I have a range object representing a data set, and I want to return only the first row of data from the range. The range starts at cell A2:
21 22 23 24 25
31 32 33 34 35
41 42 43 44 45
I.e. the value 21 is the data in cell A2 (row 2, column 1) and so forth.
'Given that WS1 is a worksheet object representing Sheet 1
'Given that WS2 is a worksheet object representing Sheet 2
I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
I have tried to go around the long way to achieve this but came up with pages of pointless code .... I know there is a better way I just dont know enough about VB to do it myself ... And I know this is EASY for many :-)
--------
Cell ranges h11 to as11 are a totals row.
If the total is 0, colorindex is set to vbpatternnone, if >= 1, then colorindex is set to vbpatterngray. Easy right ? I just dont kn ow how to do FROM/IF/DO range loops...
--------
Details:
The code in worksheet_SelectionChange will contain the following:
1: From range h11 to as11, variable1 = application.interior.colorindex of the cell.
2: Check if the cell is >=1 or <=0 ....
3: If >=1 then set application.interior.colorindex = vbpatterngray. Go to #5.
' (This inserts a pattern over the original color of the cell)
4: If <=0 then set application.interior.colorindex = vbpatternNONE
ALSO set application.interior.colorindex = variable1
' (This clears the cell pattern and returns it to original color)
5. Repeat steps to clear cell pattern and restore color / or insert pattern for all cells from range H11:AS11
6. End sub
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedI'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies View RelatedI have a module that contains the lines below:
Dim myRng as Range
set myRng = Range("B1:B100").Find(what:= "Symbol")
I have run this module frequently and successfully over the past several months, during which time Column B has been hidden. When I tried to run it today I got a Run-time error 91: Object variable or with block variable not set. I checked to see that "Symbol" was present in the stated range (it was), and noted that when I went to debug the Run-time error, myRng was 'Nothing'.
Now I find that if I unhide the column before the set myRng statement, the code runs without a hitch.
My question is: Is there a known restriction on the Range.Find Method that prevents its use on a hidden range?
I am trying to sum the cells in a column from a variable starting row to a variable ending row. My problem is that I can not figure out how to use the "Range" method with variable values.
Below is what my code would look like if I was summing from I2 to I6 (hard coded)
This error occurs after I wanted to use the Auto-filter function for every row. I used to separate the merged cells that used to be into single cells. After that the compiler reports error. Here is the code:
View 2 Replies View RelatedLet CopyRange = 'A' & Roll
Range(CopyRange).Select
Roll is dimensioned as Long, and is a counter for line numbers. Is this legal? I'm getting:
Method 'range' of object '_Global' failed.
i just figured out that when you change sheets too often in VBA and get an "Activate Method Of Range Class Failed" or a "Select Method Of Range Class Failed" etc, simply retype the sheets command before it
for example :
Sheets("Work1").Select
Range("A1:D50").Select
OR
Sheets(Work1").Range("A1:D50").Select
this code in VBA, if used too often or the mentioned sheet is not the currently selected sheet in a Sub, will cause errors, and to correct this, simply type
Sheets("Work1").Select
Sheets("Work1").Range("A1:D50").Select
this makes sure that the sheet is selected before running any other range/sheet type commands.
I have modified this code in the past and used it in at least 4 different appications. However this time my lack of VBA knowledge has got the best of me. I keep getting the error message mentioned in my title and the debug highlight the following:
With Range("A:O" & lngS1LastRow)
Here is my code.
Sub TextConvert()
Dim lngS1LastRow As Long
Dim lngS2LastRow As Long
Dim FilteredRange As Range
Dim rng As Range
I have a while loop in which I'm updated information in 2 separate worksheets. I'm using the With-block statements separately to update each, but after the 30th iteration (and it's always on the 30th), the VBA code halts and get the "method 'value' of object 'range' failed" error message pointing to a line with the code as follows:
With Sheet1
.Cells(lngRow, 9).Value = intMonths
End With
where "intMonths" is an integer variable which I'm populated properly, and "lngRow" a long variable. When I debug both variables have proper data in them, and I have no idea why this is bombing.
