I have range of data where i want to randomly select a value in that range but what i want is to visually see it activating random cells and then finally select 1 at the end. Its just more of a nice visual effect and then select a value/cell.
This code just goes through all the cells but not exactly what i want to do.
Code:
Sub test()
Dim ws As Worksheet
Dim cell As Range
Set ws = Sheets("Sheet1")
For Each cell In ws.Range("Data")
cell.Activate
Next cell
End Sub
I am new to VBA. Using Excel 2010. I have a date picker on a userform named LtPayCalFm1. I have created a named range on a sheet within the workbook called LQD which is a date. I want the date picker to show the date LQD when the form opens. The code I have is
Code:
Private Sub LtPayCalFm1_Initialize() Dim LQD As Range DTPicker1.Value = LQD End Sub
I get Run time error '380': Invalid property value How do I correct this?
How to create a sheet to generate Random numbers from 2 specific list of a main list range of 36 Numbers. (List A = Specific 15 numbers, List B = The remaining Numbers from these 36)
Example :
-The Main List Range is from Number 01 to 36 -The Specific random list will be 15 Numbers of these 36
List A-. The Specific 15 Numbers are: 01,02,03,10,11,12,13,20,21,22,23,30,31,32,33 List B-. Remaining Numbers : 04,05,06,07,08,09,14,15,16,17,18,19,24,25,26,27,28,29,34,35,36
So
I need to generate ONE Unique Random Numbers of List A ( 01,02,03,10,11,12,13,20,21,22,23,30,31,32,33) In Cell A1 In Cell A2 In Cell A3
And from List B, (04,05,06,07,08,09,14,15,16,17,18,19,24,25,26,27,28,29,34,35,36)
I need to do the same thing In Cell A4 Cell A5 Cell A6
It's possible to have a 6 cells with random but Unique Digits? (not repeated numbers between the 6 cell ??)
We get several sets of season tickets to various events to be distributed amongst several managers based on the mgr's headcount. So mgr1 may get 20 dates while mgr2 gets 5. All this info is calculated on Sheet1, but the only info that is important for this exercise is the mgr's names and how many dates they get. Available Dates will always be the same as Total Headcount.
Short of writing names on sheets of paper and drawing names from a hat, I would like to automate this process w/ a push of a button.
Sheet1 - this is where the managers are listed and their Headcount is calculated.
B C 10| Mgr1 Mgr2 12| 20 5
Sheet2 - this is where my ticket information is listed and will change based on different events.
A. B. C. D. 1| Date Row Seat Mgr 2| 1/1/08 H. 1-4. Mgr1 (20 times) 3| 1/1/08. I. 1-4. Mgr2 (5 times)
Ideally I would like to place a button on Sheet1 or 2 that would execute a code that looks at the range of Mgr's names and based on their hdct, inserts their name THAT many times in column D of Sheet2 like the above example.
This information should not change once it's assigned or unless the button is pushed again. The number of Mgr's names in the row on Sheet1 will change, but is never be more than 15, so the code must skip over cells that are blank if referencing, for ex. B11:P11.
I would like to use the random function on a range of select numbers. I tried randbetween() but it won't work for me since my range of numbers are not in sequence (e.g. 1,2,4,6,7,8,9,10,21). Using randbetween() might result in numbers not within my range..
I want to create a button so when you press it, it will pick a random cell and display the info. Similar to the same sort of thing as a 'tip of the day' button you see on so many websites. I have a formula that kind of works from this site, but only when you make changes on a sheet or each time you load it up. I have tried to assign it to a button/picture but with no luck!
I need to generate random numbers in the selected range. I've looked at quite a few posts on the topic of random numbers, but I can't find one that will fill the selected range with numbers.
In an earlier life I was tasked with finding a "random" method of selecting two numbers from a "1 to 20" range so that the generated numbers can be applied to an set of people who will be partnered in a golf game draw.
It is only one draw per year so I don't care if the players have previously played together in past years.
easily be modified by a "passable knowledge level" person to be able to select a mystery "9" out of 18 holes that count for scores that particular round.
(btw: this is an issue only for the 20 guys who go away once a year to play golf, the world will not collapse if I have to draw numbers out of a hat, just looking for a slightly more elegant solution and I already have a few scoring macros so my first guess (but not only possibility) is VBA)
I am working on a Random Cycle Count Generator that provides random SKU#s based on 3 separate columns of SKU listings. The user clicks a button to generate the SKU#s to cycle count for that day. What I would like to see is a date stamp in the columns next(B,D,F) to the referenced SKU listing(A,C,E) based on which SKU#s are generated. This will let me see the last date that the SKU was generated. I would also like it to automatically save after generating.
I have a column (B) of randomly generated numbers 1-14, and am using this formula range to sort in descending order and return the relevant value from column (c).
=VLOOKUP(LARGE(B3:B20,1),B3:C20,2,) to =VLOOKUP(LARGE(B3:B20,14),B3:C20,2,)
Works great, except when a number is duplicated, (E.G. 14,13,13,12,11,10,10,9,8 etc). It then returns the first value from(C) repeated, and not the value from the second and subsequent duplicated reference numbers.
