# Calculate Decimal Portion Of Decimal Number`

Jun 10, 2007I need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.

View 2 RepliesI need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.

View 2 RepliesADVERTISEMENT

how do i get the numbers after the point.

View 9 Replies View Relatedtrunc gives just the numbers before the decimal point. how do i get the numbers after the point. original number minus trunc seems messy!

View 3 Replies View RelatedI have a vba macro that takes data from one workbook and pastes it into another workbook. In doing this I have declared a few variables of type single (I only need two decimal precision). However, when I copy the values from the cells on the source workbook and paste them into the target workbook, the numbers end up having 12 decimal places. Ultimately, this extra precision causes my totals to be off by .01 or more after a while. I have tried rounding the number as I pull it off the source workbook into the variable, but that didn't matter. How do I solve this problem? Code for pulling data from source workbook:...

View 2 Replies View RelatedI am looking for a formula that will calculate the number after the decimal point, for example: A1=0.4656162 I want to multiple the number after the decimal point by A2=60, is there a simple formula to enable me to do this as I have to perform this across a large number of cells.

View 2 Replies View RelatedBasically, I want to format a group of cells to display 1 decimal figure if the number is not a whole number. If the number is a whole number (or if the rounded first decimal place is 0) I want it to display no decimal.

View 9 Replies View RelatedI need to convert a column of numbers currently formatted with 2 decimal places e.g. 112.12 to 4 decimal places (without the decimal point). I need the end result to be 1121200. I've tried a few different suggestions given on the forum previously but can't seem to retain the 4 decimal places that I require.

View 4 Replies View RelatedI have to make a excel document in which I have length and width in feet and inch format.

E.g. 10.01 in which 10 is feet and .01 is inch

I have all the length and width values in the above format. And what I want to do is convert the inch value (10.01) to feet value (.01=.08 feet) .

Just like the calculator here does.. [URL] ........

Like

10.01=10.08

10.02=10.16

10..03=10.25

...and so on...

Here is table of conversions from inches to decimal feet. But I don't know how to get a formula for this in excel...????

Inch Decimal of a Foot

1 inch 0.0833

2 inches 0.167

3 inches 0.250

4 inches 0.333

5 inches 0.417

6 inches 0.500

7 inches 0.583

8 inches 0.667

9 inches 0.750

10 inches 0.833

11 inches 0.917

12 inches 1.000

I am trying to create a unique sample code by putting together the values of other cells that a user will input. It's all working well apart from the last part, where I am trying to include a decimal number. I want the decimal number to appear without the central "." and in a four digit format. e.g. 2.5 would appear as 0250, 14.25 would appear as 1425. This is the formlua I am using currently:

=IF(ISBLANK(B4),"",IF(LEFT(C4,1)="w",(B4&"-"&TEXT(F4,"YYMMDD")&C4&TEXT(G4,"HHMM")),(B4&"-"&TEXT(F4,"YYMMDD")&C4&LEFT(TEXT(H4,"00"),2)&RIGHT(TEXT(H4,"00"),2))))

However, where the value of H4 is 2.5, I am getting a result of 0303 (I've put this part in bold). I have attached a small spreadsheet to aid understanding.

I need a formula to take a number with several decimal places and round it up to two decimal places to either .33, .66 or, .00 if its above .66.

For example, 4.23423423423423 will be 4.33

4.43453453533434 will be 4.66

4.8353453453 will be 5.00

Lets say the number is in cell A1. What formula would do this?

I am trying to found or create a formula that will display cell width to the decimal place.

I can use the formula Cell("width"), but it rounds to the nearest integer. I need to display the decimals. For instance, if the actual column width is 8.43, the Cell("Width") formula will display 8. I need it to show 8.43.

I need to create a formula to calculate monthly hours worked (144.20) by hourly rate (£14.25). So far everything ive tried has given me awrong answer. I cant seem to make the total right. From what ive come up with (Not good) the total accepts the hours-just not the minutes.

View 8 Replies View RelatedI would like to enter whole numbers but have them convert to decimal. I have searched and found a solution, but it only references to one column and I need to reference other columns as well. I tried to edit but I’m not very knowledgeable with code. Here is an example of what I am looking for, columns E31:E52, F31:F52, L31:L52, M31:M52, N31:N52. Could someone provide a code to acquire these results?

View 9 Replies View RelatedI have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.

[URL]

I'm looking for a formula to break number in to decimal . Which means for 5 digits i.e 12555 to 12.5 and 4 digits i.e 1555 to 1.5

View 4 Replies View RelatedI am facing few problems with excel ever since I updated windows 8 to windows 8.1. Whenever i try to enter a decimal number in excel, say for eg. 3.4, it reformats to date- Apr03. I even changed the date and time formats for eg. short date is formatted to dd/MM/yy and long date to d MMMM yyyy. The format is set to enlgish (uk).. what should i do?

View 1 Replies View RelatedI am trying to figure out how to insert a decimal into a number. For ex: 1234 to become 12.34. I tried creating custom or special formatting but I cannot figure it out.

