I have code that opens a workbook then selects a range on a specific sheet. All the code works fine (the workbook opens, then the sheet is selected) up until it gets to:
Range("BM9").Select
Then I get a run time error 1004
I tried Cells(9,65) it does the same thing,
This line of code generates the error: Run-Time Error '1004' "Selection Too Large
With Range("n4:ae" & Range("b" & Rows.Count).End(xlUp).Row)
.FillDown
In my curious nature, "What is occuring" and "Why"?
There are about 6200 rows of data.
Range(Cells(1, 1), Cells(257, 257)).Select
This gives the Run-time error '1004'
I searched these forums for any old posts to work around this but did not find any threads. If anybody knows a good thread about this, I would be greatful.
Basically I run some code to generate Startcolumn, StartRow, EndColumn, EndRow. If there is a limitation of 256, the code is basically useless. I don't know of a way to use the A1 range method whilst using the Range("A1:....")
I'm getting a Run-time Error 1004 when using a Range(rangestring).Select.
It only seems to occur when I'm trying to select more than 35 cells. Up until 35 it works just fine.
My code is designed to select individual cells in a worksheet based on user selections from a list, and as I said, works fine unless they select more than 35 items.
Is there a limit to how many cells can be selected using Range...Select? If so, I can't find it documented anywhere.
I lost 2 days trying to discover the bug in my program, but I coudn't find the right answer.
How can I activate the AutoFilter to show me the rows selected with "YES" ?
This is the code... The compiler stops always at the command Selection.AutoFilter.
I am trying to build a macro which will format the columns of a spreadsheet - basically it inserts some columns, writes formulas and highlights them. Here is a code I have got so far...
When I try to run this I get a run time error 1004 - Method 'Range' of 'Object'_Global' failed. The part of the code
Range("N2:N").FormulaR1C1 = "=(RC[-7]/RC[-2])"
is highlighted in the debugger.
Can anyone tell me why this is happening, also it would be great if you could suggest better ways of writing this code - as I am new to vba programming and most of my macros are built using the recorder and then 'working' on them.
I have an interesting error that only happens when there is one row of data in the worksheet (sheet2 or "Half Payout"). Rows 1 & 2 are headers, row 3 is when the data starts - if any. With either no rows of data or more than one the coding works just fine. Here is the exact error message I'm getting: Run-time error '1004': Method 'Range' of object '_Worksheet' failed.
The following code is supposed to sort the rows of data when opened and then activate the first open cell below B2.
This very simple macro in Personal.xlsb is driving me crazy!
I want to paste a previously selected and copied range at the current position as values. The range will seldom be the same as previously, and the position where it will be posted will be random too.
The code is: ...
I found the following code on your forum, but get the following error:
Run time error '1004'. Autofill method of Range class failed.
The error occurs when the spreadsheet either have 1 row of data completed or no data, can I get code to ignore the autofill when I only have 1 row or no rows completed in various spreadsheets. I have attached a copy of the spreadsheet.
Run Time Error 1004 when selecting range on another sheet using a command button. I have created a command button that plays the following macro.
View 2 Replies View RelatedI am trying to autofill a range of cells in column L (12). I first copy the formula and add an equal to (=) sign to it. then this is copied to cell L14 (The first cell of the intended range).
After this I find out the last filled row (using FOR loop and a counter 'c').
After this I use the Autofill option but I get an error.
Run time Error '1004':
Autofill methodof Range class failed
This file has been running just fine....
But now I got this
Run Time error '1004':
PasteSpecial method of Range Class failed.
I am trying to create a macro in my personal macro book such that whenever any workbook is opened the calculation settings (tools, options, calculation tab) are set to semiautomatic and do not calculate before save. The macro works when I am opening Excel itself (Book1) but when I open an already saved file it gives me
Run-time error '1004'
Method 'Range' of object'_Global' failed
From there I choose Debug, the VBE window comes up, and I hit F5 to continue the code without doing any actual debugging. Here is the code that I am using. This is in the Personal Macro book on the "This Workbook" section....
