Time Picker
Aug 5, 2005
I have 7 different time pickers on a userform. They work great...they are passing the time to the correct cells. The problem is that if I close the userform and then open it again, the time value goes back to 12:00:00 AM, leaving the proper time in the cell. I'm trying to change the value of the time picker to the value in the cell when I initialize the userform using the following:
If Range("IncidentTime").Value < "12:00:00 AM" Then
dtpIncident_Time.Value = Range("IncidentTime").Value
End If
When I run it, I get a Run-Time Error '35788, An error occurred in a call to the Windows Date and Time Picker control.
View 9 Replies
ADVERTISEMENT
Aug 24, 2009
On the attachment i have a userform which pops up when cell B2 is selected. It is a month view from the additional controls on the control toolbox. I've also added a couple of text boxes with spin buttons.
A few amendments i want to make to it are:
User form pops up next cell B2
'Enter button' enters date and time into cell B2
Spin buttons increase/decrease hour field in incremnts of 1 and minutes field in increments of 5
View 14 Replies
View Related
Jan 7, 2004
I'm trying to use the Date/Time ActiveX control in Excel 2000 and it is giving me problems. I am attempting to use this control contained directly on a worksheet (not contained on a separate form). My problem is that each time I start the workbook, the date/time control resizes itself to have an extremely large height. I set the control's height at 18 but upon loading it shows the height as about 5x that value. However, the properties of the control still show it listed with a height of 18? No matter what I do, I cannot seem to find a way to have the control maintain its initial height. I've tried this in several different workbooks, and it does the same everytime.
View 9 Replies
View Related
Dec 26, 2012
How should i reformat the date and time picker? at this moments, it shows the date in the format of mm/dd/yyyy but the format that i want is dd/mm/yyyy.
View 10 Replies
View Related
Dec 24, 2008
I am trying to use the Date and Time Picker 6.0 and I have add it to the userform and named it DateofContact.
When I play the userform I get a error stating:
"Compile Error-Method or Data member not found"
Below I have added the code and it shows in red where the problem is.
Private Sub UserForm_Activate()
PSA.Text = Cells(lCurrentRow, 2).Value
cboTypeofContact.Text = Cells(lCurrentRow, 3).Value
DateofContact.Text = Cells(lCurrentRow, 4).Value
TimeofContact.Text = Cells(lCurrentRow, 5).Value
End Sub
I am not sure what to put in its place.
View 9 Replies
View Related
Feb 28, 2003
I recently reformatted my hard drive and reinstalled my software. Now I don't seem to have the Date and Time Picker Control (among others) that I used to.
I did a thourough install of Microsoft Office 2000 Professional, and switched from Windows 98SE to Windows 2000 Professional. Isn't that control standard in such an installation? If its not, where can I get it?
View 9 Replies
View Related
May 14, 2006
i have just discovered the Microsoft date and time picker. at the moment i have a text box on my userform into which i put the date.can i use code to transfer the date to the text box or do i use the date picker instead of the textbox. if i used the date picker what is the code for the date picker
View 2 Replies
View Related
Aug 29, 2007
I have some excel tools developed in Excel 2003 which uses the date and time picker control (DtPicker). When I open my files in Excel 2007 the DtPicker is missing and the change_event will not load the calendar. I cannot find and activate the datepicker in the Reference base.
View 6 Replies
View Related
May 6, 2013
I am using the below code to pick folder to get that name in text box. But when I click cancel in folder picker dialog box it disappears and again appears. Then again I have to click cancel. Am I using "If .Show = False Then Exit Sub" in correct way?
VB:
Private Sub DirListText_DblClick(ByVal Cancel As MSForms.ReturnBoolean)
Dim FolderPath As String
With Application.FileDialog(msoFileDialogFolderPicker)
.Show
If .Show = False Then Exit Sub
DirListText.Text = .SelectedItems(1)
End With
End Sub
How should I work on this?
View 1 Replies
View Related
May 13, 2005
I'm trying to use the Date Time Picker control as a time picker and only want hours and minutes to show. Can this be done with its custom format property (Example)? The usual number formatting string doesn't seem to work.
View 6 Replies
View Related
Nov 21, 2013
I just installed Office 2013 Pro. In my Office 2010 Additional Controls toolbox, the control toolbox has a Date and Time Picker(DTPicker1) . I cannot find it in the Additional Controls toolbox in Excel 2013. I certainly hope they did not choose to not make it available in Excel 2013 - this is an extremely important control for my Excel spreadsheets as it allows inputting a date range on a userform with DTPicker1 and DTPicker2 and generating reports using VBA in conjunction with Autofiltering code on a Generate Report button.
View 8 Replies
View Related
Apr 13, 2013
I want a drop down calender to choose date from and found that i can use More Controls> "microsoft Date and Time Picker 6.0 (SP4)" for excel 2007 but it doesn't work with other excel and shows a "x" not recognised in some other machines.
View 1 Replies
View Related
Apr 23, 2013
I am using the Microsoft Date and Time Picker Control 6.0 (SP4) from the more controls option on the developer Ribbon. The issue I have is when I protect the sheet I lose the functionality?
I have ranges selected as editable by user when the protect is on - this includes the linked cell to the date picker but it still doesn't work.
View 1 Replies
View Related
Jun 17, 2013
I have just added two date and time picker controls to my spread sheet to allow the user to select the date range.
They are linked to cells C9 & C10.
The problem is that the formula I using to check whether the first selection pre-dates the second has stopped calculating correctly when using the date and time pricker controls.
The formula is:
=IF(C9>C10,"Error","OK")
I have checked it on the same sheet by just typing the dates in and it works fine...I have tried formatting cells C9 & C10 to short date, general, text, number but it still does not calculate correctly.
