Formula - To Retreive The The Count Against Each Criteria
Feb 13, 2010
i have my data layed out as per below, is there a dynamic formula which can be used for each bank to retreive the the count against each criteria, so if there are more rec breaks for any of the banks the formula will adjust accordingly ....
View 9 Replies
ADVERTISEMENT
Sep 5, 2008
I'm after a SUMPRODUCT that will give me the number of times that F is in column B2:B1000 when non of the following is in column A2:A1000.
000
001
002
003
004
005
006
All the above are in text format.
Example below would return 3.......
View 9 Replies
View Related
Jan 29, 2014
i have some formula but not really work,
Code:
=IF(a2"",COUNTIF($a$2:$a$7,a2))
for example :
name
title
expected result (count)
a
x1
3
x5
x3
[code]....
View 9 Replies
View Related
Jul 2, 2014
The "TRAINING" sheet has a formula in column "R" which checks and counts clients in the "DATA" sheet.
Inside the formula it looks for a date in Column "O" of the "DATA" sheet equal to or greater than 01/01/2014.
I would like use the date (Month) as the criteria shown in Column E of the "Training" sheet, still using Column "O" of the "DATA" sheet so that the result returns the count of only those within that month's date.
View 3 Replies
View Related
Dec 7, 2013
What I require : Column F to be blank as long as the following is true:
1) Column A (Order) cannot be blank.
2) Column E (Status) has to be equal to either "Completed" or "Successful".
3) Column D (Sales) has to have the same date as Column C (Contact), but due to bad data quality each order number can have several rows and as long as the Sale date from one of the other "Duplicate" rows equals the contact date it needs to be counted. This is as long as there is not already a row for the Order that already has Sales / Contact day matching.
In the attached spreadsheet, I have highlighted the rows that should be blank in column F in green. My attempts at formulas to count this are in the columns highlighted in red.
WORKAROUND.xls
View 1 Replies
View Related
Dec 18, 2011
I need to formula to count the number of cells that meet the criteria below,
Find the letters 'AT' in some part of the cell and a blank cell next to it...
Doing a different formula for each, doesn't bring out the correct figure.
View 3 Replies
View Related
Jun 27, 2012
I can't seem to get a formula to work. I am trying to count the number of times "EE" shows up in a range only if "CR" is listed in that row within another range. For simplicity Column A has a list with the following values scattered from A2 through A100: CR, LT, ST, DI. Column B has a list with the following values scattered from B2 through B100: EE, EF, EG.
I need to know how many EE's are listed in column B if CR is on the same line in column A.
View 6 Replies
View Related
Nov 13, 2013
I currently have the formula =Countif(E5:E158,"YES"). This formula works great if when I dont filter, however, I need to filter through the data and I only want it to count the cells that have "Yes" when it is filtered, not just all the cells. I searched to forums and people keep referencing Subtotal() however that is counting all the cells and not pulling out the "Yes" inputs only.
View 2 Replies
View Related
Sep 18, 2006
Count unique records in Column B where.
1.)
... Column H >=A1 and <=A2
2.)
... Column H <>"" and Column I <>"expired" and <>"" and Column I >=A1 and <=A2
3.)
... Column H <>"" and Column I ="expired" and Column H+120 >=A1 and <=A2
4.)
... Column H <>"" and Column I >=A1 and <=A2 and Column J =""
A1 - user defined (start) Date 1
A2 - user defined (end) Date 2
Column B - 6 digit number (or blank)
Column H - Date 3 (or blank)
Column I - Date 4 (or "expired" or blank)
Column J - Date 5 (or blank)
View 7 Replies
View Related
Dec 4, 2012
Attached excel sheet below. Suggest a formula to get the count of items that fall in a specific data range ?
Count of items that specify a range criteria.xls
View 4 Replies
View Related
Dec 8, 2008
I am trying to use COUNTIF formula to count how many item in a column that meet certain criteria, say between 10 and 20...
=COUNTIF(G1:G100,"AND(>10,<20)")
View 3 Replies
View Related
Sep 3, 2013
Currently, I am using countifs to count data within a specific range if it meets a criteria. Now I want to add to the formula. I need to count the cells within the specific range meeting the existing criteria I already have but only if one cell is greater than another cell.
This is what I currently have: =COUNTIFS(Report!$F$4:$F$1048576,">=8/1/2013",Report!$F$4:$F$1048576,"=8/1/2013",Report!$F$4:$F$1048576,"
View 2 Replies
View Related
Jun 4, 2013
I have a worksheet. I would like to count unique number of "Trans" in column A only if value of cells in column B "Type" equals "Return". In example below, I would want to see the value "3" as total.
