I'm trying to do a simple calculation of the # of hours between 2 times, rounded up to the nearest hours. Somehow along the way I've ended up with this massive formula below, which is doing what it's supposed to do except for certain cases (like the one in the attached file...where it says the difference between 2am and 3am is 2 hours) =ROUNDUP(IF(B2="",0,IF(A2="",0,(IF(B2<A2,((((B2+1)-A2)*1440)/60),(((B2-A2)*1440)/60))))),0)
View 4 Replieshow to roundup and total time using formula? specifically with the format mm:ss:0? i have 3 columns with these formats and would like to add them up but can't seem to get the right formula.
View 4 Replies View RelatedIs there a way to calculate the number of hours between two times specified like this:
Start
End
Hours
Comments
Mon 6:00p
Mon 9:00p
3.00
Same day
[Code]..
I think I can write a UDF and that may be the easiest. Is there a straightforward way without a UDF?
I have 2 dates+ times.
1 the contract start date and time.
2 the contract end date and time.
Can I calculate the number of working hours between these two using a formula?
So if I have a 10 hour working day (08:00-18:00), Mon-Fri and the two Dates/Times can I calculate the number of working hours?
Example
Start 06-Mar-07 10:00
End 14-Mar-07 14:00
This is 2 part days and over a weekend.
The below formulae allows me to see the difference between two dates and only returns the difference in working hours ie :
Difference between
02/02/2010 08:00 & 03/02/2010 08:00 is 16 Hours 0 Minutes
=(INT(A3)-INT(C6))+MAX(MOD(A3,1)-MAX(MOD(C6,1)))
The following displays it in the Hrs and Mins format
=TEXT(B15,"[h]")&" Hour"&IF(OR(TEXT(B15,"[h]")+0=0,TEXT(B15,"[h]")+0>1),"s "," ")&MINUTE(B15)&" Minute"&IF(MINUTE(B15)1,"s ",""))
A1 is 10 (10 hrs worked) , A2 is 10:30am (in time), A3 is 9:00pm (out time), A4 needs to be the total hours and minutes between A2 and A3 based on the hours listed in A-1. What i need is a formula that will calculate the hours and minutes between the 2 times based on hours entered in A1 but that will also compensate for a manadatory 30 minute lunch that needs to be deducted from the total hours if hrs listed in A1 are more than 6.
example: worked 10HRS, 10:30am to 9:00pm, Total hrs is 10hrs 30min, which should be just 10 since the lunch is a none work time and must be subtracted.
If a person worked more than 6hrs, they must take a lunch. if they worked less, than 6 then they don't have to. I need a calcuation to recognize the greater than, less than factor into the equasion also.
This is for employee time sheet and schedule. I have multiple employees work a specific shift on various days. I need the calculate the hours worked each day and then have them totaled at the end of the period. Here is and example:
Employee Monday Tuesday Wednesday Thursday Friday Saturday Sunday Total Hours Total Cost
John Smith 10-5 12-6 9-2 5-10:30 3-8:30
How do I get it to calculate the difference in the same cell, convert it to hours, add up all the results and place it in the totals columns then calculate those totals by their pay rate to get my Labor cost?
I am working on a spreadsheet where I want to count the number of calls to our service desk between specific hours (ie. 6:00 a.m. - 7:00 a.m.) up through 8:00 p.m. I have looked at all the forums and tried all the formulas that seemed to be what I was looking for and it isn't working! I am adding the information to a summary spreadsheet from which I am gathering the information from other sheets in the workbook. This will be an ongoing spreadsheet done weekly for every month.
Examples: I need to know how many calls from these times on a summary sheet.
6:23
6:28
6:59
7:09
7:35
7:38
8:00
8:26
8:34
8:42
8:43
9:02
9:04
9:23
9:27
9:31
10:06
10:23
10:37
10:51
11:05
11:09
11:19
I receive data from a company I deal with that has the date and time of all of my transactions with them listed in an excel worksheet. Only problem is that the date/time that I receive is not in my timezone, which is a bit of a problem for me!
What I want to do is to be able to adjust the date and time shown in the cell forward by 14 hours, so that the data is shown in the timezone that I am currently in. So the end result for the first line of data in the attached file would end up being 2006-08-11,10:28:51 instead of 2006-08-10,20:28:51.
