i am looking for a macro that renames existing worksheets from multiple lists and have the new name appear in cell b1 of each new sheet.
List one: Worksheet name "Stats", cells b7:b20
Worksheets i would like renamed: Sheet9:Sheet22
List two: Worksheet name "Stats", cells 26:b34
Worksheets i would like renamed: Sheet48:Sheet56
I have a list of names in sheet1, starting with cell A3. I would like to copy sheet3, insert it after sheet3 and rename the sheet to correspond to the names in the list.
If i have 30 names I would like 30 sheets. If i add a name, I would like to repeat the copy, insert and rename steps for the extra names as i add them.
I have a worksheet titled "master plan" with many columns of data. I want to create many tabs based on this data.
One tab I want that just has the data from columns C, F, A, E, G and L (in that order) Starting with the header data in row 2. And titled "LOB".
Then I want a different tab for each unique item in Row C with these same columns (C, F, A, E, G and L from "master plan" tab or A, B, C, D, E and F from new "LOB" tab). The tab name should be the unique row C value.
So for example, say that there about 20 rows where 'A' is in column C, about 30 with 'B' in column 'C' etc .... There should be a tab with the name 'A' with those 20 rows of data and a tab with the name 'B' with the 30 rows with B and so on.
I also would prefer not to have to delete the existing 'A' and 'B' tabs every time before recording the macro so if it can either create a new tab or replace an existing tab with that name if it already exists.
To make things a little more difficult.. for the (in this example) 20 items with an 'A' in column C, there are (at this time) 3 different possible items in column B of 'master plan'. I'd like to create 3 separate tabs for each unique value in column B and I want the name to be dependent on the data in Column B (for example, the three unique items in column B with a column C of 'A' are Red, Green and yellow. I want three new tabs set up for each and the tab names to be: if B = Red, then tab name = 'Stop', If B = Green, then tab name = 'Go', if B = Yellow, then tab name = 'Slow'.
I have something that partially works, but I have to create the 'LOB' tab first and it doesn't work if any of the sheets already exist. And it doesn't do the Red, Green, Yellow part.
Here is what I currently have:
Sub DeptTabs2()
Dim strSrcSheet As String
Dim rngSrcStart As Range
Dim rngSrcEnd As Range
Dim rngCell As Range
Dim strLastDept As String
Dim intDestRow As Integer
On Error GoTo ErrHnd
[Code] ..
I have 20 sheets in the workbook. 10 sheets are named YR1, YR2, etc. Once the user enters information on sheet "Assumptions" - names are setup and linked onto each YR page. So user enters CY10, which links to cell C5 on YR1 to show CY10.
I would like a macro that renames just the YR1, YR2, ....sheets, to CY10, CY11, .... I do not want any of the other sheets to change names.
(FYi - Using Excel 2003)
how I can change this code to apply to only the sheets that are selected (grouped) as opposed to every sheet in the workbook?
For Each shName In ActiveWorkbook.Sheets
in the WorkSheet_Activate for Sheet 3, which changes the sheet name to the ComboBox Value. Is it possible to use the default name of the Sheet, in this case Sheet 3, if the ComboBox Value = "0". I have the following codes for a ComboBox & Userform:
Private Sub ComboBox1_Change()
Sheet3. Range("E1").Value = ComboBox1.Value
End Sub
&
Private Sub Userform Initialize()
ComboBox1.AddItem 0
For x = 1 To 60 Step 1
ComboBox1.AddItem Format(x, "0")
Next x
ComboBox1.Value = Sheet3.Range("E1").Value
I also have this code ..............
is there a quick and easy way to rename the Sheets In VBA Editor (they are currently all mixed up), i.e. I have Sheet221 followed by Sheet11 etc. Is there a way to reorganise them so that I get Sheet01 followed by Sheet02 etc.
View 5 Replies View RelatedI have a workbook containing many worksheets. The worksheets are clients in my system.
I have no big problems with my VBA code, but what I really thought was simple is causing my system to take very long time processing.
Sheets("Kunde mal").Select
Sheets("Kunde mal").Copy Before:=Sheets(3)
Sheets("Kunde mal (2)").Select
navn = Range("kundeNavn").value
ID = Range("kliNr").value
Sheets("Kunde mal (2)").name = navn & " - " & ID
Sheets("Kunde mal").Select
Why is this taking so many seconds?
Are there other ways to copy sheets?
I have a WorkBook with many Sheets "imagine Sheets.count=50"
9 of the CodeNames for this Workbook's sheets are: sht01. sht02, sht03, sht04, sht05, sht06...
