I have the following code:
[Code] ........
HierLastRow shows as 165 in Locals which is correct. When I look at HierUID in Locals the Range is B2:B2 and not B2:B165. How can I make the Range set correctly?
I got a problem with displaying my dates correctly on the X-axis of my combined column - line graph. For some reason X-axis labels appear as consecutive numbers with regards to number of data points. Please see attached.
Also, why does the indent change as seen in this screenshot?
Last but not least, how can I prevent my secondary axis label from coinciding with the labels as seen here?
May_Daily_and_Total_Revs_by_date.xlsx
If I declare a variable i to be an integer and then initialise it say i=10, I can see its value in the locals window.
However, if I define myrng as range and set myrange = Cells(1,1), looking at the locals window for myrng brings up a whole wealth of information.
I'm in the process of writing/editing a macro, but after I run the macro once, the Expressions in the Locals Watch window disappear, and if I try to run it again it produces an "Excel has encountered an error and needs to close". The macro probably doesn't make much sense out-of-context, but perhaps there's a glaring error that's causing this. A guess - possibly related to the Error Handling in the vba? (1st time I've used this in a macro).
Option Explicit
Sub Compare()
Dim strNaspK As String
Dim strCtryK As String
Dim intCtryRev As Integer
Do Until ActiveCell. Offset(1, 0) = ""
ActiveCell.Offset(1, 0).Select
strNaspK = ActiveCell
strCtryK = ActiveCell.Offset(0, 2)
On Error Goto ErrJump:........................
Basically, I've got two sets of data on different sheets, with NASP ID and country being variables. Just trying to import the data from the 'Comparison' sheet, if both the NASP id and country matches that on the first sheet, established by the variables.
I am using a multi-column listbox on a worksheet. When I select an item from the listbox, the value from the listbox first column should populate the first empty cell in a range of cells L:16 to L:25. This should be easy but I cannot get it to function. Below is the code I used prior to modifications I made to the worksheet.
VB:
Private Sub ListBox1_click() 'allows user to select item from list box and paste to datagrid
Dim lngLastRow As Long
Dim lngcol As Long
[Code]....
I have a spread sheet that I pull data from different columns on a particular row. The problem is the code I used works great as long as the column never moves from its current location. Is there a way to use a named range to make the following piece of code work, so no matter how many columns are added or deleted the data is pulled correctly?
View 2 Replies View RelatedI want the user to press a button on the spreadsheet and this should then result in a popup box appearing on the screen asking the user one question ie "what is the current rate"
The user will then enter for example 20%. I then want to transfer this number to cell A1 on sheet 1.
i had a situation where i import data from web.The sheet contains date & other columns.Whenever,i copy the data and paste it in my worksheet Using Paste Special >> Values i get some numbers instead of Dates.How would i correct the numbers to date format with out loosing the original date format(DD-MM-YYYY). Also the dates are aligned irregularly when i paste them to column.
View 3 Replies View RelatedI have a workbook with several drop-down lists. The names for the lists are on a seperate sheet in the same workbook. I have used data-validation and allow list in all the cells with drop-downs. I have used =NAME in the source. I opened the workbook this afternoon for the first time in a couple of days and I am no longer able to select from a dropdown. I can type in the cells, but if I type something not included in the list, I get the "The value you have entered is not valid" error. So I feel like the validation is working on the cells, I'm just not able to select from a drop-down list. "In-Cell dropdown" is selected.
View 9 Replies View RelatedI have a work sheet with multiple columns and rows. In one column there is unique number which is appearing in multiple rows but it is appearing in different rows more than once like this:
ColumnB
KA0012
KA0012
KA0013
KA0013
KA0013
Now i want to calculate this e.g KA0012 appearing twice as one number similarly KA0013 appearing thrice as one number how can i do it?
I have my results in cells B2:B55 consisting of three signs which are 1, X and 2.
AB1DateResult218-08-131325-08-132401-09-13X508-09-132615-09-132718-09-132822-09-13X925-09-1311029-09-1321102-
10-13X1206-10-1311313-10-1321420-10-1321523-10-1321627-10-1321730-10-13X1803-11-1311906-11-1312010-
11-1312117-11-13X2224-11-1312327-11-1312401-12-1312508-12-13X2611-12-1322715-12-1312818-12-1312922-
12-1323005-01-14X3112-01-14X3219-01-1423326-01-1423402-02-14X3509-02-1413616-02-1413719-02-1423823-
02-14X3926-02-1424002-03-14X4109-03-1414216-03-1414323-03-1414426-03-1414530-03-14X4606-04-1414713-
04-1424820-04-14X4927-04-1425004-05-1425111-05-14X5218-05-1425325-05-1415401-06-1415508-06-1415611-07-14?Sheet1
Is there any way the next falling sign can be predicted in cell B56? And if so, what would be the measures to guess the next sign?
I am joining two columns of data. first col. has size in fraction format: 7 3/8
second column has text string:
HABITAT CINCY POD HAT ERA BLK/RD
Concatenate= HABITAT CINCY POD HAT ERA BLK/RD 7.375
Changing fraction to decimal, needs to remain fraction.
I have played w/ the formatting to make Number w/ zero decimal places and then selected Fraction, but no luck there.
Something seems to have happened to my Excel. When I make changes and close the workbook or application, the pop-up box asking "Do you want to save the changes you made to [Book1]?" no longer shows up.
So far I've tried running a macro with Application.DisplayAlerts = True, but that only seems to work while the macro is running.
I am trying to open a workbook, testt.xls, through visual basic. Below is the code I am using, but when I execute the code, no workbook appears. Excel itself does not even appear. What am I doing wrong?