Trans Type
1 Return
2 Return
2 Return
3 Exch
4 Exch
5 Return
5 Return
View 9 Replies
View Related
Jun 1, 2007
I am trying to use the DCOUNT function to count based on two different criteria in adjacent columns is this applicable.
Situation:
I have column B that contains initials and I have column C that contains a type (of store) so it'd look like this
jp RET
jp RTO
jb RET
ma RTO
Rn CI
ma Fur
tc CI
ma RET
jp RET
and I want to have a count of how many RET's there are for Initials JP ect
View 6 Replies
View Related
Aug 21, 2013
formula to count two criteria in the one column if there is a third criteria in another column. i.e. if column B = either "A" or "B" and column C="D". I have tried the countifs function without success.
View 4 Replies
View Related
Feb 2, 2009
i have added a VB listbox in excel. i need to retreive listbox value in my macro code.
View 9 Replies
View Related
Jan 13, 2007
I have been trying without success to use Vlookup to lookup a value in one column, say the number 15. 15 in this column will fill cells in several rows as it refers to several different values in the second column. The second column only has one instance of each value, for example 42. Then with this information I have been trying to get Excel to retrieve a third value and return it to the cell from which I am entering
the formula......An example...
15............. 42 ................ yellow
15............. 42.5 ............... blue
15............. 43 ............... red
16............. 42................... purple
16............. 42.5................. green
16............. 43.................... pink
Is this asking too much of VBA? I don`t think so but cannot figure out how to properly enter a formula that will do this. I have tried Vlookup several different ways with no success. If I could get it to return the cell reference instead of the cell value on the first lookup excersize I could then make the second vlookup start at this cell reference to get the third number but I can`t even figure out how to do that.
View 5 Replies
View Related
Apr 7, 2009
I have numbers in range B1 to B100. How do I search for the first negative number (not the smallest negative number) within the range? Then, retrieve the Date indicated along A1 to A100?
View 8 Replies
View Related
Jun 22, 2009
let have a cell with 1234;
how to retreive pairing in the cell automatically, in this case the 12 13 14 23 24 34 43 42 414 32 34 21,
View 9 Replies
View Related
Feb 9, 2009
I spent couple of hours trying to figure this out, but without success. Please check the attached example. I need a formula that will find the max value (number of views in English anguage) in the column "I" and display the corresponding "Headline" value in the column "B". In the example it is "Headline 5".
I can not change position of the columns, i.e. "B" must remain "B" and "I" must remain "I".
I experimented with Index and vlookup but to no success. I have outlook 2003.
View 5 Replies
View Related
Dec 6, 2013
I have a table with 3 columns with an unkown number of rows (text, date, date) that is being imported daily.
I want to create a 4th column with dates starting from today and each subsequent row be one day earlier. I want to look at 30 previous days.
I then want to count the number of rows (looking at column 1-3) with the following criteria:
Countif column2<= "date in colum4" AND column3< "date in column4"
View 6 Replies
View Related
Sep 22, 2009
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
View 5 Replies
View Related
Mar 7, 2012
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
View 5 Replies
View Related
Jul 30, 2008
I have a spreadsheet which lists letters issued, the date issued and the potcode. I need a formula that counts, on a weekly basis, the number of letters issued to postcodes in Sutton and Bexley.
I have a count sheet set up on one worksheet and the list of postcodes applicable to each area are listed on another worksheet. I have been playing around with sumif, sumproduct etc, but these don't seem to work as I am pointing the formula to a list of postcodes and not an individual postcode. For example, the formula for one week needs to tell me, the number of letters issed to Sutton between 26/07/08 - 01/08/08. This is what I tried -
=SUMPRODUCT(('MU63 NC'!$F$2:$F$10>=COUNT!B$2)*('MU63 NC'!$F$2:$F$10<=COUNT!B$3)*('MU63 NC'!$D$2:$D$10=Sutton!$A$2:$A$50))
But I get #N/A - if I change the last refernce to a specific cell instead of a range it works, but this will make the process very lengthy as there are lots of postcodes!
View 5 Replies
View Related
Jan 20, 2014
I need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.
Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.
Book1.xlsx
View 2 Replies
View Related
Jan 20, 2008
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
View 9 Replies
View Related
Aug 21, 2006
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies
View Related
Mar 26, 2009
I am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
View 2 Replies
View Related
Feb 5, 2010
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies
View Related
Oct 19, 2009
I have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....
It looks something like this.....
Column A Column B
Document No Category
11000001 A
11000002 B
11000003 B
11000002 A
11000001 A
Is there anyway to do this without subtotalling for each document and then a count?
View 9 Replies
View Related