this is a formular that i used to divide
=IF(Z6=TRUE,K6/MID(D6, FIND("1=",D6)+2,LEN(D6)-FIND("1=",D6)-1),K6)
the problem i have is that if i have 14 in cell k6 and 1=10 in d6 the answer i get is 1.40 what i need the formular to do is always round it up to the highest number
ie 2 not 1.4
example 1=10 20 answer 2
1=10 25 answer 3
1=4 11 answer 3
1=4 20 answer 5
For this example, A1 is the given at 19.875 I am trying to get A2 to net a result of 19.5. A2 is to net that result by searching through cells B1:B14 and finding the nearest equal or lower number. If A1 is less than 13.5 a result of "error" should be generated in A2.
B1=13.5
B2=15.5
B3=17.5
B4=19.5
B6=21.5
[Code]...
rounding the numbers. I am working on a quote in which quantity is arrived by dividing the sell price by Total sell price. The condition is the result (quantity) should always be a whole number, I can achieve that by cell formatting but when the calculation is done using handheld calculator the results are different.
I need the result to be same if using excel or handheld device i.e quantity in whole number.
I want to use a formula that will round the number UP to the next whole if the the tenths is .3 or higher and round DOWN if the tenths is .2 or lower.
ex. 79.1 --> 79
79.2 --> 79
79.3---> 80
79.4---> 80
79.5---> 80
79.6---> 80
79.7---> 80
79.8---> 80
79.9---> 80
I am thinking this is either not possible or would be an If Then type formula but way beyond my knowledge.
The reason I want to do this is becaue if my student has a 79.5 avg for instance I would normally round to 80. However if they are off by just .1 (ex 79.4) i still want to give them the 80 and then I decided to make it within .2 (ex. 79.3.)
I have budgets that I want to round to certain numbers
For example:
55% rounds to 75%
45% rounds to 50%
33% rounds to 35%
And so on. I have about 7 of them to do, I'm hoping that someone can help with this. I have been struggling all morning on it.
Is there a code that turns 4.123 to 4.5, so it rounds .123 to .5
And same for 4.8 a code turns it to 5, so it rounds .5 to 1 and add it to 4
I tried with round, but……………..
i want to do something that should be relatively simple, and yet it is not... has me stumped. what i'm doing: taking a range of numbers... from 1-19, 20-39, and so on, and using a vlookup function to pin a rating for said value off a reference table. heres a example of what i'm doing:
A | B
1 1
2 1
3 1
4 1
5 1
... ...
19 1
20 2
... ...
40 3...................
I want round off number to be with the decimals (usually decimals r discarded for round off feature). I ll be able to explain better with an example.
10.36+10.36= 20.72. If i round it up, it vl be 21.
what i am tryin is to get 21.00 after round off.
I prepare my bills in excel and after total of all products, if i get a decimal number, I would like it be rounded off to whole number with decimal and 00 at the end (eg. 21.00 instead of 21.27 or 22.00 instead of 21.77). I tried to change decimals but when I select 2 decimal places, it gives me the actual fig(eg. 21.27 instead of 21.00)
I am already using =sum for the total so cannot use another formula (as far as i know, 1 cell can have only 1 formula. Dunno if multiple can be used in a single cell).
I need to round numbers up in a spreadsheet to the nearest .05 . For example, I would need to change 1.502 to 1.55 or 1.556 to 1.60 .
View 3 Replies View RelatedI have a number in a cell (12.34) I wish to copy this number into a user form textbox. I can copy the number, however it is about 6 places behind the decimal point. How can I round the number going into a textbox to 2 places?
View 7 Replies View RelatedI work in a finance dept and we often need to divide our numbers into 12 months but I need to only work with whole numbers, not decimals. Is there a way for example of forcing either in a formula or with VBA code to get 10,000 to divide equally by 12 months? At the moment it comes out at 833.333333. What I want is something that randomly assigns 833 to any one of the 11 months of the year and for the other remaining month put in the difference which is 837 to get the total to add up to 10,000exactly.