Is it possible to use the Find method using a DATE RANGE? For instance, If I have two input boxes; One, a beginning date and the other an Ending Date.
Is it possible to use Find to search for all dates that are >= strBegDate and <=strEndDate?
I was offered a tip to use Range.Value rather than copying. My syntax fails. I desire to have C2:C equal in D2:D and E2:E.
error: Method "Range" of object'_Worksheet' failed
Range("C2:C" & LRow).Value = Range("D2:E").Value
what i need is this code to find the data only in N11:N22 i do not want the data to be search anywhere esle ...
View 9 Replies View RelatedI keep getting a Method Range of object_Global Failed error in the following marked like of code.
Private Sub CommandButton1_Click()
VB:
Dim GetData As Variant
Dim Criteria1 As String
Dim Criteria2 As String
Dim Criteria3 As String
[Code]....
I want to search the selected range for a variable value (calculated previously in the sub) and if it finds the value I want the sub to do some things. If it's not in the range I want it do something else.
Here is the relevant section for what I have:
[Code] ......
This works and cuts the value I'm looking for if it finds a value in the range. The problem is it's not in the range I don't know how to tell it to follow other instructions. I tried the "iserror" with an in statement, but it said the range was not set. Intellisense isn't working and I don't really know how to use the .find method ...
I have created a spreadsheet that is 38mb and needed to size it down. I recorded the following macro to do this. This essentialy jut copies the top line of the relevant columns on each page and then copies the formulas down, calculates, and then pastes just the values of these calculations, thereby reducing the sheet to a third of its size. The macro works if I run it from the macro option on the toolbar, but when I assign it to a command button I keep getting ' select method
View 13 Replies View RelatedI can't seem to figure out why this keeps giving me that error...
I've checked the row and column values inside and they seem to be ok. blank_ee() is an array of strings.
For some reason, it seems that this following line returns the value its supposed to be searching for instead of the range where it finds the value.
View 5 Replies View RelatedI try to copy some cells from one workbook to another but keep getting the error message "paste method o range class failed."
I tried different ways to paste, such as
range("D157").PasteSpecial Paste:=xlPasteValues
or
range("D157","D330).PasteSpecial Paste:=xlPasteValues
and got the same result.
-----------------------------------------------------------
If Dir(sourcePath & Format(voucherDate - 1, "dd/mm/yyyy") & ".xlsm") "" Then
Workbooks.Open Filename:=sourcePath & Format(voucherDate-1, "dd/mm/yyyy") & ".xlsm"
Range("H157", "H330").Copy
ActiveWorkbook.Close
Cells(157, 4).PasteSpecial Paste:=xlPasteValues
Using VBA, I randomly input values in A1: C1 and it will show total sum in D1. It will be range
("D1")= "=sum(A1:C1)".
Question is how do I apply same method to the rows below without typing range
("D2")= "=sum(A2:C2)", range("D3") = "=sum(A3:C3)" and list goes on.
So below is the VBA ....
Sub quicker_Option()
Dim toDel(), i As Long
Dim RNG As Range, Cell As Long
Set RNG = Range("d2:d2500")
For Cell = 1 To RNG.Cells.Count
If Application.CountIf(RNG, RNG(Cell)) > 1 Then
[Code] .......
This is the line to debug it says
Range(toDel(i)).EntireRow.Copy ("Sheet2")
Code is attempting to autofilter any rows where text does not contain "0200" as indicated below, and delete all those rows. When reaching the line of code below the macro bombs and I get a "AutoFilter method of Range class failed" error message. Why that line is not being recognized.
Const strTOFIND As String = "0200"
Dim lngLastRow As Long
Dim rngToCheck As Range
'Application.ScreenUpdating = False
With Sheets("Platform")
[Code] ........
