I had to add a column to all worksheets... so edited the code so it would still refer to the correct cell. I changed the two references to "K54", to "L54"... but following this change, I get an 1004 error stating "Select method of Worksheet class failed", and the following line is hi-lighted.
ws.Select Replace:=False
Sub PrntUsedShts()
Application. ScreenUpdating = False
'set page counter
Dim PgCnt As Integer
PgCnt = 0
'select sheets to print
For Each ws In ActiveWorkbook.Sheets
If ws.Range("L54").Value > 0 Then
ws.Select
Exit For
End If
Next ws...............
Run-Time error '1004': Method 'Range' of object'_worksheet' failed
The Function basically takes any cell in range with a formula and has it blue. If the formula is overwritten by the user it turns the cells colour Red.
Private Sub Worksheet_Change(ByVal Target As Range)
'change Colour of cells from blue if formula based to red if data typed by user
If Not Intersect(Target, Range("AS63,BA5:BP66,BT7:CI55,BU60:BU64,BX60:BX64,CA60:CA64,CD60:CD64,BT55:CI66,BT59:CI59,CF7:CF55,CF65:CF66,DJ19:DJ21,DJ24,DL5:DM36,DJ41,DJ45,DJ48,DL41:DM48,DH50:DH51,DJ50:DJ51,DL50:DM53,DH63,DJ63,DL55:DM58,DL60:DM66,DU5:DV33,DU37:DV58,DZ8:EB8,ED5:EE27,ED31:EE66,EM5:EN12,EM16:EN29,EM33:EN38,DH63,AL5:AM26,AL30:AM49,AL53:AM66,AV5:AW16,AV20:AW29,AV33:AW53,AV55:AW63,CO5:CO66,CQ5:CR66,CY5:CY66,DA5:DB66,DJ5:DJ7,DJ14:DJ15,DJ17")) Is Nothing Then If Target.HasFormula Then Target.Font.ColorIndex = 11 Else Target.Font.ColorIndex = 3 End If End If End Sub
The following code works fine, but when I put the code in an ActiveX Combobox Change Event it gives a run-time error 1004. ("Select Method of Range class failed")The error occurs on the following line
Code: Worksheets("SAVED").Range("A" & l).Select
Code: Dim l As Long Application.ScreenUpdating = False l = Application.WorksheetFunction.Match(Worksheets("DATA").Range("O34"), Worksheets("SAVED").Range("A1:A10000"), 0) Worksheets("SAVED").Activate 'ROSTER=== Worksheets("SAVED").Range("A" & l).Select Selection.Resize(1, 739).Offset(1, 2).Copy
I encounter an problem when I migrate the excel application from excel 97 to excel 2000. The application basically composed of VB6 and VBA. When the program execute to line "ChangeHistoryDuration", i.e.
'Turn On the Audit ExlApp. ActiveWorkbook.KeepChangeHistory = True ExlApp.ActiveWorkbook.ChangeHistoryDuration = gi_duration ExlApp.ActiveWorkbook. SaveAs w_filename, , gs_open_pwd, gs_write_pwd, , , xlShared
Run-time Error '1004', Method 'ChangeHistoryDuration' of object '_Workbook' faild was found. However, it runs successfully in excel 97. Does anyone know the possible problem that cause such error.
I am getting Run-time error 1004 "Cannot Change Part of a Merged Cell". I am trying to copy Sheet1 cell E11 (merged cells E11:G11) to Sheet2 cell E11 (merged cells E11:G11).
Sub PartBalance() With Sheets("PART REQUEST") If Range("D11").Value - Range("K11").Value 0 Then
I have been facing a run time error 1004 ("Cannot change part of a merge cell") when I am to run the following code. I have some merged cells in my excel sheet.
Sub Save2013()Sheets("Invoice").Range("I25:I33").ClearContents Sheets("Invoice").Range("K25:K33").ClearContents Sheets("Invoice").Range("K15:M19").ClearContents Sheets("Invoice").Range("E15:G17").ClearContents Sheets("String").Range("I58:J58").ClearContents Sheets("Invoice").Range("T14:V1419").ClearContents ActiveWorkbook.SaveEnd Sub
When I paste data in Sheet2 in the attached CF Example2 file (Just by Selecting A1:L18 Cutting it and Pasting in the same place), the action of the VBA code in the Thisworkbook is correct but I am getting the 1004 Error Message from the VBA debugger saying "Run-time Error '1004': Application-defined or object-defined error
Its copying the data just fine, but its having issues with pasting it. The data should be pasted into the same corresponding columns (so also starting in A Column), in the next available row (in Column C from row 2 on).
I am using the following macro to format a sheet - I recently added a auto-fill part to it which essentially moves a number from one column to another and autofills it in all the cells until it encounters another number of the same kind in the column it moved the previous number from.
When I try to run this macro it does everything upto the auto-fill part and then gives me error 1004 [the set cell = cell.offset(1,0) ] is highlighted in yellow.
The following five lines of code are inside a loop in which i goes from 1 to 600. When i was 594 a condition allowed these lines to be executed. (The last was in my original code and the others were just added to try to figure out why the last had a problem.) The first three work and the last two trigger error 1004 "Application-defined or object-defined error." All I am trying to do is to fill some cells with a dummy value. It doesn't matter whether I try to fill with 1 or with "1".