View 9 Replies View RelatedI am trying to round a number to next multiple of 10 with condition i.e. for example if number is 1230.56 then it should round off to 1230 but if the unit number is more than zero i.e. 1231.56 then it should round off to 1240.
That means the main number should round off to next multiple of 10 only if unit number is equal to or more than 1.
Example 120.11 should round off to 120
121 to 130
120.99 to 120
119 to 120 and so on
I have numbers ranging from 1 to 90 that need to be rounded the nearest whole number that is divisible by 5.
Expected outcome
1 should round up to five88 should round up to 9072 should round down to 70
Round - modified for multiples of five* - works perfectly well for number that are greater than or equal to 3. However, 1 and 2 round to zero.
I have tried using IF to have the formula ROUNDUP for 1 and 2 and ROUND for 3 and up with no luck.
Every result I have seen with the Google says the solution is "=ROUND(A1*0.05,0)". This does not work.
VBA is an option for this workbook.
*ROUND(A1/5,0)*5))
I guess I have an odd rounding up query. I want to know if its possible to make excel round up a number to the nearest number from within a list of numbers.
For instance my list could be
10
12
15
17
19
22
25
30
35
42
The numbers arent odds or evens or multiples of anything so I'm guessing there won't be an inbuilt function to do this but is there anyway I could get to the answer in a more round about way with helper calculations??
I guess I could use the following -
=IF(A1>42,"Error",IF(A110,A112,A1
I Need Formula To Number To The Nearest Number In Te Tabel
View 9 Replies View RelatedI work in a finance dept and we often need to divide our numbers into 12 months but I need to only work with whole numbers, not decimals. Is there a way for example of forcing either in a formula or with VBA code to get 10,000 to divide equally by 12 months? At the moment it comes out at 833.333333. What I want is something that randomly assigns 833 to any one of the 11 months of the year and for the other remaining month put in the difference which is 837 to get the total to add up to 10,000exactly.
View 9 Replies View RelatedIt's been awhile since I've done this...and I tried searching for the solution but to no avail.
I'm trying to edit the contents of a series of numbers by using the Rounding function. When I execute my macro on the next cell, it uses the value of the original cell when the macro was created. Here's a copy of my macro:
Sub RoundTest()
'
' RoundTest Macro
' Macro recorded 7/26/2007 by Aramark Uniform Services
'
' Keyboard Shortcut: Ctrl+l
'
ActiveCell.FormulaR1C1 = "=ROUND(2103.86,0)"
ActiveCell.Offset(1, 0).Range("A1").Select
End Sub
I'm trying to do a simple calculation of the # of hours between 2 times, rounded up to the nearest hours. Somehow along the way I've ended up with this massive formula below, which is doing what it's supposed to do except for certain cases (like the one in the attached file...where it says the difference between 2am and 3am is 2 hours) =ROUNDUP(IF(B2="",0,IF(A2="",0,(IF(B2<A2,((((B2+1)-A2)*1440)/60),(((B2-A2)*1440)/60))))),0)
View 4 Replies View RelatedI receive a list of numbers that are rounded to three decimal places. I need to round them to two decimals - here's the catch - if the third decimal is a 9, it needs to go up, otherwise, 1-8 need to round down.
Example
3.678 goes to 3.67
3.679 goes to 3.68
If the third decimal is <=8, it needs to go down.
the way my spreadsheet's set up so far is that each employee should have a goal of, say, 100 for how many people they need to sign up. But they each have specific geographic breakdowns in their turf, some of which might be bigger or smaller than others, but at the end should all add up to 100 for each employee.