View 3 Replies View Related I am trying to format my lat and longs in order for Fusion Tables to be able to geocode them. I have it down to where I have separated the lat and longs into their own column. I started with this

>Point>-77.056124,35.552686,0.0

my long issues are -78.335,35 i need to get rid of ,35My lat issues are

434.011400

i need to get rid of the 4 in 434

I have column A which shows the quantity of a product that I have in stock

A1: 20

A2: 20

A3: 20

I also have column D which shows an increasing income, the amount of the increase varies daily but what I need to achieve is that every time cell D is greater than 50 then cell A4 should be the sum of A3 + the number of '50's that were in D3.

So in this example A4 would increase to 22 (because I can spend 100 on 2 items of stock) and cell E3 would show the balance. In this example its 7.35

D1: 18.23

D2: 42.84

D3: 107.35 E3: 7.35

I need a formula to take the numbers listed in cells D4:D50

If below 1,000,000 than just keep that number value

EXAMPLE DATA

If the Ten Thousands place is 5 or below leave the same if it is higher round up. (use this concept for ALL PLACE VALUES

1,500,000 to 1.5 million (if the rest are zeros)

4,000,000 to 4 million

1,564,535 than to 1.57 million

1,545,535 than to 1.54 million

1,555,000 than to 1.55 million

Same concept for the rest as the Millions (move the rounded place up as needed)

So for Billions it would be 10 Millions place (to round form) I think lol

1,000,000,000 to 1 Billion

1,500,000,000 to 1.5 Billion

1,560,000,000 to 1.57 Billion

1,578,000,000 to 1.58 Billion

1,700,000,000 to 1.7 Billion

I would like this to continue all the way up to place value 999 QUADILLION! (if possible) if the value can go bigger that would be great!

How do I seperate 1.2 and 1.02 miutes from the same column into Minutes and Seconds Correctly.

How do I get the first to seperate as (1) Min (20) Secs and the next to

seperate to (1) Min (2) Secs

I have 200,000 line of data in one column with times from .o1 mins to 1498.40 mins that I am doing this to. I need to convert it all back to seconds.

How can I drop the whole number part of a number and leaving only the decimal part of the number. Then multiply the decimal part of the number with a number. Then repeat this in a sequence. The object is to convert Lat and Long decimals to Hr. Min. Sec.

eg. 53.535663 .535663*60=32.13978 .13978*60=8 53 32 8

eg. 113.352640 .352640*60=21.1584 .1584*60=9 113 21 9

eg. 113.306579 .306579*60=18.39474 .39474*60=23 113 18 23

I want to show (in a cell) how much decimals there are after a comma.

View 9 Replies View RelatedIs there a way to format a number into 2 decimal places and when you select the cell you wont see the true value?

For example:

316.2696

I still see the 316.2696 when I click the cell. Instead of 316.27 only.

How to make a date into a decimal number. For example, Dec 14 I need to convert to 11.45

Its basically the number of months and days that have gone by in that calender year. So the 11.45 is "11 months" have gone by and the .45 is the days that have gone by in the month of December. (the 14th day divided by 31 the total in December = .45)

So another example would be Feb 3rd. My conversion would be 1.10 (1 month has gone by in the calender and 3 days into the month, 3 / 28 = .10 so Feb 3rd is now 1.10)

June 20th = 5.66

Im creating a form so that my employees wont have to hand write these anymore and reduce all the human errors. Its to calculate income for my borrowers. I want them to be able to enter todays date and have excel convert that date into the decimal form. Then they can enter a Year to Date $ amount and that will calculate a monthly income.

< $ amount * decimal date = monthly income YTD>

Some of my numeric values are with single decimals .....

Eg:

1542.2

9856.5

659855.9

2589.7

When I format in Excel with Number with 2 decimals my results remain the same

But the result which is need is:

1542.20

9856.50

659855.90

2589.70

I need to add a decimal point to a column of numbers. For example, where it says 126 needs to be changed to 1.26, 3035 changed to 30.35, 13593 to 135.93 and so on. Can this be done automatically or with a formula?

View 2 Replies View Relateda1 -> 2.333.33 "i want this to return as 2,333.33"

a2 -> 33.33 "i want this to retun 33.33"

a3 -> 45.555.55 "i want this to return 45,555.55"

i already asked this question and someone gave me this code -> substitute(a1,".","",1) which return to 2333.33 but the problem is for the a2 if i use the code it will return as "3333" which read as "3,333".

Is there any way that we can determine if the values have two decimal point before it will run the command?

I have a few cells that contain decimals that do not appear as decimals. If the number is 50.1, it only shows up as 50 in the cell. I've tried formatting it to a number with 2 decimal places and to scientific and when I do that the number displays as ##. When I do general formatting it only appears as 50.

I used a formula to pull the number into a different cell, however, and in that cell it shows up as 50.1.

Is there anything I can do to make it show up as 50.1 in the original cell?

I have a small issues with number formatting

I need to combine text and a number

- Ex Water - 13

The issues that i have is that when i do this excel adds decimals - Ex Water - 13,2

How do i avoid this using number formatting?

Copyrights 2005-15 www.BigResource.com, All rights reserved