how to create a pivot table that does not skip through blank data cells. I have a pivot table with data for several dates, but not every date has a data point. I would want the pivot table to show all the dates with the blanks, rather than skip through the days with no data.
View 7 RepliesI have a column of data that I want to display as a chart. However, there are some blank cells in the column. When I use a simple line chart, the chart drops the line all the way down to zero for the blank cells. If the blank cell is B4 in column B, is it possible to make excel ignore that cell and connect B3 and B5 with a straight line?
View 6 Replies View RelatedHow do I make sure that my pivot table has no blank cells?
For instance if I have a store with more then 1 barcode of sales against it it will give me the store once at the top left cell of the first column and then the list of barcodes in the column next to it.
I want the store name to appear next to each barcode. Pivot tables make vlookups a pain in the arse to do and I'm sick of having to get around that by copying the pivot table into a blank sheet as values then using the autofilter to filter the blanks and use an ='theabovecell' formula to fill the blanks for all of the columns one by one.
I have a pivot table that compares year-on-year sales data for accounts. If an account didn't have sales for the earlier year, the custom calculation errors #DIV/0! which I can show as at the account level. Problem is at the subtotal levels, I also get the error when I should be getting a value for the group. The error for the one account is affecting my subtotal.
Is there a way I can Show Empty Cells as a VALUE instead of TEXT of say... 0.001 so I can eliminate the error messages?
why it is counting every blank cell as 1. I have tried to copy my data as paste as special value and run pivot again but I get the same result. For you visual consideration, I've attached a sample spreadsheet.
View 6 Replies View RelatedI have a pivot table which pulls data from a table in same worksheet
There are 9 rows of data in the table
If I fill all 9 rows then the pivot table shows all 9 rows as expected.
Any less than 9 rows, for example if only 4 rows are poluated, the pivot table shows 4 rows plus one empty row.
I do not want this empty row as it shows in the chart. How can I get rid of this empty row?
how to fill the blank cells in a Pivot table. I am using Excel 2007. How to do it in excel 2007. Heard that there is a provision in excel 2010 version.
View 9 Replies View RelatedGiven a pivot table, is there any way that I can determine the source data that was used to create the pivot table?
I suspect that the pivot table was created using only part of the data, but I'm not sure.
I have written two macros to create a pivot table that displays data by month. I created a column that is a flag that indicates if the if an instance occurred in the last 4 months(later used as a filter). The issue is how to handle defining the last 4 months. If the current date is prior to the 16th, I want to define the last 4 months as not including the current month. If it is after the 15th, I want define the last 4 months as including the current month. Currently I have two different macros and I make the decision on which to run. I would like the macro to handle this for me. Below is the cell formula that I use to set the flag if it is in the first half of the month.
ActiveCell.FormulaR1C1 = "=IF(RC[-3]>EOMONTH(TODAY(),-5)+1,1,0)"
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
View 14 Replies View RelatedOn my data tab I've got a column for "review date." Some of those cells are blank. When you go to the pivot table, the respective cell for that blank.review date cell displays the date 1/29/14. There is no data in the cell on the data tab, so why would it be displaying 1/29/14? I want it to either say "blank" or just be blank. It does this for every review date cell that is blank.
View 3 Replies View RelatedI have created a pivot table in a workbook which relates to data from 2011 - 2012 and this works perfectly. What I now need to do is to copy the pivot table (without the data source) to a new workbook for data which will be collected from 2012 - 2013. Unfortunately when I copy it and try and find the new data source it does not update the filters according to the data in the new workbook.
View 5 Replies View RelatedI Have the following macro conducting web queries. As the list of websites is spread out I need to get the macro to skip over blanks?
VB:
Sub Top5Investors()
'
' Top5investors Macro
'
'
Dim Erw, Frw, Lrw
Frw = 1
Lrw = Range("A" & Rows.Count).End(xlUp).Row
For Erw = Frw To Lrw
[Code]...
I'm looking to create a formula that will skip past any blanks until it finds the latest and most up-to-date value.
Some context: I wish to return a latest estimate value to a cell (A5), and this value is updated quarterly. Let's say that the quater 1 value sits in cell A1, Q2 in A2, Q3 in A3 and Q4 in A4. I wish cell A5 to display the latest estimate as soon as a user updates it on a quarterly basis, but default to the previous quarter's estimate if that latest view is unavailable.
I've tried using some IF(ISBLANK...) combinations but am getting nowhere !
NB want to try and avoid Macros across this worksheet so a formula solution would be best.
I have this code to sort numbers from smallest to largest but i need it to ignore blank cells.