If I want to change the name "not the CodeName" of say "sht01" I can use:
sht01.name="New Name"
but is there a way of doing this whitin a For Next this way:
For X = 1 To 9
Sheets("sht" & X.CodeName) = X ' the Name X is just for this eg
Next X
how to rename the sheets according to the current time 1201pm, 1202pm etc. i need a macro.
View 9 Replies View RelatedI have a macro which creates 4 worksheets. Unfortunately sometimes they are named by default "Sheet5", "Sheet6", "Sheet7", and "Sheet8" when the macro is set to "Sheet1", "Sheet2", "Sheet3", "Sheet4". My question, is there a way to rename the sheets directly after creating them so that the sheet in the very first position in the spreadsheet is named "Sheet1" (the same would go for sheets 2-4). The code below wont work if the sheet decides to be a name other then "Sheet5" so how do I point to the the worksheet known as Sheet5 without using its name and tell excel I want its default to be "Sheet1"?
Code below:
Sheets("Sheet5").Select
Sheets("Sheet5").Name = "Sheet1"
Sheets("Sheet6").Select
Sheets("Sheet6").Name = "Sheet2"
Sheets("Sheet7").Select
Sheets("Sheet7").Name = "Sheet3"
Sheets("Sheet8").Select
Sheets("Sheet8").Name = "Sheet4"
I'm tring to create a newsheet and rename the codename but it doesnt seem to be working. Here is my
Private Sub Update_Button_Click()
AddYear = YearBox.Value
WFName = "WF Tracker SITE " + AddYear
wf = "WF_Edin_" + AddYear
Sheets.Add After:=WF_Template
ActiveSheet. Name = WFName
Sheets(WFName).CodeName = wf 'This line wont work
End Sub
In column C I got some data like this:
Number of .csv
01
02
03
04
Number of .csv
05
06
07
08
Notice that there is an empty cell in between.The data starts at C12 up to C21. The data is in Sheet2.There are also 8 more sheets( Sheet3 to Sheet10). I want to rename each sheet, starting from Sheet3 according to each cell. For example the Sheet3 to be renamed to 01, Sheet4 to 02.
What I can do is something like this:
[Code] .....
And repeat this code for every block of data I got by changing everytime the i and the a. But this method is not so optimized because there are cases that the number of rows for each block is not the same and I have to change everytime the i counter. Is there any way to do 1 loop for all the sheets using maybe Worksheets.Count and another dynamic loop for the rows ? The data always start every 6 rows eg( C12, C18 etc). Also I was thinking to define an integer representing the number of rows for the loop...
How do I selectively rename sheets by sheet code name?
Instead of sheet1.name = "New Name" I need sheet1 to be a variable of a specific sheet.
Say you have a userform with 10 TextBoxes, let’s call them TxtN1…TxtN10 and your workbook has 10 sheets, say “Sheet1”…”Sheet10”. Now if one wants to code a procedure to rename those worksheets when the user hits a command button it’s simple enough.
Sub Rename_click()
For i = 1 To 10
With Sheets(“Sheet” & i )
. name = TxtN & i
End With
Next i
End Sub
But now if the user then changes the textboxes TxtN1…TxtN10 to a set of new strings it’s obvious that the following coding segment will not work:
For i = 1 To 10
With Sheets(TxtN & i)
.name = TxtN & i
End With
Next i
It goes without saying that the program will try to select the worksheets with the new name (and they obviously don’t exist yet)…
I receive a workbook each day with approx 500 tabs of call data and I would like to relabel all the tabs with the user names. The user names are in a merged range "A7:M7". I'm having difficulty getting the following script to rename the sheets. Currently the values in "A7:M7" look like "User: ADAM ENGEMANN-558".
I am trying to delete each occurrence of "User: " while naming the sheets as well as removing the merged range before doing so that the names are in A7 only. The sheet names should look like "ADAM ENGEMANN-558", or, ideally just "ADAM ENGEMANN". For some reason my code will not modify the cells. (See attached example)
This works if I manually unmerge the cells before running and remove the ":".
VB:
Sub RenameSheets2()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
If ws.Range("A7").Value <> "" Then
[Code] .....
This his how I modified it but it doesn't work on the supplied sheets. Please note that if I manually insert some blank sheets into my workbook and merge the cells etc it does work. There seems to be something odd going on with the sheets they are giving me. (they aren't protected)
VB:
Sub RenameSheets2()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
If ws.Range("A7").Value <> "" Then
I tried adding the following to remove the merged ranges and remove 'User: ' from the names
Range("A7:M7").Select
With Selection
.WrapText = False
.MergeCells = False
[Code] ......
