My formula is not rounding properly. Cells I4, J4 and K4 all filter from the results of cell I3 divided by 3. (e.g. 10/3 = 3.333) I was able to remove the decimals in cells I1:K3, but the between formulas (I4:K4) keeps adding the decimal back, therefore this results in errors to my chart.
View 4 Replies
Is there a quick way to remove the rounding formula from my spreadsheet of over 1000 cells with the formula? I would literally have to go to each cell and delete it since the formulas are not consistent in each cell so I can't just copy and paste the new formula from on cell without the rounding funcntion.
Is there a quick way to remove it?
My worksheet has a column full of numbers that are suffixed with "." and more numbers.
Example
Before After
135443.234 135443.23
456544.810 456544.81
435466.235 435466.24
654352.8 654352.80
I save my files as .txt. In the text files, the numbers appear preserved. But when they're opened in excel, they're rounded. If I format them as numbers with 3 decimals, the "#.8" becomes "#.800" which is no good. Oh, and the suffixes which end in a zero always end up losing the zero.
I've formatted my columns as general, number (with 3 decimals), and as text. That hasn't worked.
I've tried concatenating, separating the decimal from the suffix: =456544&"."&810
I've tried using the value formula to get get the cell value.
How do I write a formula to round the decimal places in a number in set increments. For example;
a) 14.28 to the nearest 0.25 would result 14.25
b) 1.99 to the nearest 0.1 would result 2.0
c)2.97 to the nearest 0.25 would result 3.00
I was trying to decrease the decimal places of the data figures that I'm currently working on my report, however, it keeps rounding-up the decimal numbers. I wish to keep the original numbers and just decrease the decimal places.
For example:
The original figure is = 7260.12903225806
Upon decreasing the decimal figures to just 2, the result became = 7260.13
Is it possible for me to just have this result = 7260.12 instead of 7260.13?
I've tried using the TRUNC formula butit does not work if the 2nd decimal value is 0.
For example:
The original figure is = 227161.905808985
Upon applying the formula, the result became = 227161.9 instead of 227161.90
I have columns of geological data in number form which may have about 4 or 5 decimal points. I want to reduce them to 2 decimal points without rounding the numbers up. Is there a simple way to do this?
View 4 Replies View RelatedI would like to round this number (3.5) to become 4, but by using this formula =CEILING(A1,0.5) the result will be 3.5
i need a formula that turns 3.5 to 4
when i use this formula =ROUND(A2,0.5), 3.5 becomes 4, but 3.2 becomes 3 not 3.5
i.e. a formula turns 3.2 to 3.5 and 3.5 to 4
I have a vba macro that takes data from one workbook and pastes it into another workbook. In doing this I have declared a few variables of type single (I only need two decimal precision). However, when I copy the values from the cells on the source workbook and paste them into the target workbook, the numbers end up having 12 decimal places. Ultimately, this extra precision causes my totals to be off by .01 or more after a while. I have tried rounding the number as I pull it off the source workbook into the variable, but that didn't matter. How do I solve this problem? Code for pulling data from source workbook:...
View 2 Replies View RelatedIf you look at the attached file in Column E line 47 you will see that it displays
373.97. However if you look in the formula bar it shows 373.9694. I am trying to make it so that the formula bar shows the same number as in the cell. Any idea on how to do this? I have tried everything I know how to do, which is not much.
I need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.
View 2 Replies View RelatedI have to make a excel document in which I have length and width in feet and inch format.
E.g. 10.01 in which 10 is feet and .01 is inch
I have all the length and width values in the above format. And what I want to do is convert the inch value (10.01) to feet value (.01=.08 feet) .
Just like the calculator here does.. [URL] ........
Like
10.01=10.08
10.02=10.16
10..03=10.25
...and so on...
Here is table of conversions from inches to decimal feet. But I don't know how to get a formula for this in excel...????
Inch Decimal of a Foot
1 inch 0.0833
2 inches 0.167
3 inches 0.250
4 inches 0.333
5 inches 0.417
6 inches 0.500
7 inches 0.583
8 inches 0.667
9 inches 0.750
10 inches 0.833
11 inches 0.917
12 inches 1.000
I have a number, eg, 1234567 and rounded to prepare the shrink of the size of the number like
= Round(a1, -3). I have, say now, 1234000.
I need to strip "000" from the number and place 1234 to a cell.
Is it possible to remove the display of the leading zero in decimal numbers of less than one in Excel 2007?
View 3 Replies View RelatedHow to make calculation in excel without decimal point automatically. I use this formula =MIN(360,30*F42/360) . Total displayed 144. By right 142
DAY
FORMULA
RESULT
BY RIGHT
361
=F12/360*30
30.08
30
365
=F13/360*30
30.00
30
365
=F14/360*30
30.00
30
366
=F15/360*30
30.08
30
269
=F16/360*30
22.11
22
=MIN(360,30*F42/360)
144
142
I have a section of code that build a single sheet workbook that incudes names and phone numbers to upload in to a web site.
