I am reading the xml files like below:
[Code] ......
When a file is read/loaded in DOM, I want to search whether my provided value(Not the key) is present in the file OR not.
If it is present then I want to update it with new value. This should be done for all of the files present in the folder.
I was trying to drag a node onto a worksheet and for that node to remain in the treeview control.
I have found out that if I hold the CTRL key then the node remains on the treeview.
Does anyone know how I can implement this action in my code so I don't have to keep pressing the control key?
I am using a TreeView control and need to determine if the user clicked on the Image or the Label of a node. The Hittest function can return either a TreeViewHitTestInfo object or a node. By default it returns the node. I'm not quite sure how to trigger the return of a TreeViewHittestInfo object, but at the moment I'm even struggling to make VBA aware of that class. A simple statement like
Dim info As TreeViewHitTestInfo
returns an error saying that TreeViewHitTestInfo is not defined.
I'm trying to open a file on a network drive...but I'm getting the following error message when it opens: "This file may be read-only, or you may be trying to access a read-only location. Or the server the document is stored on may not be responding." Now, the file itself has no rights restrictions and is not read only. It doesn't appear to be locked.
Now, there are other Excel files in the same directory which I could open fine; however, the Excel documents having the above problem all have a little black icon "appears to be a padlock" (image attached) at the bottom left hand side of the Excel file icon. I tried the following:
- Renaming
- Converting to a different file format (didn't work, it won't let me)
- Opening in notepad...etc doesn't work.
This file is dated back in 2004...do you think it's corrupt? Is there anything i can do to open or recover this?
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx‎
I have two ranges of numbers stored as text on two different sheets.
The first one is from product code and the second is from product category.
The problem is both ranges are of different lengths and I have to find out if a product from the right is part of a particular product category. Even if the length is different the first digits are indicative of the belonging of a code. For example 1234 and 12345 are “family”-their first 4 digits match.
Just to give you an example of what is desired:
Category____ Code
2200 ________22002
2323________ 232347
So, the loop should do the following:Compare the first string from the “Category” column to each and every entry on the right, if a match exists (we have no match here for 2200) write “ok” next to it.
Next trim one digit from the right from every string in the “Code” column.
Compare same first string from the “Category” column to each trimmed string from “Code” column (here we should have a match 2200=2200)
Write “ok” next to it
Now the loop goes to the second string from “Category” column and for this one we will have to trim 2 digits from the right of each string in “Code” column to achieve the result (2323=2323) and so on.
i m wishing to make a ss available to all but only ready only format 2 people need access to ammend the data and spreadsheet.
View 2 Replies View RelatedI've created an add-in. When I try to update the coding in the add-in, Excel reports that the add-in is read only and prompts me to choose another name for it. However, it is not currently selected in my Tools -> Add-ins... window.
View 9 Replies View RelatedSimply stated:
Range("A5") = Qty
Range("A6") = Cost
Range("A7") = Cost * Qty
In the UserForm:
TextBox1 fills Qty range
TextBox2 fills Cost range
I'd like to have TextBox3 to show the result on Range("A7"). This box would not be enabled, therefore is not clickable or Tab accessible.
I tried
Private Sub TextBox3_Change()
TextBox3.Value = CStr(Range("A7").Value)
TextBox3.Text = Format(TextBox3.Text, "Currency")
End Sub
but that does not do it.
Lately I've been learning how to pluck data right from a web page:
for instance,
cageNum = IE.document.getElementById("txtCage").Value
will read the info right out of the txtCage textbox at the page where my IE object is.
Now I'd like to read a table into excel. How is that done?
I used to read *.txt file into C/C++ program?
Now from Yahoo downloading stock prices, they are in EXCEL *.csv format. How can read them into C/C++ program?
