Fixing a macro that i recorded in order to generate a pivot table on the same sheet and the same exact location every time. it seems that the macro fails every time i try to run and i'm thinking it has to do with the table reference. Again i want the table in the same sheet and the same location every time i run the macro. this is the recorded code so far.
View 1 Replies
Can record the all those actions which we need to do on a regular basis. In my work i have to create the pivot table to a data which gets changed every day but the data sequence remains the same.
I have tried to record the macro for the pivot table but when i tried to run the macro again then the below error message comes.
"run time error 5" "Invalid procedure call or argument" when i click on debug then the below macro program is highlighted in yellow color.
I got this code from another old old thread, is there a way that the pivot is already setup like column A is already in Row Labels, B is for Column Labels and C to Values.
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase,
SourceData:= _[a1].CurrentRegion.Address).CreatePivotTable
TableDestination:= _"", TableName:="PivotTable1"ActiveSheet.PivotTableWizard
[Code] ......
I have a data table that contains 180 dates e.g. 9/30/06, 10/31/06 etc. When I'm creating the pivot table via a macro I'd like to have (2) parameters to enter at run time, those being Beginning Date and Ending Date.
View 9 Replies View RelatedI used the macro recorder to create a pivot table, but to verfity that it works.
I get a "Add fields method of Pivot Table class failed"..
and this was highlighted:
ActiveSheet.PivotTables("PivotTable2").AddFields RowFields:=Array("Warehouse" _
, "Product", "Description", "Data")
I have recorded a macro to create a pivot table. I thought I had it so that it would create the pivot from the active worksheet only. But looking at the code, it is picking up the sheet name from the one I recorded it from
Code:
Sub SalPiv()
'
' SalPiv Macro
' Macro recorded 20/06/2012 by imccormick
[Code].....
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
View 14 Replies View RelatedThe "Sum" sheet can change its number of rows. The pivot table is based on it. I'm having trouble with the SourceData portion of the code in my macro ....
View 9 Replies View RelatedI have a pivot table that I created and now I want to use the same pivot cache to create another pivot table instance on a different worksheet. how can I do that? My first worksheet gets saved as "OO By buyer" and now I want to create a new worksheet and drop the next pivot there.
View 1 Replies View RelatedRecently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.
Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)
1) I want to create a pivot table in a new tab that has both the prefix “ENG” and the date of creation as the new name of the tab every time a new table is required, using the example headers highlighted in the attached file.
2) Then if possible format the table as in the example, i.e. bordered cells for all the data and the dates only aligned to the right. Example in tab “Eng 01 05 09”
No 1 is the most import question I would like help on. Formatting is not crucial. This is only to make the table easier on the “eye of the beholder”, I am writing this spreadsheet for people who have less knowledge than myself and would like to keep it as simple as possible, (run a macro and get the results).
I regularly build a pivot table using VBA. I now want to group countries into regions within the pivot table, and I want to automate that using vba.
For simplicity, assume I have the countries Germany, Netherlands, Belgium, Luxembourg, Norway and Sweden; and I want to create the Groups BeNeLux and Scandinavia. (In reality, I have 150 countries, one group of 10 countries, 2 countries I want to show individually, and the rest of the world I want to group together)
I know I could select the cells using something like cells(d2:f2).group, but that seems wrong....
I have attached a file showing how far I can get with vba and where i want to get.
I have also tried things like ".DataRange.cells(2).group by:=3" but that never led to anything....
grouping reqs.xls
I'm trying to create what is essentially a report card for our staff. I have all the data in a pivot table and then I am using 'GETPIVOTDATA's in the report template to extract the information, linking the sheets via a cell that contains the staff members name. Easy enough. However for reasons of efficiency and practicality I would like to be able to select the names from a drop down list on the sheet rather than having to type it in manually or maintaining a separate sheet for everyone. The operators will change from month to month and there are approximately 90 staff at any given point in time that will need to be reported on so it really needs to be sourced from the pivot data.
View 7 Replies View RelatedFor example...
I have data for monday.. Tueday ..Wednesday as individual excel
All the excel have same column names and dynamic values.
Is there a way i can create one pivot with different excel as source
Another question about pivot tables. In Excel it is possible to show different kinds of information in a pivot table like sum, total, min, max, average and so on. I want to create my own formulas in my pivots. Is this possible and if so how?
View 7 Replies View RelatedI have two questions about dealing with formulas in pivot tables and how to make them dynamic. First let me give you some further background.
My database countains the following variables: Country, Company, Period, Product, Category and Sales. Out of this database i created a pivottable which sums the total sales amount for each company in every period. Further selection on country and category is possible in this pivot table. See my attached file!
I want to express the sales of each company as a percentage of the total sales in that period. For example for company A in period 1 their total sales was (929/3172) 29,3% of the total market sales. Which formula do i have to use in my pivot table to express company's market shares?
Further my pivot table can be specified more detailed by country and category. I want to be able to select on country and category in such a way that the company sales are still expressed as a percentage of the market sales. In other words how can i make my pivot table dynamic?
I have a pivot table without report filter and I set insert page break after one of my selected row labels.
I also would like when I print, these row Labels become the title of these pages at the same time.
Actual File : Untitled.png
However I would like when I click on print or save as pdf will print all pages as one file and each Center that I have set page break for, in separate page and add that specific center as its title:
Attachments for more details:
test_Page_1.jpg
test_Page_2.jpg
test_Page_3.jpg
test_Page_4.jpg
I am currently trying to create a multiple pivot tables in one sheet. The current formula to make a single pivot table that i am using is
Formula:
[Code]....