I have a userform that allows the user to view, modify or delete individual records (rows) of a worksheet in a workbook. If a particular item in a record is modified, a check occurs to ensure that the values for that item remain unique. All of that works exactly the way I need. The breakdown occurs when the records are then autosorted by a the values in a particular column. After the autosort, another column of values is copied and pasted to a different worksheet within the same workbook. For this to work properly, I must have the userform open along with the worksheet containing the records. If the userform is open with any other worksheet open, I get the following VBA error message "Run-time Error '1004' : Slect method of Range class failed". I need to be able to open the userform with any worksheet active and not experience this error when the autosort, copy/paste occurs. This is the code for the user form, the module for autosort, copy/paste and checking for unue values.
This is the sub in the worksheet with the records
'This checks for unique values
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim LLoop As Integer
Dim LTestLoop As Integer
Dim Lrows As Integer
Dim LRange As String
Dim LChangedValue As String
Dim LTestValue As String
Dim smessage As String
'Test first 7 rows in spreadsheet for uniqueness
Lrows = 8
LLoop = 2
'Check first 7 rows in spreadsheet
While LLoop <= Lrows.........................
I have constructed the following code to set the print area of worksheets that have been selected to print to the range referenced in a worksheet level named range "xPrintArea". This named range is set using the OFFSET function. The procedure also sets the left footer to be a copyright notice that is also contained in a cell referenced by a named range.
Set oPrintArea = Range(sPrintAreaName)
is generating the error "Methd 'Range' of object '_Global' failed".
Note that the line
Set oCopyrightNotice = Range("CopyrightNotice")
does not generate this error. From what I've been able to determine from other research on this forum and others, I believe the problem is that I need to more fully qualify the object which Range(sPrintAreaName) is referencing. I've already tried to use
Set oPrintArea = wkSht.Range(sPrintAreaName).................
I get the following error: Run-time error '1004': Select method of Range class failed at the following code line:
Worksheets("Sheet1").Range("A6").Select
I am using the following code and I'm getting a Run-time error '1004' error. When I reconstruct the macro one line at a time and run the macro between adding each new line - no error. After reconstructing the macro in its entirety, I can run it once with no error. However, if I try to run it again immediately after that, I get the error and I keep getting the error every time I run it from there on. I dont understand how it can work once and then stop working. Here is the full
Sub MoveToRoster()
ActiveSheet. Unprotect
Dim item As Long
Dim myString1 As String
Dim myString2 As String
Dim myString3 As String
item = InputBox("Please Confirm The Row Number Of The Child To Be Moved To The Roster.")
myString1 = "c" & item & ":e" & item
myString2 = "g" & item & ":n" & item
myString3 = "c" & item & ":e" & item & ",g" & item & ":p" & item ..........................
Newcomer to Excel 2007 but long time programmer for Excel 2003. I am having problems with code that I feel should work. Code fails at the Select command with a "Run-time error '1004': Select method of Range class failed:
View 3 Replies View RelatedI keep getting this "Run-time error '1004', Method ' Range' of object '_Global' failed" Here is the code that has the problem:
Option Explicit
Dim i As Long
Dim j As Long
Dim lDup As Long
Dim lRow As Long
Dim NoDupes As Collection
Dim rRng As Range
Dim Rng1 As Range
Dim Rng2 As Range
Dim Rng3 As Range
Dim Swap1 As Variant
Dim Swap2 As Variant
Dim wks As Worksheet
Private Sub UserForm_Initialize()
Call DefaultSet
For lDup = 1 To 3
Call NonDuplicatesList(lDup)
Next lDup
End Sub.....................
It does not even loop once though the original UserForm_Initialize For/Next loop.
I've been trying to copy values from one range to another, and the ranges need to be dynamic. Normally I use a combination of the 'range' and 'cells' properties, like this:
View 2 Replies View RelatedI have a sheet that will force user to enable macro before revealing the sheets and enabling them to key in data. But because I need to protect the workbook from user deleting sheets and also having some locked cells. I got the run-time error 1004 unable to set visual property of worksheet class
View 1 Replies View Relatedthe problem I'm having is that when trying to copy the value of cell A2 and paste it in cell A4 with (INSERT with the second button of the sheet). this give me the error RUN TIME ERROR '1004 '.