Sub sort1neg()
'
' sort1pos Macro
'
'
Range("a4:aq174").Select
ActiveWorkbook.Worksheets("sort").Sort.SortFields.Clear
[Code] ........
I have a range that I need to copy to a new worksheet. It basically looks like steps going across the sheet. Whenever I skip blank cells during the paste to the new sheet Excel does not skip anything. Any ideas on how I would shift all data to be on the left side of the without copying the blank cells.
View 5 Replies View RelatedI have a spreadsheet where a column has many cells being empty and others with values. I need to use copy-paste skip blanks to another column so it only overwrites cells that contains values. BUT The cells in the column appears to be empty, not blank, when I try use the copy-paste skip blanks it doesnt work. However, when I press delete in every empty cell the copy-paste skip blanks works for those cells.
Do you got a fast method to make all the empty cells blank?
The "Sum" sheet can change its number of rows. The pivot table is based on it. I'm having trouble with the SourceData portion of the code in my macro ....
View 9 Replies View RelatedI am facing a problem in pasting.
Col A Col B
aa
bb
cc
dd
e
ef
fg
h
g
h
my data is having blank cells. when I am trying to paste it in other column it is getting pasted as it is. I don't want to copy the blank cells. It should be like Col B.
I am trying to run an action on a series of cells that inserts rows whenever there are blank cells (resulting from the formula) in column.
The problem: When I have a situation where there are not blank cells, the the .SpecialCells action does not work. I have tried the On Error Goto, but I have multiple equations that can have this occur and I have only been able to use that feature once in a macro.
LR = ActiveSheet.Range("B65536").End(xlUp).Row
Set Rng = Range("A2:A" & LR)
With Rng
.FormulaR1C1 = "=IF(OR(AND(RC[16]="""",R[-1]C[16]=1),AND(R[1]C[16]="""",RC[16]=1)),"""",1)"
End With
Set Rng = Range("A:A")
With Rng
.SpecialCells(xlCellTypeFormulas, 2).EntireRow.Insert 'stopped here
End With
I would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields:
Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.
I'm trying to create a pivot in 2010, which gathers a cumulative amount from data sources within two different worksheets.
View 2 Replies View RelatedIs it possible to aggregate data in a pivot table from different categories?
I have excel 2003.
For PURE illustration, I have 6 columns, A-F, respectively:
"TV Show", 4 columns for names of people who watched the show (Persons 1, 2, 3, and/or 4), and finally, the duration / "Time" of the show.
I want to see in a final output:
Anytime a person has watched the show (whether i have penned him in columns 1, 2, 3 or 4), Excel to aggregate the total hours watched by that person.
When i try to do this with my pivot table i run into an error: if Person A watched "TV Show X" in row 1 and his name is in the Person 1 Column, Excel will not aggregate his TV time with "TV Show Y" in Row 2 when his name is in the Person 2 column.
It will sum up the categories separately even if the "Person" inputs in the separate "Person" columns are exact matches.
Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View 9 Replies View RelatedI have a pivot table that I created and now I want to use the same pivot cache to create another pivot table instance on a different worksheet. how can I do that? My first worksheet gets saved as "OO By buyer" and now I want to create a new worksheet and drop the next pivot there.
View 1 Replies View RelatedRecently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.
Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
View 6 Replies View RelatedOn a sheet called, "Details", I have a pivot table that has three fields in the column area, Calendar type, Description, and Dates. I want to filter the pivot table based on a label filter in the Dates column. The filter should be between two dates (in D4 and D5) that are entered on another sheet and passed to the Details sheet through formulas in cells D4 and D5.
I have attached the following code to a button on a different sheet.
The code successfully filters for the employee name (which is a report filter in the pivot table) which is in a named cell.
I am having trouble with passing the start and end dates to my pivot table filter. I do not get any errors, the filter is simply blank.
Private Sub CommandButton3_Click()
Sheets("Details").Select
Dim pt As PivotTable
Dim Employee As String
Dim SDate As String
Dim EDate As String
[Code]...
1) I want to create a pivot table in a new tab that has both the prefix “ENG” and the date of creation as the new name of the tab every time a new table is required, using the example headers highlighted in the attached file.
2) Then if possible format the table as in the example, i.e. bordered cells for all the data and the dates only aligned to the right. Example in tab “Eng 01 05 09”
No 1 is the most import question I would like help on. Formatting is not crucial. This is only to make the table easier on the “eye of the beholder”, I am writing this spreadsheet for people who have less knowledge than myself and would like to keep it as simple as possible, (run a macro and get the results).