I have numbers in range B1 to B100. How do I search for the first negative number (not the smallest negative number) within the range? Then, retrieve the Date indicated along A1 to A100?
View 8 Replies
I'm trying to figure out a formula to use that will exclude negative numbers. I have two dates. I'm trying to find the difference between the two dates assuming there is a date in the first column. At times there will be a situation where the date in A1 is before the date in A2 and it returns a negative number. I'd like to return a blank if there is a blank cell in column A and also return a blank if the return number is a negative.
Example:
A1 = 1/15/2013 B1= 1/10/2013 C1(formula) =IF(A1="","",(A1-B1) C1 will then reflect 5
A2 = (cell is blank) B2= 1/18/2013 C2 (formula) =IF(A2="","",(A2-B2) C2 will then reflect a blank cell
A3 = 1/5/2013 B3 = 1/15/2013 C3 (formula) =IF(A3="","",(A3-B3) C3 will then reflect -10
I'm trying to figure out a formula that would also allow C3 to reflect a blank cell since the formula returns a negative.
I go negative in one column I want it to show up in the next column as a positive number because when I add my income and subtract my bills and the negative from last month to get the what cash I'll have left it screws up because negative subtract a negative is a positive. So how do i get the sum of say B9 to from -$5.00 to +$5.00 into C4 so when i subtract C4 From my income it wont add to it.
View 1 Replies View Relatedhow can i count the positive days to a inserted date value or the past days (negative value) to the system date (today).
View 5 Replies View Relatedi have added a VB listbox in excel. i need to retreive listbox value in my macro code.
View 9 Replies View RelatedI have been trying without success to use Vlookup to lookup a value in one column, say the number 15. 15 in this column will fill cells in several rows as it refers to several different values in the second column. The second column only has one instance of each value, for example 42. Then with this information I have been trying to get Excel to retrieve a third value and return it to the cell from which I am entering
the formula......An example...
15............. 42 ................ yellow
15............. 42.5 ............... blue
15............. 43 ............... red
16............. 42................... purple
16............. 42.5................. green
16............. 43.................... pink
Is this asking too much of VBA? I don`t think so but cannot figure out how to properly enter a formula that will do this. I have tried Vlookup several different ways with no success. If I could get it to return the cell reference instead of the cell value on the first lookup excersize I could then make the second vlookup start at this cell reference to get the third number but I can`t even figure out how to do that.
I'm after a SUMPRODUCT that will give me the number of times that F is in column B2:B1000 when non of the following is in column A2:A1000.
000
001
002
003
004
005
006
All the above are in text format.
Example below would return 3.......
let have a cell with 1234;
how to retreive pairing in the cell automatically, in this case the 12 13 14 23 24 34 43 42 414 32 34 21,
i have my data layed out as per below, is there a dynamic formula which can be used for each bank to retreive the the count against each criteria, so if there are more rec breaks for any of the banks the formula will adjust accordingly ....
View 9 Replies View RelatedI would like to add to this formula.... if the result of "$L$6-Q15", from below, is 0 or a negative number, then the desired result would be 0 for this formula.
Possibly wrapping IF AND somewhere in this...
=IF((O15+(K16*$L$5))>=$L$6,$L$6-Q15,K16*$L$5)
This may sound simple, but is not (it might be easy for you hopefully)...... I have a string of numbers and the first few numbers can be either postive, negative or zero....Later on, the numbers all become negative......
I need to find the the cell which contains the first negative number in the consequtive negative numbers.....The difficult part is the numbers before the consequtive negative numbers can be anything......
is there a way to format a cell that will make the number a negative number regardless of what number I type; whether I type a positive or negative.
What i'm trying to accomplish is enter a number and the number will be negative. I don't want to have to type a negative in front of the number.
I spent couple of hours trying to figure this out, but without success. Please check the attached example. I need a formula that will find the max value (number of views in English anguage) in the column "I" and display the corresponding "Headline" value in the column "B". In the example it is "Headline 5".
I can not change position of the columns, i.e. "B" must remain "B" and "I" must remain "I".
I experimented with Index and vlookup but to no success. I have outlook 2003.
Is there a way to a formula that would show the following? A plus B = C but if A is below 0, stop the value at 0 then add column B:
Columns:
A B C
-2 5 5
1 5 6
0 5 5
How can I make excel to recongnize this: 123456- as a negative number?
View 7 Replies View RelatedHow would I write an IF statement that would tell me if a number in one cell is more negative than another?
For Example,
Cell L23 has a number of -10mm
Cell M23 has -20mm
How would i write an if statement in another cell saying that if cell 23 goes beyond -20mm "warning".
I keep getting an error saying #NAME?
How do I create a formula that tells me if a negative number appears in a column.
for example, the following numbers are in cell A1:A5
10
15
-1
12
8
I need a formula in B2 that tells me if A1:A5 contains a negative number.
I keep getting the correct answer, but it returns it as negative and I need a positive answer.
View 1 Replies View RelatedHere it is i needed to get the total of all negative and positive value.
View 2 Replies View RelatedI want to subtract column B from column A and put the result in column C. If the result is a negative I want a formula to turn it to 0.
View 4 Replies View RelatedI need formula for if cell value = negative number e.g.(-2202) change cell value to 0
View 5 Replies View RelatedI have this report that comes as a text file.
It makes negative numbers look like 1245.35-putting the - sign at the end. I need some way to make these negative numbers look like -1245.35. Only these negative numbes need to be re-formatted.
In one column, I have a formula that will produce a positive or negative number. If the number is negative, I want it to be automatically transfered to the adjacent cell/column. I don't want a positive number transfered though.
View 9 Replies View RelatedMy bank sends me my statement data as: Description, Date, Amount
...where the amount is text as a number followed by either a plus or minus.
Does anybody know how quickly convert the column of data into proper numbers?
I've been playing around with LEN, RIGHT and SEARCH, but not getting very far because I don't know how to extract the text to the left given the numbers vary in the number of digits...
I currently have the following in a cell:
=BDH(AHD!A3,"px_last","-5cm","-5cm")
This currently displays as -32 pulling this number out of bloomberg.
I now want to write a formulae in this cell that will display this as 32c if it is negative... and 32b if it is positive.
So if the number pulled out is negative I want it to have a c after it (and please have it delete the minus sign) and if positive, then have a b after it.
I came across this expression going through an Excel VBA code. Can someone plz explain what the argument (-1,1) points to ?
View 9 Replies View RelatedI have row of dates and underneath those dates I have a row of numbers. The numbers count down. For example:
[Code] .....
At the end of the row I want a cell to return the date that the row first started going negative at. In this example, it should display 10/31/2014 (for when it went to -60).
I am trying to write code that will locate either a 0 or the smallest negative number in a range, eg,
example 1,
8, 6, 2, 0, -0.5, -2
the result would be 0
example 2,
8, 6, 2, -0.5, -2
the result would be -0.5
I'm trying to come up with a formula to seach through an array backwards, and tell me where the first negative number is located.
Example
A1
1
B1
1
C1
-1
D1
1
[Code] ..........
If you fill out the cells A1:J1 like so, and enter
=MATCH(TRUE,A2:T2
I need to have a formula or code so that when a number is entered in cell E12 or F12 or L12, or M12 would treat a positive number as a negative and a negative number entered would be a positive in that respective cell.
View 9 Replies View Related
