With rngData
' clear existing filter
.AutoFilter
' filter on Owner col F
.AutoFilter field:=6, Criteria1:=varOwner
' check for count > 1 since heading row should always be visible
If .Columns(1).SpecialCells(xlCellTypeVisible).count > 1 Then
.SpecialCells(xlCellTypeVisible).Copy rngOutput
End If
'clear filter
.AutoFilter
End With
Set rngOutput = wksSell.Range("A1")
It fails on the line highlighted in red, and from searches on this forum and google I think I need to specify more exactly which sheet it is. something like wksdata.SpecialCells.... but this doesn't work.
Dim toDel(), i As Long Dim RNG As Range, Cell As Long Set RNG = Range("d2:d2500") For Cell = 1 To RNG.Cells.Count If Application.CountIf(RNG, RNG(Cell)) > 1 Then
When I run this code I get a run time error 1004, copy method of range class failed, I have an autofilter on and it is showing 5 rows, the 5 cells in column A of sheet2 gets copied to sheet1 OK but I get the error?
i just figured out that when you change sheets too often in VBA and get an "Activate Method Of Range Class Failed" or a "Select Method Of Range Class Failed" etc, simply retype the sheets command before it
for example :
Sheets("Work1").Select Range("A1:D50").Select
OR
Sheets(Work1").Range("A1:D50").Select
this code in VBA, if used too often or the mentioned sheet is not the currently selected sheet in a Sub, will cause errors, and to correct this, simply type
I am getting this error when I run the following VBA script.
Sub AutoShape3_Click() Sheets("Template").Select ActiveSheet.Copy After:=Sheets(14) Duplicate.Hide wksName.Show End Sub The break mode is highlighting ActiveSheet.Copy After:=Sheets(14) as the source of the error.
I've run this code many times before with no problem. The workbook has 48 worksheets in it. It's my understanding that Excel can handle many more worksheets, so that shouldn't be a problem.
I've developed an administrative package in Excel for an After School Care programme. Essentially, there are 57 Child Records. Each record is stored on its own sheet. There are four other sheets in the workbook: three hidden templates, and the front page which holds a summary of all child attendance and balances.
Up until a short time ago, invoices were created from an "Invoices.xlt" file - the program would open the file as a new book, and copy the 1st Template page out until all invoices were created. This worked fine. I've recently changed this so the Invoice template is stored within the main workbook. After I did this, we started having problems.
We can run off up to 25-35 invoices fine (32 at this stage), but eventually it hits a point where the Activesheet.Copy command fails. After this point it is impossible to copy further sheets. I CAN, however, use Insert -> Worksheet. It is only the copy function that fails.
Because it's such a strange problem, I've uploaded an example with children's names changed. It can be found on [url]
The steps to recreate the problem are simple: Open the file, select all of the children's names (from Child to Child z), and click the "Create Invoices" button at the top.
I have created a spreadsheet that is 38mb and needed to size it down. I recorded the following macro to do this. This essentialy jut copies the top line of the relevant columns on each page and then copies the formulas down, calculates, and then pastes just the values of these calculations, thereby reducing the sheet to a third of its size. The macro works if I run it from the macro option on the toolbar, but when I assign it to a command button I keep getting ' select method
Code is attempting to autofilter any rows where text does not contain "0200" as indicated below, and delete all those rows. When reaching the line of code below the macro bombs and I get a "AutoFilter method of Range class failed" error message. Why that line is not being recognized.
When the public routine ChangeColours is called from a Command button called ButtonX on SheetX it works fine. But a command button called ButtonY on SheetY cannot run it. When ButtonY is clicked, the error is at the line :
Sheets("SheetX").Cells(4,5).Select
Where it says that "Select Method of Range class failed"
Private Sub ButtonX_Click() Call ChangeColours(0) End Sub
Private Sub ButtonY_Click() Call ChangeColours(0) End Sub...............
I have written some code to move data from one sheet to another. Since the from sheet has formulas, I use the PasteSpecial command. I have used code like this for years, and all the sudden, this starts breaking. And, here is the fun part, I run the code and it works sometimes. I never know when it will fail. It is so random. This is killing me. I have tried to create objRange object and assign them and it works sometime and fails others. Also, I tried adding the line Worksheets("Daily Dashboard"). Range ("C72").Select before the first PasteSpecial as to select the cell first before pasting. Then I get the "Select method of range class failed". Lastly, I tried copying the code from behind a worksheet into a new module. The code is triggered by a button on the first worksheet. Still fails.
I'm getting "1004 select method of range class failed" on the Range statement below. This code is preceded by a number of range selection and formula-setting statements, nothing unusual.