The current problem i have is... i need to Dim PT01 as pivottable, Dim PT02 as pivottable, Dim PT03 as pivottable and so on.... Repetition is not good!
and secondly,the total pivot table is not constant each week. During busy week, i need to create 8 pivot table and in a slow week, it can go down to 5.
See below of my current formula...
[Code] ....
How to create pivot table in a better way?
I'm getting a 1004 run-time error when creating a pivot table.
I believe this happens because I'm creating it in a hidden sheet. When I unhide it no errors occur.
I have the following code that will open each file in a folder and run code on it. I'm trying to write code that will create a pivot table on each of the opned files...but cannot get past opening the file...
So I had built the vba code into a specific workbook so I could just drop that workbook into any folder I wanted to run code on files to and depending on the name of the file it would run different type of code. The problem has something to do with using "activesheet" for the pivot table wizard. It just doesn't like it and gives me a application 1004 error.
any way I can modify the activesheet so it will make a pivot of the newly opened file? I think what it is trying to do is make a pivot of the blank workbook that the code resides in
Sub filelooper()
MyDir = ActiveWorkbook.Path ' current path
Dim MyFile As String
[Code].....
I'm trying to create a pivot in vba. I can record what I have done but if I run that recorded code, it returns an error "Invalid call procedure or argument".
Code:
ActiveSheet.PivotTableWizard SourceType:=xlDatabase, _
SourceData:=Sheets("Raw Data").Range("A1:AG" & Z), _
TableDestination:=Range("A3"), _
[Code].....
I have 16 different workbooks for different regions of my company. Each workbook has one worksheet (sheet named each region name), and all workbooks are formatted same regarding column names. Ultimately, I would like to combine all workbooks into one summary workbook where I can build a pivot table and pull out various data. Do you think this method is the best way to do what I am trying to do? I am very novice when it comes to VBA. I have written the code below, however, it is not working.
Code:
Sub GetSheets()
Path = "C:UsersDanielleDesktopWorksheets"
Filename = Dir(Path & "*.xls")
Do While Filename ""
Workbooks.Open Filename:=Path & Filename, ReadOnly:=True
For Each Sheet In ActiveWorkbook.Sheets
Sheet.Copy After:=ThisWorkbook.Sheets(1)
Next Sheet
Workbooks(Filename).Close
Filename = Dir()
Loop
End Sub
I would like to combine 2 tabs into one spreadsheet. I was not able to do so, because it exceeds the max rows allowed in excel. I have installed powerpivots but not sure how to combine data using powerpivots.
View 3 Replies View RelatedGiven a pivot table, is there any way that I can determine the source data that was used to create the pivot table?
I suspect that the pivot table was created using only part of the data, but I'm not sure.
I created a union query in Access to join two tables (Projections and Actual Sales). The query produces the results I want. I need to create a pivot table in Excel using the union query as the source. When I pull up the data import function in Excel, the union query does not appear. Do I need to do something else? I have tried to create a select query where I select all from the union query and I can find that fine.
When I use this query to create the pivot table the results end up all zeros when I try to sum the values. It creates some crazy results when I show it as count of also.
I can provide the data in either the Access database or Excel spreadsheet.
I get a "Object variable not set" error when creating a Pivot Table from a cache. I want the destination to be in a different sheet in the workbook. I set the new worksheet as: Set WSD = Worksheets.Add and I reference WSD.Cells(2,FinalCol +2) in the destination field of the CreatePivotTable method. I use the code from the Excel 2010 VBA book I got last week.
View 9 Replies View RelatedI have written two macros to create a pivot table that displays data by month. I created a column that is a flag that indicates if the if an instance occurred in the last 4 months(later used as a filter). The issue is how to handle defining the last 4 months. If the current date is prior to the 16th, I want to define the last 4 months as not including the current month. If it is after the 15th, I want define the last 4 months as including the current month. Currently I have two different macros and I make the decision on which to run. I would like the macro to handle this for me. Below is the cell formula that I use to set the flag if it is in the first half of the month.
ActiveCell.FormulaR1C1 = "=IF(RC[-3]>EOMONTH(TODAY(),-5)+1,1,0)"
I'm looking for an example of creating a pivot table based on an ADO Access Recordset.
I understand I can use MS Query - which I am, but looking to see if an alternative exists. A table I am inetrested in currently has 400,000 records I would like to retrieve and pivot.
I have a Pivot table that pulls the Avg of two fields for two months, see example below.
Avg Gross $ Avg Net $
Jan 2014 20 10
Feb 2014 30 20
sample 1.png
See sample attached.
The Avg Gross and Net is shown by going into the values and selecting "Summarized value by -> Average".
On the right side of this Pivot, what I wanted to do is to show a Avg Gross to Net $ in this pivot. So the formula should take "Avg Gross $" - "Avg Net $" = Avg Gross to Net $.
I am having trouble calculting this new field in the pivot table using a calculated field because the Calculated field pulls the variables from the existing field list and there isn't a field called "Avg Gross/Net"....I need to find a way to calculate the Avg Gross to Net into the Pivot table so I can pull a pivot graph out of it.
how to create a pivot table that does not skip through blank data cells. I have a pivot table with data for several dates, but not every date has a data point. I would want the pivot table to show all the dates with the blanks, rather than skip through the days with no data.
View 7 Replies View Related