Set rngData = wksData.UsedRange
With rngData
' clear existing filter
.AutoFilter
' filter on Owner col F
.AutoFilter field:=6, Criteria1:=varOwner
' check for count > 1 since heading row should always be visible
If .Columns(1).SpecialCells(xlCellTypeVisible).count > 1 Then
.SpecialCells(xlCellTypeVisible).Copy rngOutput
End If
'clear filter
.AutoFilter
End With
Set rngOutput = wksSell.Range("A1")
It fails on the line highlighted in red, and from searches on this forum and google I think I need to specify more exactly which sheet it is. something like wksdata.SpecialCells.... but this doesn't work.
When the public routine ChangeColours is called from a Command button called ButtonX on SheetX it works fine. But a command button called ButtonY on SheetY cannot run it. When ButtonY is clicked, the error is at the line :
Sheets("SheetX").Cells(4,5).Select
Where it says that "Select Method of Range class failed"
Private Sub ButtonX_Click()
Call ChangeColours(0)
End Sub
Private Sub ButtonY_Click()
Call ChangeColours(0)
End Sub...............
Using InputBox Method to Select Range from Other Sheets
I need to select a range of cells from a second workbook via a InputBox or similar.
I'm trying to do that with the following
Sub InputBoxTest()
Dim MySelection As Range
Set MySelection = Application.InputBox(prompt:="Select a range of cells", Type:=8)
MySelection.Select
End Sub
But I can't select a cell range if it is located in other workbook.
Sub a()
z = 4
y = 7
sWork. Range(Cells(1 + nRow(z), 4), Cells(1 + nRow(z), 12)).Replace y, 0 lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False
End Sub
but when I include it in my main code
sWork.[A1:L9] = 123456789
For z = 1 To 81
y = [A1].Offset(nRow(z), nCol(z))
If y > 0 Then
sWork.Cells(1 + nRow(z), 1).Replace y, 0, lookat:=xlPart,searchorder:=xlByRows, MatchCase:=False, matchbyte:=False
sWork.Cells(1 + nCol(z), 2).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False, matchbyte:=False
sWork.Cells(1 + nBox(z), 3).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False, matchbyte:=False
sWork.[A1].Offset(nRow(z), nCol(z) + 3).Value = 0
sWork.Range(Cells(1 + nRow(z), 4), Cells(1 + nRow(z), 12)).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False
sWork.Range(Cells(1, 4 + nCol(z)), Cells(9, 4 + nCol(z))).Replace y, 0, lookat:=xlPart, searchorder:=xlByColumns, MatchCase:=False
sWork.Range(Cells(1 + Int(nRow(z) / 3) * 3, 4 + Int(nCol(z) / 3) * 3), Cells(3 + Int(nRow(z) / 3) * 3, 6 + Int(nCol(z) / 3) * 3)).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False
End If
Next
I get a "Method 'Range' of object '_Worksheet' failed" error at line 9,
when z = 4, y = 7, and nRow(z) is a UDF which = 0.
I have a button on my spreadsheet which activates some code, it has worked perfectly for over a year but now for some reason I cannot get it to work.
When I click on the button now I get the message: Run-time error '1004' Method ' Range' of object '_Global' failed.
the file is far too large to attach here but here is the relevant ...
I'm trying to accomplish the following: on "LogSheet" sheet, click on the DailyCloseButton and have various lists on the "lists" sheet automatically sorted before I save and end. The code below gives an error: "Method ' Range' of object '_Worksheet' failed". I have no idea why it failed.
Private Sub DailyCloseButton_Click()
' DailyClose and sort routine
'Sort lists
Sheets("Lists").Activate
Range("Products").Select
Range("Products").Sort Key1:=Range("Products").Cells(2, 1), _
Order1:=xlAscending, Header:=xlYes, OrderCustom:=1, MatchCase:=False, _
Orientation:=xlTopToBottom, DataOption1:=xlSortNormal.............