I have a macro that opens a specified woorkbook that changes every month. There are formulas which are pasted to range I1 of the new workbook to calculate the totals on this sheet. Everytime i run the code though, I get an error that says "Select method of range class failed" and Range("I1").Select is apparently the error.
I m trying to use some simple macro recording for a command button click. I keep getting the "Select method of range class failed" error from the following code. From reading the forum it seems to be a common mistake by newbies, couldnt work it out for myself though...my command button is located on a different sheet to where the select function must work...from the code you can see that there are around 20 sheets that need to be used from the one command button...
Why I'm getting the above error when I try to copy and sort data into a workbook?
I'm using this:
Code: Sub GetData1() Dim SaveDriveDir As String, MyPath As String Dim FName As Variant SaveDriveDir = CurDir MyPath = Application.DefaultFilePath 'or use "C:Data"
[Code] .......
To import the data and then these lines to copy the unique records to a range:
Macro has been working fine for ages suddenly have received this consistently?
It's not debugging to allow me to see the route of the problem.
i've googled and seen it's normally a use of select but can't see any issue in my code or understand why it would work for months and now stop.
note: also after i click Ok on the error the macro seems to continue running and data is pulled through. ...but this message comes up every time so it's questioning the reliability of the data it's pulling.
Check Personnel Number in Data Tab with Personnel Numbers in Insert Tab. If they match copy that row from Insert Tab and paste it into the next available row in the Moves Tab.
I have an excel sheet being used as a mini database table.Rows = records, columns = fields. I have some VBA to create a copy of base template in the workbook, then populate the new template with the data from a row/record in the db. I currently have about 100 records. After about the 57th record I recieve RT error 1004. "Copy method of worksheet class failed". I think this is becuase excel is running out of memory. My laptop has 1gig of ram, and i have closed all other apps when running the macro.
Is there a way to free up memory while the vba is running, without clearing my "for" or count position which tells the macro to create a new sheet and which row/record in the db to populate the data in the new sheet.
I am getting the following error: Run-time Error '1004': Copy method of Worksheet class failed. after adding 53 worksheets to a workbook using VBA. I found several posts concerning this error in the forum. However, I did not find any responses that address the root cause or provide a solution.
I'm attempting to write an OutLook 2007 macro that extracts excel spreadsheets from incoming email and saves them as a .csv file. Before saving the file I need to delete the header row. I am getting a "Error 1004 - Delete method of range class failed" error when running this code.
Here is the code: (the bolded line is where I'm getting the error)
Public Sub ConvertToCsv2() Dim xls As Excel.Application Dim oWB As Excel.Workbook Dim tmp As String Dim ws As Excel.Worksheet
As part of a larger Macro I have the following Code:
Range("X2").Select ActiveCell.FormulaR1C1 = "=IF(RC[-1]>0,""Yes"",""No"")" Range("X2").Select Selection.AutoFill Destination:=Range("X2", "X" & lastRow) Range("X2", "X" & lastRow).Select Selection.Copy
The code works fine when I have more than two rows of data that I am manipulating but gives me an Run Time Error - AutoFill Method of Range Class Failed at the following line:
Selection.AutoFill Destination:=Range("X2", "X" & lastRow)
When I have only one row of data I get the Run time error.
Any code that will allow me to process the data if I have one row of data as well.
I have two separate workbooks, the first is called Job test and is to be used as a template for quoting jobs, the second is called Fixtures and is a database of fixtures that are organized in table. I keep them separate as multiple jobs will use the Fixtures DB workbook and I want to be able to update it and add new fixtures in one area. In order to facilitate this I have a macro that opens the Fixtures DB workbook anytime that the Job test workbook is opened. In the Job test workbook I have multiple dropdowns that I hope to make dependent or cascading by means of filtering the Fixtures DB workbook. The issue I have run into is with the following code.
What this code hopes to achieve is that when I change the value in the LightType dropdown, the Fixtures DB workbook will automatically filter the data once to a different sheet(CLampType), then get only unique values for LampType in column O. I have set up a dynamic range for column O so as to populate my next combobox, LampType.
This should all be fairly simple and straightforward, however I am running into "Run-time error '1004': Clear method of Range class failed." when I try to execute the line to clear the worksheet, and also have an error when I try to filter the data via macro. The strange part is all of this can be done manually without a problem, and moreover I have tried recording the process and using the recorded version. Even stranger yet is that when I add an "on error resume next" before everything, the code works fine but keeps looping and acts finicky(I don't want to simply resort to this as a solution). I have also tried setting this macro up inside the Fixtures workbook instead and calling it from the combobox change, to no avail.
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed" have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