CallSample2.xls
I have 5 sheets. In the first sheet I have set up 4 cells where I want the contents of them to automatically rename the other 4 corresponing sheets.
Eg.
In Sheet 1, Cell B6, I want the contents (which will be text) to be the name of sheet 2 automatically.
In Sheet 1, Cell B7, I want the contents (which will be text) to be the name of sheet 3 automatically.
I am working with a workbook that has data automatically entered each time a new child is enrolled to the program. The child's data is automatically entered to the sheet named "Intake". What I need to do now is rename that sheet using the child's name as the sheet name, but also keep the sheet named "Intake" for the next entry. I would then like to sort the sheets alphabetically but leaving the "Intake" sheet either as the first sheet or the last sheet. I have attached an example of the workbook I am working with.
View 6 Replies View RelatedI have several .mp3 files in a directory that I'd like to rename based on a list.
Currently I have a sheet with two columns starting at "A2" and "B2"
Column A contains the file path and old name (without extension) ie: C:RenameFromListOldName_01
Column B contains the file path and new name (without extension) ie: C:RenameFromListNewName_01
I've modified the code below (obtained here on these forums) to work with mp3 files, which renames them, but it also corrupts my files.
VB:
Sub Rename_Files_from_List()
Dim oFiles As Range, fPath As String
Set oFiles = Range("A2", Range("A65536").End(xlUp))
fPath = Range("D2").Value
[Code] .....
I am looking to do is make a copy of a hidden sheet named "Date" and rename the sheet tab based on a list of dates that I have on another hidden worksheet named "Date Names" I like the code to enter as many sheets as needed.
The dates are in order from A1 to A53 on the "Date Names "sheet .
I have a sheet with two columns; Column "A" has a list of existing filepaths of jpeg files that I would like to rename to the value in Column "B" in the same row. Is it possible for VBA to open each picture file and rename? Or open the parent folder and rename from there?
View 4 Replies View RelatedSheet1 has the list of names (cells A2:A315). Sheet2 is hidden and has related formulas. Sheet7 is the sheet i want to copy
What i want to do:
1) I want to copy sheet7 for each name on the list
2) Rename each sheet with the next name on the list
3) In each of the copied sheets in cell B1=newsheetname
I regularly receive many files that require renaming. Column A contains the current name and column B contains the desired name. Could anyone tell me how to use these lists to rename the files?
View 4 Replies View RelatedI have a macro attached with attached file; it will list the files then will re-name the files based on other cell
example;
Cell A2 = New.mp4
Cell B2 = ggffrr.mp4
so the file New.mp4 will be renamed to ggffrr.mp4.
it is working fine but the location will be always desktop or documents location
i need from the macro to rename the files and to keep them in the same location.
I have information on 7 seperate sheets in a workbook and need to bring the information from each individual sheet and compile on one sheet. I know this is simple and I'm making it a lot more complicated then it needs to be...
View 10 Replies View RelatedCells B2:B100 contain a list of sheet names, cells C2:C100 have entries TRUE or FALSE.
Is there away to setup a macro that goes through the list and if false, make the sheet very hidden, if true it should be visible?
I wanted to write a function that can search for the whole Workbook and give me the list of sheets that has the requirement/ name specified the first sheet. I have many sheets to search for and i cannot slist down each and every sheet using a Vlookup or countif function.
View 6 Replies View RelatedI have a long list that is geneerated each week and I need to split them based on their category acrross a number of sheets all named by the category. These sheets don't exist at the beginning.
My list would be like:
Col A Col B
UK Dave
UK Bill
UK Ann
US Bob
AUS Sheila
AUS Bruce
I want to run a macro down the list and build sheets for each unique ColA ie UK, US and AUS and then copy the ColB values into the correct sheets so UK has Dave, Bill and Ann in colA of the sheet named UK. anyone have an example of this type of process.
I got an employee list from couple of Site in different sheets it contains Employee name & Department but not a continued list, i.e.
on the attached file, i am looking to populate Summary Sheet, no of Sites, deparments & agents varies.
I want the Site, Department & Agent Name to Populate into one continues list without empty cells .
i have a names list in range P2:P100
like
P2 = A
P3 = B
P4 = C
P5 = D
P6 = E
P7 = F
then create the sheets with name A, B, C, D, E, F