I am trying to figure out how to use a variable as a row number for use in a range name and/or a pivot table range. Right now I have a range of R571C17, but the row number will change with each use of the pivot table formation macro.
Each month the amount of rows could be different (columns should be the same)... I have tried (3) different ways to replace the 256 with my variable name called "numbers"
SourceData:="claim_export!R1C1:R " & numbers & "C23" OR SourceData:="claim_export!R1C1:R[" & numbers & "]C[23]" OR SourceData:="claim_export!R1C1:R[" & numbers & "]C23
They all produce the same resulting error:
Run-time error '5': Invalid procedure call or argument.
Note* I am sure my variable is working, because when I "step into" (F8) my code and hover over my variable I can see it showing the number I expect.
The code below is for a macro that allows the user to create a list of contacts. The column containing the names of these contacts are then referenced by a userform (code not present) by way of a Named Range. I want to update the named range whenever the user adds another contact so this new contact shows up in the user form.
I am currently referencing the range containing the names using R1C1 style, but I cannot get the variable aspect to work correctly.
I am writing a macro that populates some columns from other worksheets, and populates other columns with formulas. One of these formulas is a text string that includes a three digit number, with leading zeros if needed. The following formula works perfectly when typed directly into the cells:
But this formula triggers a error message "Compile error: Expected: end of statement" when inserted in my sub. The "00" is highlited when the error message appears.
I am using follwoing vb code to enter formula to sum a range. However it is giving sum of different range.
Cells(Row, Column).FormulaR1C1 = "=SUM(R[" & a & "]C[" & b & "]:R[" & x & "]C[" & y & "])"
Where a, b , x and y are variables containg starting row, starting column, last row and last column value like a=19; b=3; x=24 and y=3. When i check the formula in that cell, it appears as Sum(F25:F30)
When I first started using excell I was relatively good at it, however a few changes were made. The main one being for excell 2002 was the collumns were not by letter. A minor problem that I managed to get past. However the next was a function issue. Before I remembered a way to total rows with a simple function like =b3*c3, which worked for the first one. Then, from that point, I could copy that formula and paste it to all of the cells in the collum in which the forumula changed for individual cells to =b4*c4, =b5*c5, etc.
My questions are simple. Is there a way that I can do this on Excell 2002 without having to do it on a cell by cell basis, and is there a way to change collumns back to letters.
I've attached the spreadsheet in which I want to figure this out on. The goal, is to total price and quantities sold into the totals section without doing it on a cell by cell basis.
Hello I'm looking for some clarification about how to use "= SUM(RC:RC)". I don't understand what the RC:RC represents. I thought that this was the directions for where to "position" the formula, but I think I'm missing something.
I was able to include the correct cells that I need summarized, but the answer is not right; it's zero.
I have tried to reset the cell reference style back to A1 from R1C1 (Tools-->Options-->General tab-->uncheck R1C1 reference style), but when I close Excel and reopen it, the reference style changes back to R1C1 style. When I make the change I described above using the Options feature, it changes it for the current file and saves it with the file. When creating a new file in the same session, it keeps the A1 reference style, but when I close Excel and reopen it, it returns to the R1C1 style. Any ideas about how to return to the default A1 reference style for the next Excel session?
I get an error at the line in red, I'm sure I messed up the R1C1 Part. The first formula will be put in HZ5:HZ100 Those cells need to reference another sheet in the workbook call Varsity A3:A98. The Second formula will be IA5:IA100 Will ref Varsity B3:B98
So whenever someone enters a name in the varsity sheet the name will appear in the other sheet. This is a master workbook That will be copied many times that is why I am putting the formula in after I create the copy because the links would look at the original Varsity sheet otherwise then the user get the update links messages.
Everything else in my macro is using R1C1 format for ease of automation. However, I cannot get this to resolve. I am setting the source data for a line chart.
However, if I use A1 format it works just fine.
I am using R1C1 for automation purposes. A1 format will not easily work. I have the interpolated statement in there because the range contains some empty cells. I want excel to fill the line in the chart using interpolation. All the data in the columns(N through R or 14 through 18 in R1C1 format) is contiguous. I have not tried Union, but it seems I should just use this range like I do in the A1 format.
Every time I copy and paste cells in a specific workbook it changes the reference style to R1C1. Setting it back in the options, saving the document, closing Excel then reopening brings it back as A1 referencing but copy and paste will again return it to R1C1.
I've checked for VB code and there's nothing there either.
know if I can use a wildcard on R1C1 notation for my "lookup value" in my Vlookup, so that the Vlookup searches for a not exact match, but on the whole contents of the cell, not just the first several letters? I am using VBA, and the vlookup is in each cell of a for next loop, so I cannot use an actual cell reference which is where I've usually seen, and used wildcards. I've tried changing the Vlookup to have the lookup value be "Cells(n,2)" instead of "RC[-2]" to no avail. I need to make the vlookup evaluate all the words in cell "RC[-2]" prior to returning the value I specified, because otherwise it returns the wrong value even though I sorted my lookup table Column A A to Z.
Start Date End Date Event ID "Trans-Pacific Melodies" : an East-meets-West concert presented by Carolina International Orchestra and the China National Orchestra 10/06/13 10/06/13 22297
Currently, I have switched my referencing style back to the default mode; however, every time I restart Excel, it switches me back to the R1C1 Reference Style. Is there a method to prevent this, instead of unchecking the option every time?
I need the column numbers to start with 0 instead of 1, I'm using the R1C1 Reference Style. In other words, I want the first cell to be "R1C0" (or "R0C0") not "R1C1".
I'm trying to select a range of cells using the R1C1 notation. But I'm making an error in the syntax. I know it's really simple, I just don't know what's wrong.
I'm trying to enter the = sum formula using vba with one of the ranges in the formula being a variable. Can not seem to get the following to enter the formula correctly.
I have a data set which is structured such that there are variable numbers of products (column A) from 1 - 48 and these repeat multiple times for each "Name" held in column B. I have attached an example of this which uses a data set with 7 entries reapeating 7 times.
I need excel to insert 2 formula for me multiple times which needs to varry according as follows
1. Calculate the average value of data in Column C - G for n cells starting at a specific cell (C2), I have inserted an example of this and highlighted it in yellow. This then needs to repeat down column C several times, the number of times this will repeat depends upon the number of different names held in column B. But I have this calculated already and stored in a cell im my main document.
2. Calculate the variance of each value in the x cells above from the average calculated in point 1 above. I have highlighted this also in yellow.
I would like to do the following in a copied down row where n5 is a cell that contains a number that is added to a row number in order for the range to maintain n5 rows when copied down.
I'm using Excel 2000/2002. I have a workbook with 12 sheets named Jan, Feb, etc. I want to add a new sheet (Report) with formulas in various cells to get data from a cell in a particular sheet.
For instance, in a cell of the new sheet is: =Jan!D64. I want the user to be able to select a month from a drop down list and for the formula to change sheets depending on the month selected. The formula should be: =(sheet name!)D64. I tried playing with INDIRECT, but maybe couldn't get the syntax right. I can't use macros, the Excel is on a server and they are not permitted. The end user is less knowledgeable in Excel than me.
The lookup is for 00.2014, but this is to fixed. Want to use the same code next year to. So I already defined the variable 'jaar' which the user can choose with a validation. (and next year they set it to 2015).
I thought this code would do it but no luck:
[Code] ....
So what would be the correct way? Been shifting with the " " but its only make more and more mess.