Basicly we pay single rate between 8.00am and 8.00pm at all other times and on bank holidays and weekdays we pay an enhanced rate. If I can calculate the standard hours then the remainder of the hours are enhanced. Aim to count how many work hours fall between a standard start time (SHS) and a standard end time (SHE) (currently 8.00am and 8.00pm), that do not fall on a weekend and are not a bank holiday.
Column B = Start time (eg 06:00)
Column C - End time (eg 22:00)
Column D= date (from which day of week is derived)
Column E = Y or N for whether it is a bank holiday or not..............
I would like to get formula which can show how many hours are after midnight from two times, example:
PHP Code:Â
clock in > clock out = hours after midnight
23:00Â ->Â 1:00Â =Â 1:00
01:15Â ->Â 4:15Â =Â 3:00Â
Please see this example: [URL] ......
I need the difference between two dates/times field in hours or minutes.
Eg:
A1 B1
1/4/05 10:00 2/4/05 14:30
The result should be 13.5 hours, considering only 8 hrs per day, only business days and 8 to 5 workday.
I can’t figure out why this formula is not working. I am trying to alter it a little, but I still think it should work. Here is what I am trying to do. I am looking to calculate the time difference between two work projects, but exclude time when the office is closed. So someone starts a project at 2pm and finish 10am the next day it will show a result of 4 hours because the office closes at 5.
Here is the formula. It is the time formula from cpearson.com ...
I have problem to calculate the time which is more than 23:00:00hrs in a file. I need to compare the benchmark time and the difference of time(start time and end time) and show pass/fail depending on benchmark set time. For few of the times which is more than 23:00:00 hrs the format is taking different(example: for 49:15:48, it is showing 02/01/1900 01:15:48 in formaula bar) for which i am not able to use formula and know pass/fail.
View 4 Replies View Relatedi need to get a formula that will calucate hours and min. its for how many hours the employee has not worked. some of them would be strait hours some would be just min there is no way to tell.
example
lates 2 hours
anp(absent no pay) 12 hours
sicks 55.5 hours
no calls
early outs 21 min
(this is just an example if it were real this person would be fired)
i know this adds up to 69.85 hours but i can't fuiger out a way to get it to calucate in excel. i know i could have it all changed to min and then devied by 60 to get the hours but how do i get it to read what is mins and whats hours?
in speeding up the below code as it does not seem to matter whether I use For, If loop etc - it runs too slowly. Basically we have one sheet which is input in a different timezone that needs converting to GMT... since daylight saving I wrote some code to cover the +/- 1 hour difference (this seems to work quite well) yet when it comes to converting the actual cells it runs incredibly slowly. I appreciate any help but its only the code after "Sheets("data").Unprotect" that i think needs changing. The time stamp is in column 7 - I hope this makes enough sense - which then gets converted by either 4.5 or 5.5 hours dependent on british summer time.
Sub TimeConvert()
With Application
.Calculation = xlCalculationAutomatic
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
Dim FirstDate As Date
Dim Position, DayIndex, lgrow, lstrow As Long, TargetMonth As Long, Stweekday, Enweekday, Tdate As Date, TargetYear As Long, cell As Range
Dim bst As Boolean
TargetYear = Year(Now)
TargetMonth = 3
Position = "L"
DayIndex = 1
I need to calculate the difference between a start time and end time in hours and minutes.
Start
01/07/2008 11:40
End
01/08/2008 19:28
Start and End columns are formatted as 'Custom' m/d/yyyy h:mm.
I'm not sure what formula to write to calculate the hours and minutes between the two times. Everything I've tried doesn't count over 24 hours. Also what do I format the result cell as?
Im trying to calculate hours and minutes between two dates/times over more than 24hrs. I have:-
A1 is 18/10/08 13:14, B1 is 20/10/2008 12:20, C1 is 1:23:05
Using the formula C1 =INT(B1-A1)&TEXT(B1-A1,":hh:mm")
But what I really need is just Hours and Minutes so the above should read 47:05.
I am trying to figure out a difference in hours between date & times.
Cell & Info:
A1 = 07/12/2008
A2 = 02:00:00
A3 = 07/12/2008
A4 = 04:00:00
So in cell A5 i want the difference which is: "02:00:00"
but i dont know how to include the data in the formula....
etc if:
A1 = 07/12/2008
A2 = 01:00:00
A3 = 08/12/2008
A4 = 01:00:00
A5 should be = "24:00:00"..
In a single employee Timesheet spreadsheet:
....................Mon.....Tue.....etc.