View 7 Replies View Relatedhaving a nightmare with a pivottable in VBA. I cannot give it a dynamic datasource. Surely i must be coding this wrong.
it breaks on setting the range for PTRange with the error
Run Time Error '1004'
application-defined or object-defined error
Im almost finished my first code where the basic idea was to make activecell.name=activecell.value in the first column for the first 3 sheets. After messing with it i figured i couldnt have spaces in the cell name...then i learned i couldnt have random '()-'/ either. So i have the code formatted to do that and then its supposed to call to rename everything as well. but after the 1 sheets column is renamed the 2nd sheet gets error 1004 when range("A3").select is hit. What gives?
This is what ill be using the code on
[URL]
Here is the code
Code:
Sub RemoveChars()
' Works through first 3 sheets '
Sheets(1).Select
[Code]....
I am receiving the error:
Run-time error 1004 Application-defined or object-defined error.
It is occuring on the line of
Selection.QueryTable.Refresh BackgroundQuery:=False.
I am using SQL '05, Excel '03, and VB 6.3. I am trying to run a SQL stored procedure into Excel. So far all of my VB code seems to be running fine.
I am using the below code to select some spreadsheets under a folder, open them, select the entire font, change it to Arial and close the file. I am passing the file names from Column A and calling the below procedure in a loop. Everything works fine except the below problem.
If the file name I passed doesn't exist or the file is not accessable, I am getting an error message "File cannot be accessed. The file may be read only......" with two options "Retry" and "Cancel". When I click Cancel , it takes me to my code and stops at the line marked in red with Run-Time error '1004', Method 'Open' of Object 'Workbooks' failed. When the above error occurs , I need to just pass the value "ERROR" to ErrMsg filed and proceed further with the next file name.
Sub ChangeFont(FileName As String)
Dim objXL, objWb, objR ' Excel object variables
Dim Title, Text, tmp, i, j, file, name
Dim strPathToSaveTo As String
Dim strFileName As String
Dim wkb As Workbook
Dim wkb2Print As Workbook
strFileName = FileName
Application. ScreenUpdating = False
Set wkb2Print = Workbooks.Open(strFileName)
Cells.Select
With Selection.Font
.name = "Arial" .............
I have 4 command buttons (A-D) so that the users can update after inputting new or revised Data.
My problem is that if updated in order, button D Macro below stops at the first "Selection.AutoFilter..." as if it cannot turn on the Auto Filter.
It will run if I manually set the AutoFilter on the sheet.
I think, and as I am completely new to this please feel free to correct me, the reason that it stops is that on the Button B is a "AdvancedFilter" Macro.
I have a piece of VB code that works perfectly on my pc. The spreadsheet has been emailed to a partner (different company) and the code no longer works and they get the run-time error.
Private Sub cmdPrintandsave_Click()
Dim Company As String
Dim irow As Long
Dim MyDate
MyDate = Date
Dim wsD As Worksheet
Dim wsD1 As Worksheet
Set wsD = Worksheets("AppBDataSheet")
Set wsD1 = Worksheets("AppBPrintable")
Company = Application.OrganizationName
Application.ScreenUpdating = False................
I have inherited a spreadsheet and code that I don't understand much about. I have code
Range("B4").Select
ActiveSheet.PivotTables("Kh07Pivot").PivotFields("Specialty").Subtotals = Array(False, _
False, False, False, False, False, False, False, False, False, False, False, _
False, False, False, False, False, False, False, False, False, False, False, _
False, False, False, False, False, False, False)
which error (run time 1004) and says 'unable to set the SubTotals property of the PivotField class'. If I make the number of False's equal to 12, then it doesn't error. However I don't know whether it is having an adverse effect on the data?
Every time I run it I get a Run Time Error Message 1004 when trying to custome sort on D4.
Rng2.Select
With Selection
.Validation.Delete
.Sort Key1:=Range("A4"), Order1:=xlAscending, Header:=xlYes
.Sort Key1:=Range("D4"), Order1:=xlAscending, Header:=xlYes, _
OrderCustom:="L,M,H,Contract", DataOption:=xlSortNormal
End With