Every time I copy and paste cells in a specific workbook it changes the reference style to R1C1. Setting it back in the options, saving the document, closing Excel then reopening brings it back as A1 referencing but copy and paste will again return it to R1C1.
I've checked for VB code and there's nothing there either.
I have tried to reset the cell reference style back to A1 from R1C1 (Tools-->Options-->General tab-->uncheck R1C1 reference style), but when I close Excel and reopen it, the reference style changes back to R1C1 style. When I make the change I described above using the Options feature, it changes it for the current file and saves it with the file. When creating a new file in the same session, it keeps the A1 reference style, but when I close Excel and reopen it, it returns to the R1C1 style. Any ideas about how to return to the default A1 reference style for the next Excel session?
Currently, I have switched my referencing style back to the default mode; however, every time I restart Excel, it switches me back to the R1C1 Reference Style. Is there a method to prevent this, instead of unchecking the option every time?
View 8 Replies View RelatedI need the column numbers to start with 0 instead of 1, I'm using the R1C1 Reference Style. In other words, I want the first cell to be "R1C0" (or "R0C0") not "R1C1".
View 3 Replies View RelatedWhen I first started using excell I was relatively good at it, however a few changes were made. The main one being for excell 2002 was the collumns were not by letter. A minor problem that I managed to get past. However the next was a function issue. Before I remembered a way to total rows with a simple function like =b3*c3, which worked for the first one. Then, from that point, I could copy that formula and paste it to all of the cells in the collum in which the forumula changed for individual cells to =b4*c4, =b5*c5, etc.
My questions are simple. Is there a way that I can do this on Excell 2002 without having to do it on a cell by cell basis, and is there a way to change collumns back to letters.
I've attached the spreadsheet in which I want to figure this out on. The goal, is to total price and quantities sold into the totals section without doing it on a cell by cell basis.
Is there any way to modify the 1st style under the Light category? I like it because it's the most simple but it won't allow me to Modify or Duplicate. Is there a work around to duplicating/copying it? I've tried manually creating a new style but I can't get it to get the lines fills correctly.
View 2 Replies View Related=IF(CEILING(B9/0.5,1)>40,MAX(CEILING(B9/0.55,1),40),MAX(CEILING(B9/0.5,1),36))-0.01
Edit B9 to the R1C1 style of cell reference, how to do that?
I get an error at the line in red, I'm sure I messed up the R1C1 Part. The first formula will be put in HZ5:HZ100 Those cells need to reference another sheet in the workbook call Varsity A3:A98. The Second formula will be IA5:IA100 Will ref Varsity B3:B98
So whenever someone enters a name in the varsity sheet the name will appear in the other sheet. This is a master workbook That will be copied many times that is why I am putting the formula in after I create the copy because the links would look at the original Varsity sheet otherwise then the user get the update links messages.
I am trying to insert a formula into a VBA Code but I get an error msg.
The formula is;
It's probably O so simple but: Using a variable in R1C1, here's the attempt:
-----------------------------
Dim RS_Period As Double
-----------------------------
RS_Period = Sheets("Sheet1").Range("B17") - 1
-----------------------------
Range("E2:E" & LastRow).FormulaR1C1 = "=(RC[-2]-OFFSET(RC[-2],9,0))/OFFSET(RC[-2],9,0)"
-----------------------------
I lieu of the "9" I need to use the "RS_Period" which is an offset value.
I need to know how to use a variable in an R1C1 statement. The statement is as follows:
Set rng = Sheet1.Range("A2:QFinalRowII").CurrentRegion
Ideally the statement would read something like,
Set rng = Sheet1.Range("A2:Q10").CurrentRegion
How would I use a variable name like "FinalRowII" instead of a number?
I want to subtract one date from another to find out the total waiting time, and repeat this action for multiple rows.
I'm trying to use an R1C1 formula within all of this.
Dim TotalTimes As Long
Dim iTime As Integer
TotalTimes = Cells(Rows.Count, 4).End(xlUp).Row
For iTime = 1 To TotalTimes
Cells.Find("Waiting Time").Offset(iTime, 0).FormulaR1C1 = [R[iTime]C[-1]-R[iTime]C[-2]]
I'm trying to figure out how many Widget As are in Order 0001, for example.
Order # Product
0001 Widget B
0001 Widget A
0001 Widget A
0001 Widget C
0001 Widget A
0002 etc.
I would think that I should use a sum(R1C1:R1C1) format to figure this out, but I might be making this harder than necessary.
In Cell O4 I have a number 35 that number never changes.
Now in Cell C40 I have another number that is a formula. the formula gives me a total of how many points are left.
In C42 I want the total to either been 35 or subtract the negative number from 35, the points can never go over 35.
Any number that is a positive or 0 will equal 35, if a negative number subtract from 35.
I'm trying to create a border for a range using R1C1 and get an error.
VB: Sheet11.Range(Cells(y, 1), Cells(y, 5)).BorderAround Weight:=xlThin
If I do not use R1C1 it works...
VB: Sheet11.Range("A18:E18").BorderAround Weight:=xlThin
Everything else in my macro is using R1C1 format for ease of automation. However, I cannot get this to resolve. I am setting the source data for a line chart.
However, if I use A1 format it works just fine.
I am using R1C1 for automation purposes. A1 format will not easily work. I have the interpolated statement in there because the range contains some empty cells. I want excel to fill the line in the chart using interpolation. All the data in the columns(N through R or 14 through 18 in R1C1 format) is contiguous. I have not tried Union, but it seems I should just use this range like I do in the A1 format.