In:................6:65.....6:71
Out:............12:07....12:05
In:..............12:62....12:41
Out:............15:66....15:73
Hrs Worked:.....8.46......
How to format the cells in the daily columns and what formula to calculate 'Hrs. Worked'?
I need to calculate billable hours.I have a start date/time and end date/time.Then I need to subtract out all time between 05:00:00.000 and 20:00:00.000. These are not billable hours.But I can include all weekend time.And I can include all holiday time.I need to accomplish this with formulas, no macros.
View 2 Replies View RelatedI got a problem with a time calculation, if it's even possible.
I want to calculate the amount of hours that have been woork in a slot.
Example:
First slot is from 08:00am till 17:00pm, time cost 100%
Second slot is from 1700am till 24:00, time cost 110%
Third slot is from 24:00 till 08:00 am, time cost 120%
I'm working from 08:00am till next day 01:00am
So my hours are:
9 in slot 1,
7 in slot 2,
1 in slot 3.
Is this possible to calculate in Excel?
I got a file attached with a sort of layout.
I am creating a 'HelpDesk Issue Logger' and I am trying to calculate the Network Days and Network Hours between two dates with times. I want to know how many business days and hours are between the two days to give me a TURE 'Response Time.'
I have been to several sites and forums looking for the answer, but I have not been able to find a solutions that works for me. Please find attached a 'stripped' down version of my project.
Variables:
- 'Date Received' (H11)
- 'Date Actioned.' (I11)
-'Response Time' (K11)
Constants:
Work Days = Monday to Friday
Work Hrs = 8:30 AM to 5:30 PM (no lunch break)
Public Holidays = (AC13:AC30)
Formats:
Date Received: dd/mm/yyyy hh:mm AM/PM
Date Actioned: dd/mm/yyyy hh:mm AM/PM
Response Time: d - hh:mm
If there is someone out there wiling to put me out of my missery with this one, you will have a friend for life.
In a single employee Timesheet spreadsheet:
....................Mon.....Tue.....etc.
In:................8:00.....8:30
Out:............12:00....12:00
In:..............13:15....13:00
Out:............17:45....17:00
In:................0:00....19:00
Out:..............0:00....20:15
Hrs Worked:.....8.5......8.75. How to format the cells in the daily columns and what formula to calculate 'Hrs. Worked'?
I need to calculate the hrs between two date and time and deduct any time outwith the hrs of operation (09:00-19:00), if the date and time falls outwith these times.
I have used the formula 24*IF(A2>G2,G2+1-A2,G2-A2), where G2 IS 21/04/2008 11:45 and A2 is 20/04/2008 00:22, but can't get it right.
For this example, A1 is the given at 19.875 I am trying to get A2 to net a result of 19.5. A2 is to net that result by searching through cells B1:B14 and finding the nearest equal or lower number. If A1 is less than 13.5 a result of "error" should be generated in A2.
B1=13.5
B2=15.5
B3=17.5
B4=19.5
B6=21.5
[Code]...
I have a spreadsheet used for calculating information based on the dates specific shifts are requested/cancelled by our clients. I have a formula for working out if a date & time of cancellation is less than 48hrs notice of the shift starting. This is because we have cancellation fees based on this.
What I have is this formula: =IF(A16="","",IF(INT(A16)-INT(G16)<2,1,"")) that returns a 1 if that shift is cancelled within 48hrs notice. This works fine but I have to now change the notice periods to the following:
72hrs+ - return 1
48hrs-72hrs - return 2
13.5hrs-48hrs - return 3
0-13.5hrs - return 4
edit this formula to take this into account? I figure it's using multiple IF's and changing the <2 into something else like the number of hours but I'm not sure of the exact syntax.
I have a list of times in a column. I'm looking for a macro that will go down the column and record all the times that lay between 5 and 7am, 1 and 3pm (13:00-15:00) and 8 and 10pm (20:00-22:00)
How to write it?
I have call data in date/time 06/07/08 2:00 PM custom format for a 2 month period. I have my regular opening times eg Monday 9-3, Tuesday 10-4. For each call I want to know if it was made during opening times or not.
View 7 Replies View RelatedIt's been several years sine I had to look at calculating amount of time worked.
Can you please look at this old spreadsheet of mine and verify that the formula is correct?
It appears to be ok to me, but I don't want any errors when it comes to paying my employees
Formula: ...