In my spreadsheet cell g1 is a name and cells g3:g6 contain data for that name.
I have a macro that exports the data in g3:g6 to another workbook and then deletes it.
What I need is a macro that when I try to change g1, gives me a warning if there is unexported data in cells g3:g6 (ie the sum of them is greater than zero) and gives the option of either continuing or stopping (presumably using a YesNo box).
Is there any way to have a cell change its colour depending on whether a condition is met. E.G., can i have it as green if the result is a plus number and red if its a negative?
View 2 Replies View RelatedI have a few buttons on my page that I would like to change colors depending on the value in cell AI1. Right now this is the code I have:
[Code] .......
What I would like is to add formatting for "rounded rectangle 4" as well. if the cell = 1, number 4 changes color, if the cell = 2 both change color, and if the cell =3 then only 5 changes color.
I want to be able to do the following: I have data in column a and I want the text to change to strikethrough in, for instance, cell a1 when data is entered in b1.
I have an if statement which shows either GP% or average revenue per product. The problem is that GP% needs to be in a percentage format and revenue per product needs to be in number format. 500 is now shown as 50000% or 50% will be shown as 0.5 for example. Is there anyway on changing the format of a cell based on the number?
View 1 Replies View RelatedThe spreadsheet attached is a timesheet I use. The last column on the sheet (IV) keeps a running total of time spent on each project. I need a way that i can find out how much time was spent on projects in specific timeframes (eg 01/01/09 - 07/01/01, or 01/01/09 - 31/01/09). my initial thought is perhaps i can have a "from" cell and a "to" cell to input the dates i require and it will total the relevant cells in the rows below.
NOTE! This workbook uses VBA to auto hide any column which are dates previous to today's date so you may need to unhide them to view times logged.
How to a change a cell colour to say red in B6 if cell b12 = 1 and if e6 = 1 to change to green. I thought I might be able to use conditional formatiing but no. I had set the spread sheet to do a cell just for a condition representing a sum from another worksheet and it was working fine but i have to incorporate the two together and am stock.
I have attached a spread sheet.
I have a spreadsheet with names and start / finish dates columns down the left hand side then a row of week commencing dates along the top.
for each name row I would like to change teh fill colour of a cell to green to represent the week in which they started and to red for the week in which they finished. I therefore need to cross reference the start and finish dates for each name with the relevant week commencing dates at the top. Somehow! I presume there is some kind of vlookup type formula that I need to use in conditional formatting, but I am not sure what.
i need to change the colour of 4 cells depending on the one cell.
i have found some vba codes on the net but they are all based on numbers and i need it on text.
so if a1 ="alert" make A1 to A4 red
if a1="passed" make a1 to a4 green... and so on
i cant used conitional formatting as i need more than 3 colours
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Is it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
View 3 Replies View RelatedMy colleagues are working on multiple projects at once. The projects got different priority, so I'm looking for a formula that change the cell color if a person is working on it, depending on the project's priority.
For example if John is working on project: East(pri.1), South(pri.2) and West(pri.3). On East he got 5 remaining hours (cell E8). Then i would like that cell to turn red. For South green and West red.
I would like to conditional format an Object depending on the variance between 2 weeks.
If the value is > than 0% the arrow is Green and points upwards.
If the value is = to 0% the arrow is Yellow and points at at 90 degree to the left.
If the value is < than 0% the arrow is Red and points downwards.
Attached is a sample : rrow Conditional Format.xlsm‎
I want to change the colour of a cell depending on its value, when compared to another row of data identiified by a value in another cell. To try an clarify:
b3 = 1 b5=4 Because b3 = 1 then compare cell b5 with the row g1 as b3=g1 then depending on its postion set a colour
g1= 1 g2:g5 = 2,3,4,5,6
h2= 2 h2:h5 = 7,8,9,10
I'm using Excel 2010. Is there any solution which cover requirements given below.
1) I've converted a range in to table format (using Format as Table)
2) Need to Prevent pasting on data validation cell.
3) Need to Prevent change in cell format after pasting data (other than data validation cells as mentioned above) from same workbook or other workbook
4) Need to insert row in the table as per requirement.
As seen from my attached file,
The colour of the percentage cell changes according to its percentage. I would like the S/N cells to have the same colour as the total percentage cells automatically. (Even when the percentage updates)
Secondly, for the cells under "Target", if the target dates are 1 day before today(the current date on a particular day) and the actual date is not filled, the cell fill will turn amber.
