens a customer workbook and all the relevant local workbooks. My problem is that I need to declare a variable for each of the workbooks in the form
Dim N As Integer, WbN As workbook,Wb1 As workbook
If activeworkbook. name Like *ALL.xls Then
Set wb1 = activeworkbook
Else
Set WbN = activeworkbook
N=N+1
End If
This code is contained within a Found files loop
View 2 Replies
View Related
Mar 29, 2013
I am trying to cycle ALL open workbooks so that I can choose the file to manipulate in subsequent code this is the code that I am utilizing furhter below
this is my code
VB:
For Each wb In Workbooks
If MsgBox("Do you want to do access this Workbook for the Update " & Chr(10) & Chr(10) & wb.Name, vbYesNo) = vbYes Then
wb.Activate
VI_wb = wb.Name
I = True
End If
Next wb
But for some reason it only loops through .xls and xlm workbooks BUT not .xlsx
is there a way that I can loop through any and all open workbooks.
The reason I do this is because my update are based on many numerous excel workbooks with differnet extentions, and naming conventions and many of the come via email, I cannot use the eact naming convention
View 1 Replies
View Related