It's not super hard to do since I just take a goal of 100, in this example, and multiply it by the percent of population of the area in their overall assignment and give them a goal for that area based on that. So if Philadelphia has 70% of their total population, Upper Darby has 20% of their total population, and Phoenixville has 10% of their total population -- the goals would come out like this:
Philadelphia, Goal: 70
Upper Darby, Goal: 20
Phoenixville, Goal: 10
Ryan, Total Goal: 100
For some of the employees, that works out perfectly -- but based on the population sizes, the rounding sometimes gets a little off and it could end up like this:
Philadelphia, Goal: 71
Upper Darby, Goal: 19
Phoenixville, Goal: 11
Ryan, Total Goal: 101
For most employees, it ends up being dead-on 100 -- but there are some whose totals are at 98 or 99 or 101, and I was wondering if there was a way to force it to shave a point off or add a point on somewhere, pending on how close the decimal was when it rounded to make sure that it always ends up exactly on 100. (I'm using 'Data >> Subtotals' to get what's being represented above as "Ryan, Total Goal.")
I have a cell that is going to be used for the quantity of a certain item. I would like to dummy proof this sheet as much as possible so that if someone puts in 21.5, that it will do something like change the value to either 21 or 22, since there can't really be a .5 of this item.
View 5 Replies View RelatedI am doing a huge price increase for a price book and need to rasie each price by 3% and have it rounded to the nearest dime.
Is there a formula to do this in one go and not have one cell with the rounded price and another for the nearest dime price.
We are trying to find the correct formula to round number to the nearest even number. In the attached example, 0.105 should round to 0.10 since the zero to the left of the five is even. If the problem was 0.115 then the answer would be 0.12 since the one to the left of the zero is odd.
I want to get highest number from filenames in a folder.
for example below are files in folder
AB-1234-001.plt
AB-1234-002.plt
AB-1234-003.plt
AB-1234-004.plt So I want to get "004"
XY-12345-001.plt
XY-12345-002.plt
XY-12345-003.plt
XY-12345-004.plt
----
----
XY-12345-075.plt
XY-12345-076.plt Here I want to get "076"
file format is same but some times 4 digits in middle (AB-1234-001.plt) and some time 5 digits (XY-12345-001.plt)
My idea is , counting files ignoring suffix (eg 001,002,003) and count howmany are in folder. So code counts based on AB-1234 and return me value how.
I'm using this CF to show me the largest number in a range;
=F10=MAX(F$10:F$33)
I now want to also show the second largest number in the same range.
I have a few rows in an excel sheet and I want to highlight the highest number(s) in each row.
I've been playing around with conditional formatting, and using the formula:
=$C23=MAX($C$23:$C$55)
in the conditional formatting box and selecting a formatting type, I can automatically highlight the highest number in column C (row 23 to 55). However, this formula only seems to work when I'm selecting columns of data rather than rows. If I want to highlight the highest number in row 23, the formula I'm using is:
=$C23=MAX($C$23:$M$23)
Which I think should highlight the highest number From C23 to M23, but it doesn't - nothing happens.
What am I doing wrong?
in cell A1 i have the balance. i would like to record the balance every time it reaches a new high in cell B1. how would this be possible please using excel 2007
View 9 Replies View RelatedI have a table of information which is sorted in ascending order. I have created a vlookup to find the highest value as close to 1 as possible.
Say it returns the value 0.95.
i now have another cell which i need to find the second highest value from the column of data.
however i dont know how to do it. because the second vlookup function just returns the 0.95 all the time and not the second highest value..
E.G.
Column A
0.70
0.75
0.81
0.84
0.87
0.90
0.95
So in the cell with the first Vlookup i get the value 0.95 returned.
I need then for the second cell to return the next highest value in this case 0.90.
Then third cell third highest
fourth cell fourth highest value etc.
I have a dilemma. What I want to do is: If I input a date in a cell I want the adjacent cell to take the next highest number from a list on another worksheet. My example attached
View 3 Replies View RelatedI want to multiply a number say, 1551 by 5%, 6%, 7%, 8% and 9% and round each result to 0 decimal places. Then the sum of these results (544)should be equal to 35% of 1551 rounded to 0 decimal places (543). How do I create an if function for rounding so that the sum equals 543.
View 6 Replies View Related