Whether or not there is a different or better technique for filling cells, the range specification is the real issue I am trying to solve. The referencing issue produces the same error later in the module where more complicated work is being done.
Bonus question: is there a general prohibition forbidding the mixing of range("a1") and cell(1,1) styles of addressing in the same line of code? (Not a factor in the immediate problem but related to previous problems I have encountered)
I searched these forums for any old posts to work around this but did not find any threads. If anybody knows a good thread about this, I would be greatful.
Basically I run some code to generate Startcolumn, StartRow, EndColumn, EndRow. If there is a limitation of 256, the code is basically useless. I don't know of a way to use the A1 range method whilst using the Range("A1:....")
It is designed to submit data specific cells from a userform. It works fine when I select and day, 1,2,3, etc. until I get to day 27-31. For some reason I get a Range of Object Failed error 1004 every time. I don't understand what's changing to cause the issue. The red text near the bottom is the one that it tells me is the problem.
Code: Private Sub Submit_Click() Dim ws As Worksheet Set ws = activesheet
I have code that opens a workbook then selects a range on a specific sheet. All the code works fine (the workbook opens, then the sheet is selected) up until it gets to:
Range("BM9").Select Then I get a run time error 1004
Range(Cells(1, a), Cells(b, a)).Formula = _ "=(rc[-1]-" & min & ")/(" & max & "-" & min & ") "
When it is executed i get the 1004 error ("application-defined or object-defined error)... min and max are defined (as worksheetfunction.min and max of a selection), and their values are correct. The problem seems to lie in the max variable, namely if i simplify the formula to just
Range(Cells(1, a), Cells(b, a)).Formula = "=(rc[-1]-" & min & ")"
it works ok, but if it is
Range(Cells(1, a), Cells(b, a)).Formula = "=(rc[-1]-" & max & ")"
I get the error. I am completely baffled considering both variables are defined in the same way i.e.
min = Application.WorksheetFunction.min(Selection) max = Application.WorksheetFunction.max(Selection)
I have a workbook that I am getting the error select method of range class failed. I am not sure what I have done wrong? I have a worksheet called Unit Tools that I would like to import the information in column B from another worksheet called Tool Catlog. This is the code that I used and I am getting a run time error 1004 with the above message. I am not really great with VBA but I am learning from the examples and questions that people have put on here.
Private Sub CommandButton4_Click() Sheets("Tool Catalog").Select Range("B3:B173").Select Selection.Copy Sheets("Unit Tools").Select Range("A3").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
I'm trying to find the last row on a sheet and then set the next cell, in column A to a certain value. It fails with Method 'Range' of object '_Worksheet' failed.
'activate the male page sMalePicks.Activate
'add to last row of male baggage lastRow = sMalePicks.Cells.Find(What:="*", _ SearchDirection:=xlPrevious, _ SearchOrder:=xlByRows).Row
I'm getting a Run-time Error 1004 when using a Range(rangestring).Select.
It only seems to occur when I'm trying to select more than 35 cells. Up until 35 it works just fine.
My code is designed to select individual cells in a worksheet based on user selections from a list, and as I said, works fine unless they select more than 35 items.
Is there a limit to how many cells can be selected using Range...Select? If so, I can't find it documented anywhere.
I'm trying to do a simple loop which creates charts based on an ID number. I recorded a macro and has tried to modify it but am having trouble defining the correct reange when settign the data source. Here is my
I'm attempting to write an OutLook 2007 macro that extracts excel spreadsheets from incoming email and saves them as a .csv file. Before saving the file I need to delete the header row. I am getting a "Error 1004 - Delete method of range class failed" error when running this code.
Here is the code: (the bolded line is where I'm getting the error)
Public Sub ConvertToCsv2() Dim xls As Excel.Application Dim oWB As Excel.Workbook Dim tmp As String Dim ws As Excel.Worksheet
When I run this code I get a run time error 1004, copy method of range class failed, I have an autofilter on and it is showing 5 rows, the 5 cells in column A of sheet2 gets copied to sheet1 OK but I get the error?
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed" have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
I have a cet of CommandButtons on sheet 1. The code for these buttons is in the code section of the sheet. A named range is referenced in this code. This named range is on sheet 2. Every time I try to reference this or any named range (from any other sheet), I get this "Run-time error '1004': Method 'Range' of object '_Worksheet' failed"
The last time I had this error I was able to fix it by moving the code to Module1. I tried that here, but it did not work (I can't figure out how to call it from the sheet). CommandButton. Here is the code from the sheet for one of the buttons:
Private Sub TBEnterUp_Click() iLast = Range("WBDate_DayLast").Value '<<<<<<< iItem = TBEnter.Value If iItem = iLast Then TBEnterUp.Visible = False Exit Sub End If TBEnter.Value = iItem + 1 If iItem > 0 Then TBEnterDown.Visible = True End Sub
It is a simple number advancer. It is working in the UserForm I took it from. I have included a sample file of the problem. Feel free to look at it and borrow anything in it that you might like.