The numbers are in internation format eg 4412345678987
The code works fine but when it saves as a CSV Delimited it round the numbers up so they end up 4412346000000.
I thought this was really easy and I swear that I did this before but I can't remember it at all. What I'm trying to do is take 2 user inputted dates and subtract them to get the total days. After that I divide it by 7 to get the total weeks. and ususally I will get a decimal. However I need to round this up to the next whole number.
View 9 Replies View RelatedI have obtained the following data which I need to put into a spreadsheet to import into an accounts program. I can't change the way I get the data which is as follow
Hrs worked Rate
05:55:00£30.00/Hour
07:40:00£21.00/Hour
05:45:00£30.00/Hour
What I need to have is 5.92 30.00
7.67 21.00
5.75 30.00 ie the time format in decimal and loose all the unnecessary symbols etc for the rate
I need to round up the answer of 1.72 to 1.73 for the formula listed. The formula in that cell reads as follows: =(22/12.762)
View 2 Replies View RelatedI have a column of numbers that represent sales prices.
If the price ends in anything between .x0 - .x4 I want the replacement number to be .x4 and if anything between .x5 - .x9 I want the replacement number to be .x9.
For example, the sales price is 1.93. The "rounded" number should be 1.94.
More examples:
3.76 = 3.79
3.13 = 3.14
2.50 = 2.54
I have an overtime spreadsheet where I calculate how mush I'm paying on vouchers, as they only come in lots to £5.00 I want to round the figure to the nearset £5.00, doesn't really matter if I overpay as it will even out next time, what's a basic forumula to work this out?
View 6 Replies View RelatedI have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
How can I drop the whole number part of a number and leaving only the decimal part of the number. Then multiply the decimal part of the number with a number. Then repeat this in a sequence. The object is to convert Lat and Long decimals to Hr. Min. Sec.
eg. 53.535663 .535663*60=32.13978 .13978*60=8 53 32 8
eg. 113.352640 .352640*60=21.1584 .1584*60=9 113 21 9
eg. 113.306579 .306579*60=18.39474 .39474*60=23 113 18 23
Suppose I have the following plan number (24) and I wan't to spread it across 12 columns, as evenly as possible but with respect to rounding.
Easy enough.. Each column receives 2...
Or say the figure was 24.6 and i wanted to round to 2 places...
Easy enough... Each column receives 2.05...
Or say the figure was 24.7 and i wanted to round to 2 places...
Easy enough... Each column receives 2.05... But one would be 2.06!
How about the number is 1 and say, the rounding is 0.1?
Ten of the columns would be .1 while two others (arbitrarily) would be 0.
I have a scenario where I calculate the size of a piece of process equipment, and then select the next highest size from a list of standard equipment that we supply.
I've managed to write an ugly brute-force solution to a relatively straightforward previous situation, but I'm reluctant to redo the entire exercise when I'm sure there's a more straightforward way of doing this.
An example of the problem:
We sell equipment in sizes 1, 3, 8, 12 and 25. I calculate that the piece of equipment theoretically needs to be size 19.6. I want a formula that will automatically generate the answer to this as 25. Similarly, if my formula shows a theoretical size of 12.01, I want the formula to state the actual size as 25.
My previous method of solving this was a series of nested ifs, searching for the rounded value of my formula output, then that value +1, then +2 upto a maximum of +5. This wasn't a pretty sight, but it worked for that situation.
Are there any other ways of solving this that are more elegant than mine?
I have a whole number value in cell F18. In cell F24 I want to enter a formula that allows me to divide the value in cell F18 by 4 and if the result is not a whole number, round it up to the next whole number.
View 2 Replies View RelatedI have a cell that returns a value...lets say "439". I need the cell to automatically round the number up to the nearest 25th. Like this:
439 would become 450
521 would become 525
551 would become 575
I'm using the following:
B23=IF(A23="","",DATEDIF(A23,I3,"y"))
Where:
A23 = a date of installation
I3 = TODAY()
B23 = a number of years
It currently calculates correctly if the number of years correctly if it's older than 1 year. If under one year, it yeilds 0. I would like B23 to show 1 if the current formula yeilds 0.
I want it to yeild a 1 if the current calculation is 0.
Windows 7 Ultimate / Excel 2010
This is what I have so far.
Code:
Range("L:L").Select
With Selection
Selection.NumberFormat = "General"
.Value = .Value =
.NumberFormat = "0.0"
[Code]...
The .NumberFormat = "0.0" is newly added and doesn't work.
We are trying to find the correct formula to round number to the nearest even number. In the attached example, 0.105 should round to 0.10 since the zero to the left of the five is even. If the problem was 0.115 then the answer would be 0.12 since the one to the left of the zero is odd.
I need a formula to take a number with several decimal places and round it up to two decimal places to either .33, .66 or, .00 if its above .66.
For example, 4.23423423423423 will be 4.33
4.43453453533434 will be 4.66
4.8353453453 will be 5.00
Lets say the number is in cell A1. What formula would do this?