I am writing a macro that populates some columns from other worksheets, and populates other columns with formulas. One of these formulas is a text string that includes a three digit number, with leading zeros if needed. The following formula works perfectly when typed directly into the cells:
=IF(AND(RC[15]<>"",RC[4]<>""),CONCATENATE(RC[14],"-",IF(RC[15]<10,"00",IF(10<RC[15]<100,"0",)),RC[15]),IF(AND(RC[14]="",RC[4]<>""),R[-1]C,""))
But this formula triggers a error message "Compile error: Expected: end of statement" when inserted in my sub. The "00" is highlited when the error message appears.
My current dataset goes to row 256, when I use the Macro Recorder it produces the following "static" code.
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"claim_export!R1C1:R256C23", Version:=xlPivotTableVersion12). _
CreatePivotTable TableDestination:="Sheet5!R3C1", TableName:="PivotTable1" _
, DefaultVersion:=xlPivotTableVersion12
QUESTION/PROBLEM:
Each month the amount of rows could be different (columns should be the same)... I have tried (3) different ways to replace the 256 with my variable name called "numbers"
SourceData:="claim_export!R1C1:R " & numbers & "C23" OR
SourceData:="claim_export!R1C1:R[" & numbers & "]C[23]" OR
SourceData:="claim_export!R1C1:R[" & numbers & "]C23
They all produce the same resulting error:
Run-time error '5': Invalid procedure call or argument.
Note* I am sure my variable is working, because when I "step into" (F8) my code and hover over my variable I can see it showing the number I expect.
know if I can use a wildcard on R1C1 notation for my "lookup value" in my Vlookup, so that the Vlookup searches for a not exact match, but on the whole contents of the cell, not just the first several letters? I am using VBA, and the vlookup is in each cell of a for next loop, so I cannot use an actual cell reference which is where I've usually seen, and used wildcards. I've tried changing the Vlookup to have the lookup value be "Cells(n,2)" instead of "RC[-2]" to no avail. I need to make the vlookup evaluate all the words in cell "RC[-2]" prior to returning the value I specified, because otherwise it returns the wrong value even though I sorted my lookup table Column A A to Z.
Start Date
End Date
Event ID
"Trans-Pacific Melodies" : an East-meets-West concert presented by Carolina International Orchestra and the China National Orchestra
10/06/13
10/06/13
22297
[code]....
I am trying to figure out how to use a variable as a row number for use in a range name and/or a pivot table range. Right now I have a range of R571C17, but the row number will change with each use of the pivot table formation macro.
View 3 Replies View RelatedDoes anyone know if it's possible to use R1C1 style references in conditional formatting formulas?
Eg., =R[-1]C > 1
I tried the above and I keep getting an error.
I am using follwoing vb code to enter formula to sum a range. However it is giving sum of different range.
Cells(Row, Column).FormulaR1C1 = "=SUM(R[" & a & "]C[" & b & "]:R[" & x & "]C[" & y & "])"
Where a, b , x and y are variables containg starting row, starting column, last row and last column value like a=19; b=3; x=24 and y=3. When i check the formula in that cell, it appears as Sum(F25:F30)
I have Excel 2008 for Mac (vers 12.0). On a basic spreadsheet, the first column is for date which I have formatted so I can type in 15/8/9 and it appears as 15-Aug-09.
However, each time I open Excel after having Quit it, I have to reformat the cells in this column again as they revert to converting my date input with something like 39,123.
My other columns are formatted to currency and are always okay.
I set the scroll area on a worksheet and saved the file. The next time I open the worksheet the scroll area is no longer set.
View 7 Replies View Related1. I have a userform I created that has a text box that pulls it's data from one of the spreadsheets tab. The userform also has 5 buttons I shall call Tab1, Tab2, Tab3, Done, Cancel.
2. The first thing a user will do is make a selection from the text box.
3. The User will then select one of the "Tab" buttons.
Below is my code. What happens is that no matter what button I click (Tab1, Tab2, Tab3) it ends up on Tab3 because it is the last transfersheet line of the done_click() sub routine. How do I get it to stay on the Tab I select?
+++++
Private Sub cancel_Click()
Unload UserForm
End Sub
+++++
Private Sub done_Click()
Dim transferworksheet As Worksheet
Set transferworksheet = Worksheets("Tab1")
transferworksheet.Cells(5, 7).Value = Me.ListBox1.Value
[Code] ..........
I have a spreadsheet that tracks employee stats. Most of these stats are amounts of TIME. These times are being pasted from another source and the problem I'm having is that as soon as excel sees "1:02:03" it puts it in TIME format. The problem I have with that is later on I need it in text format because a lot of the other times are in text already. (the program the info is coming from will use ":59:59" and not have a 0, so I have compensated for that later) So how can I paste 1:01:01 and not have it saved as TIME? I cant CONVERT it to text, I need it to be text from the start.
View 9 Replies View RelatedI'm trying to select a range of cells using the R1C1 notation. But I'm making an error in the syntax. I know it's really simple, I just don't know what's wrong.
View 2 Replies View RelatedI receive an run-time error message 1004 "autofill method of range class failed" in the following setting, in the 2nd line.
In this instance, I want to copy 1 cell from the cell 2 columns before.
Code:
Range("M3").FormulaR1C1 = "=RC[-2]"
Range("M3").AutoFill Destination:=Range("M3"), Type:=xlFillDefault
In Spreadsheet A Cell H8 is entered as Item Description.
In Spreadsheet B Cell H8 is also entered as Item Description, but if the Item Description in Spreadsheet A has been changed, I need Spreadsheet B to reflect that change, if not it should stay as Item Description.
I have a formula:
=INDEX('Part Info'!E1:E300,MATCH(1,('Part Info'!A1:A300=A1)*('Part Info'!B1:B300=B1),0))
I want the E1:E300 to stay E1:E300 when I drag it down but I want the A1 for example to change to A2, A3, A4 and etc.