I've got an excel sheet from a guy at work who decided to lock the entire document down so I can't do anything with it. Virtually all the ribbon options are greyed out, there isn't anything locking it in the code, I've tried checking the save as "read-only" option and it's not there. How I can actually save this is editable? I've looked in windows explorer and it's not read-only in there either. I tried save-as and even tried making it an XLS instead of an XLSM and it still won't let me edit it
View 1 Replies View RelatedThe xls file I have written is used by multiple users at the same time. None of them can actually change the file - it opens data files and imports the data it needs then writes back any changes to the data to those files.
So the "read-only" option that my users see is of no importance to them - can this be bypassed somehow?
I have a text file that I want to read the data into a sheet and split and store into columns.
The format of the textfile as follows (Only two records will contain 200 with line break to seperate):
Atom "file" contains: C:B_200801142021_VIDEO_BOYS_EVENTS_FIRSTBIRTHDAY@Video Title 1.mp4
Atom "©nam" contains: Video Title 1
Atom "purd" contains: 200801142021
Atom "keyw" contains: VIDEO_BOYS_FIRSTBIRTHDAY
File "F_©nam" contains: Video Title 1
File "F_purd" contains: 200801142021
File "F_keyw" contains: VIDEO_BOYS_FIRSTBIRTHDAY
Raw data:
1 acct01 John Doe 10
2 acct01 Hits 20
2 acct01 Runs 05
Goal:
1 acct01 John Doe 10 20 05
For a couple of reasons I have had to take a workbook off of a local machine and place it on the network so others can access it. I cannot share the workbook because of the macro's and protection on it. At any one time only one person should have full control of workbook. The others only need read only access. I won't go into the whole deal but I was hoping there was a way on startup to detect if the workbook is in read only mode or not (Other than the basic notifications and indications that excel gives as many users either ignore or do not understand them). If so I would like a big message to popup stating this fact to the user and also if possible show them who currently has it open. Lastly, they would have a cancel workbook open option until they get the other user to exit.
View 2 Replies View RelatedIs that possible that I can make an excel file as a read only through code... and if needed should be opened by giving password ?
View 6 Replies View RelatedI have a formula that puts a date into a format I want to read date from a data base.
[Code] ..........
Output is correct = '17-03-2014' if the date is greater than or equals to the 10th but if its the 1st for example I get '1-03-2014' which is wrong as I need the zero to count the date properly. I tried a Left formula on a date field to bring in the first 2 digits but because its a date it returns for example 41 instead of 17 if its the 17th. I was going to do a Left(Text type of formula and place it into an if statement but that didnt work.
I know how to pull an entire text file
into an Excel Spreadsheet, but I only want specific information from
the text file not the entire text file.
What I have is about 25 text files stored in a folder, let's say
C: est.
Each file is named by a property address as follows:
209 MAIN ST.txt
213 MAIN ST.txt
111 ELM ST.txt
2356 WOOD AVE.txt
On the 11th row of each file is as follows:
Property Address:209 MAIN ST
On the 31st row of each file is as follows:
Total Value:30500
What I would like to do is read each file located in the "C: est
folder and write a record (row) into a single Excel Spreadsheet for
each property. I would like the Excel Spreadsheet to look as follows
once completed. Note the 1st row below is a header row that needs to
be generated by the code.
Property AddressTotal Value
209 MAIN ST 30500
213 MAIN ST 60700
111 ELM ST 20400
2356 WOOD AVE 20900
Can I read a header list (in a spreadsheet, text file, or hard coded in
the code) which I would prefer the spreadsheet or text file method,
write the header row in A1 then B1. Next read the 25 text files and
search based on the header info written above (Property Address & Total
Value) and write the appropriate to the single spreadsheet. The 11th
row of the First text file value written in cell A2, then read the 31st
row of the First text file write the value in cell B2, then loop to the
Second text file and values from The 11th row of the Second text file
value written in cell A3, then read the 31st row of the Second text
file write the value in cell B3, so on and so forth until the last text
file is read and the last record is written.