If today is on or after the target date and the actual date is not filled, the cell will turn red.
However, if the actual date is filled, the target date cell will be filled green, overwriting the above two condition.
FormattingHelpExample.xls‎
Macro Based on an input cell’s (e.g. B12) setting of “yes” or “no”, format several other cells (e.g. B20:G20, B23:F23, C26:J26) as follows: keep the existing yellow shading if input cell is “yes”, change to grey shading if input cell is “no”. I would like this macro to run automatically whenever the input cell value is changed.
View 2 Replies View RelatedHow do I change the color of a cell as the result of a logical function?
For example: =IF(A1<A2,A1 is yellow, A2 is yellow).
I am trying to make the colour of cell change depending on the result in an adjacent cell and have found and adapted the following:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("x4:x202")) Is Nothing Then
Select Case Target
Case 11
icolor = 43
Case 21
icolor = 43
Case 31
icolor = 27
Case 41
icolor = 27................
I am trying to populate a table (a7:c27) in the attached sheet with data.
First, I must enter a number 1-16, which uses index function to return either "series" or "base"
If it is base, i want the number in the corresponding table filtered down - i.e. if 1 originally picked then h7 is (40) is entered into each month as base = constant.
If the result is series, then the data in i7:z7 is entered into the the 18 month table.
I have used the below code to insert a new row when the value in coulmn A change. I now need to evolve it so that the new row will contain a specific value depending on the changing value:
Before:
Column A Column B
one test
one test
two test
two test
three test
three test
After:
Column A Column B
one test
one test
Coz two............................
I've just started working on an FTE calculator and wish to populate a 12 month calendar with FTE depending on the start and finshed dates.
FTE Calculator non nursing.xlsx
I've attached the file. In Column D the user would select the month the staff start and in the Column E the month the staff will finish. I would like the fte that is calculated in Column Z then to populate in the 12 columns AB:AM (Jul to Jun) with corresponding month start and finish.
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedI have a workbook with a template worksheet. I can generate new worksheets using the Template, and create hyperlink to the new worksheet (Let's call it "New"). However, if an user changes the name of the worksheet from "New" to "SomethingElse", then the hyperlink breaks. How do I get the hyperlink to be automatically updated to "SomethingElse"?
View 4 Replies View RelatedWhen I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
Is there a way to prevent the Workbook_SheetChange event macro from triggering when I run Excel's Solver?
The solver goes through 100 or so iterations changing multiple cells each of which seemed to trigger the Workbook_SheetChange event. If there was a Solver Run event, I could turn off application events, but as far as I know such an event does not exist.
I want change color Font depending in my if then else.
I have workbook with several sheets, but i need change colorfont Is that validation is true.
The number are in Sheets("PSDATA").Range("AA")
Private Sub color() .....
when I execute this code on the selected cells, it completely ignores my selection, and makes the entire worksheet black.
Sub ColorCells()
Dim cell As Range
For Each cell In Selection
If cell.Value = "U" Then
cells.Interior.Color = 3
I have a spreadsheet that is very large and formated a certain way. I want to make sure that a user cant put the cursor in the lower left corner and copy cells by dragging, copy & paste, or do anything other than input data and be able to highleght text and reinput data in case they mistyped or misspelled the data.
ex: user clicks on cell E33 and types in '1234568' and then move to next cell. The user can click back on E33 and can correct by retyping. That is all the user is allowed.
The cells in question are also in ranges if this helps. EX: 'E33:AJ67'
I'd like the users to be able to change some detail in a couple of places and have it updated throughout the spreadsheet. Basically, the user can change the line name in any of the input sheets and the code changes the sheet name, and searches for the reference to the old name in the overview sheet and changes it accordingly.
The problem I have at the moment is that I would also like the user to be able to change the line name from the overview sheet too... I am having trouble thinking how to have similar code in the "Overview" sheets Worksheet_Change event without getting into a big constant loop... e.g. if the line name is changed via code on the individual input sheets won't that then trigger the first code, which will trigger the second etc. etc. I have the following code in the ThisWorkbook section:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim sName As String
Dim sOldName As String
Application. ScreenUpdating = False
sOldName = ActiveSheet.Name
If Target.Address <> "$B$1" Then Exit Sub
sName = ActiveSheet.Range("B1")
On Error Goto ErrorHandler
ActiveSheet.Name = sName
On Error Goto 0
Sheet8.Select 'this is the overview sheet
Cells. Find(What:=sOldName, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate........................