I have 7 different time pickers on a userform. They work great...they are passing the time to the correct cells. The problem is that if I close the userform and then open it again, the time value goes back to 12:00:00 AM, leaving the proper time in the cell. I'm trying to change the value of the time picker to the value in the cell when I initialize the userform using the following:
If Range("IncidentTime").Value < "12:00:00 AM" Then dtpIncident_Time.Value = Range("IncidentTime").Value End If
When I run it, I get a Run-Time Error '35788, An error occurred in a call to the Windows Date and Time Picker control.
I have a userform containing a date picker control. I am trying to get the date that is selected on to a woksheet called " Bank Holiday's" in cell O21.I have placed the following code in to a button used to close the form.
Private Sub CommandButton1_Click()
Sheets("Bank Holiday's").Select Range("O21").Select Range("O21") = UserForm17.DTPicker1.Value Unload Me End Sub
Is there an easy way to get a date picker on a cell, example i want a date picker in cell C4. I know there is a code you write to get this to work and create some kinda user form, but just wondering if there is an easier way.
On the attachment i have a userform which pops up when cell B2 is selected. It is a month view from the additional controls on the control toolbox. I've also added a couple of text boxes with spin buttons.
A few amendments i want to make to it are:
User form pops up next cell B2
'Enter button' enters date and time into cell B2
Spin buttons increase/decrease hour field in incremnts of 1 and minutes field in increments of 5
I'm trying to use the Date/Time ActiveX control in Excel 2000 and it is giving me problems. I am attempting to use this control contained directly on a worksheet (not contained on a separate form). My problem is that each time I start the workbook, the date/time control resizes itself to have an extremely large height. I set the control's height at 18 but upon loading it shows the height as about 5x that value. However, the properties of the control still show it listed with a height of 18? No matter what I do, I cannot seem to find a way to have the control maintain its initial height. I've tried this in several different workbooks, and it does the same everytime.
I've coded a macro that can randomly sample out rows of data from a sheet. This macro is used to sample out certain rows from a master sheet full of data (which has 48 columns) based on user names (a column titled LAST_UPDATE_NAME). For Example (ref. wkb attached), if for 5 users named Alastor, Catherine, Emma, Julie and Victor for whom i've to choose data from the Dump sheet.
I need to design a module in which if i input the no. of samples to be chosen against each name, then that many number of rows has to be chosen for that particular name and copied to a new sheet (probably such sheets can be renamed with the usernames). Also i want to consolidate the copied data from the multiple sheets and consolidate them to one sheet.
I have random comments in a column of cells of which I'm searching for a specific string of characters that may be contained in each cell. I want to pull 2 pieces of data from this specific string and place the data in 2 other cells in the same row.
Sample comments in cell 'N1':
..... blah, Appt: Friday; 12/4; night drop off. blah, blah.... Sample comments in cell 'N2' (and so on and so on):
The specific string in the above examples will always begin with:
APPT: Then the key elements found directly after the 'APPT:' are:
Thurs; 12/3; 12:30PM.
(which are the)
DAY; DATE; TIME. These elements will be always separated by the semi-colon ';' and the string will always end with the period '.'
I need a pair of formulas to be in col 'J' & 'K' to extract the DATE and place it in column 'J' and the TIME and place in column 'K', both in each same rows.
So, from the 2 above samples I would need the following:
in Cells: J1 - 12/4 ....... K1 - night drop off
J2 - 12/3 ....... K2 - 12:30PM
I've been trying to come up with a formula using a combination of FIND() & MID(),
How should i reformat the date and time picker? at this moments, it shows the date in the format of mm/dd/yyyy but the format that i want is dd/mm/yyyy.
I have userform In that Twotextbox Need to be Pickdate from Popupcalender..while placing cursor on Textbox1 and textbox2 it popup shows Pickupcalender.... I tried with different code still failed
Go to sheet Repor Wizard Form ,Click Report filter & Export cmd button
I am trying to create a multiple file picker. The code is below.
I want to open the first file of lets say 5 selected files, do some autofilter task, copy data from that file, paste it in another workbook and close it. Open second file, do some autofilter task, copy data from that file, paste it in below the first file pasted data in another workbook and close it... and File 3... and so on.
It works for one file, the code for copying pasting is not yet added. I think I can manage that. But how I return to the file picker function after it opens the first file.
I'm building a userform excel application and am using the MS date/time picker control. I've run into the familiar "computer doesn't have OCX" problem and want to avoid using a custom OCX.
I was thinking of just making my own control instead. Has anyone made one in VBA? I found some VB examples which I could port over, but they use a lot of api calls. For reliability, I'd like to keep this as simple as possible though.
I am trying to use the Date and Time Picker 6.0 and I have add it to the userform and named it DateofContact.
When I play the userform I get a error stating:
"Compile Error-Method or Data member not found"
Below I have added the code and it shows in red where the problem is.
Private Sub UserForm_Activate()
PSA.Text = Cells(lCurrentRow, 2).Value cboTypeofContact.Text = Cells(lCurrentRow, 3).Value DateofContact.Text = Cells(lCurrentRow, 4).Value TimeofContact.Text = Cells(lCurrentRow, 5).Value End Sub I am not sure what to put in its place.