Workbooks.Open FileName:= _
"C:Documents and SettingsRaMy DocumentsPortfolio Documents estt.xls"
I have a timesheet from which i need to calculate the number of hours put in by employees on a weekly basis.The timesheet can vary with months and number of employees can also change.
Part of code is below:
Dim i As Integer
Dim j As Integer
Dim c2 As Range
Dim startday As Integer
Dim tempnd As Double
Dim tempdys As Double
Dim weekndsum As Double
Dim weekdysum As Double
Dim store_date As Date
m = 12
store_date = thisDate
For i = 20 To 400 Step 5 "value hardcoded
In this i have hardcoded the value,I need it search auto and run till the last used cell.It should replace the number 400 {in my code above}with the last row used.
I created an addin with CUSTOM tab (used custom UI editor) to manipulate the ribbon xml.It works fine at home computer and @ work I distributed and install in user> addin directory and activated using excel options> addin>
But the ribbon I created does not appearing (tried on couple of computers) no luck
I would like to parse the below :
Say this appears in A column , I want to parse all the characters appearing after the numbers (i.e., 8.625% /5.875%/6.125% ) in B column - Any excel formula ??
Alere Inc. 8.625% October 1, 2018
Delphi Corporation 5.875% May 15, 2019
Delphi Corporation 6.125% May 15, 2021
So B should column like below
8.625% October 1, 2018
5.875% May 15, 2019
6.125% May 15, 2021
Basically upon opening my workbook, I have some code that runs to loop through all the sheets and make certain sheets visible based upon which password the user enters. However, I also have some code upon activation of some of these sheets to have a msgbox pop up explaining what the sheet is about. I obviously dont want these to appear when the initial loops is going through activating the sheets one by one - I only want these msgboxes to appear when the user subsequently opens one of these sheets.
View 4 Replies View RelatedI have an excel table as below from where I am generating a pivot table:
Region
Project Name
Is this a new Project?
CE
AA
Yes
CE
BB
No
[Code] .......
The pivot looks like this:
I just need to show the records which are "New Projects" (for which "Is this a New Project?" is "Yes"). Hence I am filtering the pivot for "Yes" records only.
All regions are not appearing in the pivot. I also need to show other regions which are missing (viz,ESE & WE) with 0 values.
I know the code is long, and bad, but I'm including it anyway in the hopes that it will give some clue. The activeworkbook.refreshall refers to a bunch of queries on other tabs of the workbook using VisualFoxPro ODBC if that matters...
View 9 Replies View Relatedto create a macro that counts a number of values for a couple of types. The list looks like this;
29 bananas
13 apples
18 bananas
14 pears
7 pears
etc.
So i want to create a loop the goes through the list and adds up all bananas, apples and pears. How do I do that in the best way?
i have been having this problem with my version of excel at work and it is driving me crazy. First of all this is excel 2000. For a while now I have been unable to use the control toolbox - when I click it - nothing happens. In the meantime I havent been doing anthing really serious so I used the forms toolbar. I have tried using the control toolbox in word - and it works - just in case someone had been messing around and uninstalling things. Is there anyway that I have hidden it somewhere?
View 6 Replies View RelatedI must highlight cells that appear more than once.
What I mean is that if an item in a cell appears more than once I highlight it in blue, if the same happens twice I highlight that cell red etc and so one. does anyone know how to do this in excel.
is there any way to hide the comment box associated with with red triangle in the cell.when mouse is on the cell having comment (red triangle) the yellow colour box should not appear.
View 8 Replies View RelatedI am having a major issue with one of the functions of excel I never knew existed: the data form. Somebody created the spreadsheet I am using before me so I am editing what someone else has already done. They have a spreadsheet set up that holds multiple records about company information (a database you could call it). A data form has also been set up which works nicely to edit records. The issue I am having is that I was asked to insert one column to the database, which I did. Now I cannot figure out how to add this last column to the data form. I tried reselecting all cells, trying to recreate the dataform, but nothing works!
View 3 Replies View RelatedI have not asked for this Dialog Box, but it appears when I open the workbook.
I must have done some strange things - hope someone can give me a hint.
I have attaced a picture of the Dialog Box.
Suppose a name is typed in a cell as the First name in the front and the Last name following it e.g. Jupiter Jones.
Can it be reversed in the same cell so that it appears as Jones Jupiter i.e. with the last name in the front and the first name following it.
I have uploaded a sample sheet to illustrate what I am looking to do.
I want to pull out all instances where the four sheets of a 'book' are the same and appear in the same order. (column b is not really important) I have thousands of 'books' in the sheet so doing the task manually is not really an option.
My Excel gets stuck in a strange world sometimes where it seems like a pop-up blocker is turned on. By this I mean that i can't get question alerts to show in Excel. My only relief has been to reboot.
Here's what I mean - I generally see this two different times:
If I'm in a document that I've modified and click the "X" to exit the file - it never asks me to save, just closes without saving.
When I do a "find" on an item, I do get the first box where I can specify my search criteria. If there is a match, it will take me to the match if I do a find next. However, if I do a find all or there is not match, nothing else happens. I can see the cell addresses flickering in the name box.
I would like to modify the below macro so it only counts a word once even if it appears more than once in a row. The reason I want to do this is so I can get a snapshot of the data without certain terms being over-represented.
For example, in the attached example the word 'Microsoft' appears 5 times in row 4 but I only want this to be counted once. In the whole data set Microsoft appears 20 times but only in 7 of the 20 rows so I would like the count to be 7.
The example is set out as follows: In column B there is a description field which in practice will contain consumer complaints and inquiries. To keep the data anonymous the description is filled out with random words and all other columns are blank. The output of Andy Pope's unique word counting macro appears in I:J.