I have a set of Hex Code a total of 4 Sets :
A4EC 9ACF 4A02 044E
1. What i need to do is Read the 1st Character in the Hex Code which say A now.
2. Now I need to find if there is another A in this Hex Code. If yes - e.g
A4EC 9A - I need to find the difference between A-A. How many characters are in between the 2 A-A. So for this I have A 4EC9 A so the difference is 4.
2.1 - Another Senario of "A" - A 4EC9ACF4 A the difference is 8 characters
3. Next we will move on to the next Letter which is 4 and do our search.
The key is i only want to record those Hex code which have a difference of 4,8,10,12 differences.
So for that above example I should be able to record the following :
A 4EC9 A == 4 letter difference
4 A020 4 == 4 letter difference
A 4EC9ACF4 A == 8 letter difference
4 EC9ACF4A020 4 == 10 letter difference
E C9ACF4A02044 E == 12 letter difference
I took two weeks perfecting an Excel file and was writing them to disc just now to transport and use on other machines. I opened the file to add instructions and the files are now read only? Propteries show read only on the written files but not on the originals???
View 4 Replies View RelatedI've been trying to use IF OR and CONCATENATE to read 4 cells and give me a list of parts needed based on the data loaded in the 4 cells. I attached an example showing.
View 2 Replies View RelatedI am trying to get a SUM function to recognise values within a range of cells, that are immediately followed by a *. i.e. 34*
For each range i need to count the total number of inputs, count the number of starred inputs & add up all the values entered.
Currently COUNT doesn't recognise starred values, COUNTIF is set to count only starred values, and SUM wont recognise the value of the starred values.
Is there a way to only read the number element of an input - there are only integer values & starred integer values. The starred inputs are also conditionally formatted. If there is a way would it then affect the COUNT/COUNTIF element?
Pedro
I have a macro which searches for the latest date down a column and across particular rows. Extract of the code is shown below:
View 11 Replies View Related=TEXT(B13," dd mmm yy") Formula in C13,I would like to be a number not text
View 7 Replies View RelatedI'm trying to find total gross commission within a spreadsheet, where gross commission found in Deals column Q. Columns T & U indicate with an "X" whether the deal was associated with referrals and such.
=SUMIFS(Deals!$Q$2:$Q$500, Deals!$T$2:$T$500, "x",Deals!$C$2:$C$500,">=1/1/2005",Deals!$C$2:$C$500,"<1/1/2006")
=SUMIFS(Deals!$Q$2:$Q$500, Deals!$U$2:$U$500, "x",Deals!$C$2:$C$500,">=1/1/2005",Deals!$C$2:$C$500,"<1/1/2006")
But now I need to sumif Q2:Q500 excluding rows where "X appears in either T or U, or both, to indicated complete self-generated deals.
I am running a call centre with 20 users at peak time. I have 1 user who will always have a master workbook open and saving throughout the day. The remainder of the users during calls will need to open this file as read-only to simply view the latest saved version.
This works however sometimes is takes a over a minute for the file to download from the server for the read only box to appear. I was wondering if there was a way for the other users to view it in a simpler and quicker way?
Also issues with the 1 user saving the file which others have it open as read only?
I recently added formulas to the attached worksheet where a cell is linked to a "true" and a "false" which are linked to check boxes. When "true" is activated the cell with the formula will = "HOLD" and when "false" is activated the same cell will ="RELEASE". Now, when i saved this worksheet and tried to reopen it a dialog box popped up that said "the content is not readable.... excel will try to recover the content" (or something like that) so when i click "yes" to the dialog box then the sheet opens fine , however, when i save the sheet the same box pops up? Maybe there is something wrong with my formula because before i inserted the formula to the sheet the sheet worked fine.
See attached TEST1.xlsx
Is it possible to make Columns Read only? So not one can type or edit. Not all columns just the ones I need
B,C,D,I,J
I have tried the following code, but doesn't work unless I protect the sheet:
Range("A1:A4").Select
Selection.Locked = True
Selection.FormulaHidden = False
If I protect the sheet, then it works fine, but how can I make a cell read only
WITHOUT protecting the sheet?