View 5 Replies
View Related
Nov 7, 2013
I am trying to add a calendar picker to Excel 2010. Everything I read online says that it is possible, you just need to use the ActiveX control "Microsoft Date and Time Picker Control 6.0", and that it should be listed under Developer Tab -> Insert -> More Controls ->... But it's not listed.
I also tried downloading the Microsoft Windows Common Controls-2 6.0, but when I tried to add it to Excel using "Register Custom...", it says "Cannot register this control".
Why this control is missing? and I can't add it?
View 1 Replies
View Related
Jun 14, 2013
I was trying to use this guide to add a date picker in:
[URL]
and noticed that the date picker does not appear in my active x controls list.
I am definitely on Excel 2010 so it should be there right?
View 1 Replies
View Related
Feb 2, 2012
I inserted the Date & Time picker Control into my worksheet. I have it linked to a cell. When I change the date, the new date goes into the cell, but it does not appear to be a "date" . The date formulas that use that cell do not evaluate properly. It looks different than when I type a date directly in to the cell (it is left justified). I tried formatting the cell as a date and the format property of the control is set to shortDate.
View 2 Replies
View Related
Sep 4, 2009
I have a userform containing a date picker control. I am trying to get the date that is selected on to a woksheet called " Bank Holiday's" in cell O21.I have placed the following code in to a button used to close the form.
Private Sub CommandButton1_Click()
Sheets("Bank Holiday's").Select
Range("O21").Select
Range("O21") = UserForm17.DTPicker1.Value
Unload Me
End Sub
View 9 Replies
View Related
Oct 16, 2008
Is there an easy way to get a date picker on a cell, example i want a date picker in cell C4. I know there is a code you write to get this to work and create some kinda user form, but just wondering if there is an easier way.
View 3 Replies
View Related
Aug 13, 2003
when a date must be selected, you can do it through a button that opens up a little calendar page on which you just click on the date selected.
Is there anything similar in Excel Office XP, or is this asking too much??
View 9 Replies
View Related
Jun 6, 2014
I have userform In that Twotextbox Need to be Pickdate from Popupcalender..while placing cursor on Textbox1 and textbox2 it popup shows Pickupcalender.... I tried with different code still failed
Go to sheet Repor Wizard Form ,Click Report filter & Export cmd button
find the attachment
View 4 Replies
View Related
Mar 6, 2014
I am trying to create a multiple file picker. The code is below.
I want to open the first file of lets say 5 selected files, do some autofilter task, copy data from that file, paste it in another workbook and close it. Open second file, do some autofilter task, copy data from that file, paste it in below the first file pasted data in another workbook and close it... and File 3... and so on.
It works for one file, the code for copying pasting is not yet added. I think I can manage that. But how I return to the file picker function after it opens the first file.
View 1 Replies
View Related
Oct 15, 2010
I need to put date picker in excel 2010, the earlier doen't work.
View 5 Replies
View Related
Jul 23, 2013
I am looking to add a date picker to sheet where I am tracking dates like having a month calendar drop down.
View 9 Replies
View Related
Aug 28, 2013
I have range of data where i want to randomly select a value in that range but what i want is to visually see it activating random cells and then finally select 1 at the end. Its just more of a nice visual effect and then select a value/cell.
This code just goes through all the cells but not exactly what i want to do.
Code:
Sub test()
Dim ws As Worksheet
Dim cell As Range
Set ws = Sheets("Sheet1")
For Each cell In ws.Range("Data")
cell.Activate
Next cell
End Sub
View 5 Replies
View Related
Mar 29, 2007
I'm building a userform excel application and am using the MS date/time picker control. I've run into the familiar "computer doesn't have OCX" problem and want to avoid using a custom OCX.
I was thinking of just making my own control instead. Has anyone made one in VBA? I found some VB examples which I could port over, but they use a lot of api calls. For reliability, I'd like to keep this as simple as possible though.
View 9 Replies
View Related
Feb 17, 2014
i built a form and in the date section i have a date picker and once i fill the form out i have a button that saves all the data on another sheet like a database, what do i need to do to make it were it adds the date to the database itll add all the other data but cant seem to figure out how to make the date display
View 3 Replies
View Related
Oct 14, 2013
I just want to add it to my excel 2010. How can I add a date picker in my spreadsheet, when the cell contains a date format????
View 14 Replies
View Related
Feb 8, 2010
I would like to create a spreadsheet that when a selected number of cells are set to "yes" then a lookup to a small table should then copy 3 columns of text at the side of that table, if the criteria is met with a "1". If either f2, f3 or F4 = "Yes" then look up A9:c16 and if there is a "1" in respective column then copy all text to the right in columns D, E & F to "result" work sheet. I am trying to create auto copy of selected data without the use of a filter, by pressing a cell / button.
View 4 Replies
View Related
Nov 27, 2007
I am using the following code to allow the user to select files to open. I have realised that you can create multiple filters with the msoFileDialogFilePicker command, which is very useful, since the program initalliy takes multiple text files, loads them into a workbook as seperate sheets and then saves the workbook as an excel file. Therefore I would like the user to be able to select the text files to load but also to be able to check if the corresponding excel file already exists and if so to be able to directly open this rather than have to create a new file from the text files. Therefore my question is: Is there a way to be able to tell which filter was in use when the file was selected?
Set fd = Application.FileDialog(msoFileDialogFilePicker)
With fd
.AllowMultiSelect = True
.Filters.Clear
.Filters.Add "Excel Files", "*.xls"
.Filters.Add "Text Files", "*.txt"
.Show
' olWin.Activate
A = 1 ...........
View 2 Replies
View Related
