Run-time Error '1004' Pastespecial Method Of Range Class Failed
May 22, 2007
I am using the following code and I'm getting a Run-time error '1004' error. When I reconstruct the macro one line at a time and run the macro between adding each new line - no error. After reconstructing the macro in its entirety, I can run it once with no error. However, if I try to run it again immediately after that, I get the error and I keep getting the error every time I run it from there on. I dont understand how it can work once and then stop working. Here is the full
Dim item As Long
Dim myString1 As String
Dim myString2 As String
Dim myString3 As String
item = InputBox("Please Confirm The Row Number Of The Child To Be Moved To The Roster.")
myString1 = "c" & item & ":e" & item
myString2 = "g" & item & ":n" & item
myString3 = "c" & item & ":e" & item & ",g" & item & ":p" & item ..........................
1.) I have excel 2007 and when I recorded the macro yesterday it worked just fine, but today it's coming up with the box to update values. The macro is set to open up the vendor assignment sheet and do a vlookup against the clerk and then return the information to the original sheet and then copy paste special values. 2.) Today it's also doing the calculating thing in the corner using 2 processors which it has not done before. 3.) Run-time error '1004': PasteSpecial method of Range class failed.
[code]' Keyboard Shortcut: Ctrl+r ' Dim OriginalSheet As Workbook Set OriginalSheet = ActiveWorkbook Columns("B:B").Cut With Columns("A:A") .Insert Shift:=xlToRight End With
I found the following code on your forum, but get the following error:
Run time error '1004'. Autofill method of Range class failed.
The error occurs when the spreadsheet either have 1 row of data completed or no data, can I get code to ignore the autofill when I only have 1 row or no rows completed in various spreadsheets. I have attached a copy of the spreadsheet.
I have a userform that allows the user to view, modify or delete individual records (rows) of a worksheet in a workbook. If a particular item in a record is modified, a check occurs to ensure that the values for that item remain unique. All of that works exactly the way I need. The breakdown occurs when the records are then autosorted by a the values in a particular column. After the autosort, another column of values is copied and pasted to a different worksheet within the same workbook. For this to work properly, I must have the userform open along with the worksheet containing the records. If the userform is open with any other worksheet open, I get the following VBA error message "Run-time Error '1004' : Slect method of Range class failed". I need to be able to open the userform with any worksheet active and not experience this error when the autosort, copy/paste occurs. This is the code for the user form, the module for autosort, copy/paste and checking for unue values.
This is the sub in the worksheet with the records
'This checks for unique values Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim LLoop As Integer Dim LTestLoop As Integer Dim Lrows As Integer Dim LRange As String Dim LChangedValue As String Dim LTestValue As String Dim smessage As String 'Test first 7 rows in spreadsheet for uniqueness Lrows = 8 LLoop = 2 'Check first 7 rows in spreadsheet While LLoop <= Lrows.........................
I have a pretty simple macro that I recorded and attached to a button. The macro is: Sub Paste_Data()
Cells.Select Selection.ClearContents ActiveSheet.PasteSpecial Format:="Text", Link:=False, DisplayAsIcon:= _ False Range("A3").Select End Sub
The user opens the file that contains this macro, then runs a report from a website that dumps into an excel file. They copy the data from the Book1 output, then click the button to paste it into the template. If done this way, it works fine.
However, if they run the report and get Book1 THEN open the file containing the macro, they get a run-time error 'PasteSpecial method of Worksheet class failed' on the 'ActiveSheet.PasteSpecial... line
Newcomer to Excel 2007 but long time programmer for Excel 2003. I am having problems with code that I feel should work. Code fails at the Select command with a "Run-time error '1004': Select method of Range class failed:
I'm attempting to write an OutLook 2007 macro that extracts excel spreadsheets from incoming email and saves them as a .csv file. Before saving the file I need to delete the header row. I am getting a "Error 1004 - Delete method of range class failed" error when running this code.
Here is the code: (the bolded line is where I'm getting the error)
Public Sub ConvertToCsv2() Dim xls As Excel.Application Dim oWB As Excel.Workbook Dim tmp As String Dim ws As Excel.Worksheet
When I run this code I get a run time error 1004, copy method of range class failed, I have an autofilter on and it is showing 5 rows, the 5 cells in column A of sheet2 gets copied to sheet1 OK but I get the error?
i added a "Microsoft office spreadsheet 11.0 " object using additional control and used it in my form of Excel Macro. then i added some data from the combo box to the embedded excel object dispalyed. the form displays correctly and am even able to add data to cells.
but am not able to sort a column. gives me the error message "Sort method of range class failed" have tried to make sure the sheet is active using the ".Activate" with the object name. this is the only solution available on the existing forums.
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code: Sub colfrmadd() Range("A1").CurrentRegion.Select colcnt2 = Selection.Columns.Count
I have written some code to move data from one sheet to another. Since the from sheet has formulas, I use the PasteSpecial command. I have used code like this for years, and all the sudden, this starts breaking. And, here is the fun part, I run the code and it works sometimes. I never know when it will fail. It is so random. This is killing me. I have tried to create objRange object and assign them and it works sometime and fails others. Also, I tried adding the line Worksheets("Daily Dashboard"). Range ("C72").Select before the first PasteSpecial as to select the cell first before pasting. Then I get the "Select method of range class failed". Lastly, I tried copying the code from behind a worksheet into a new module. The code is triggered by a button on the first worksheet. Still fails.
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
I am trying to build a macro which will format the columns of a spreadsheet - basically it inserts some columns, writes formulas and highlights them. Here is a code I have got so far...
When I try to run this I get a run time error 1004 - Method 'Range' of 'Object'_Global' failed. The part of the code Range("N2:N").FormulaR1C1 = "=(RC[-7]/RC[-2])"
is highlighted in the debugger.
Can anyone tell me why this is happening, also it would be great if you could suggest better ways of writing this code - as I am new to vba programming and most of my macros are built using the recorder and then 'working' on them.
I have an interesting error that only happens when there is one row of data in the worksheet (sheet2 or "Half Payout"). Rows 1 & 2 are headers, row 3 is when the data starts - if any. With either no rows of data or more than one the coding works just fine. Here is the exact error message I'm getting: Run-time error '1004': Method 'Range' of object '_Worksheet' failed.
The following code is supposed to sort the rows of data when opened and then activate the first open cell below B2.
I am trying to create a macro in my personal macro book such that whenever any workbook is opened the calculation settings (tools, options, calculation tab) are set to semiautomatic and do not calculate before save. The macro works when I am opening Excel itself (Book1) but when I open an already saved file it gives me
Run-time error '1004'
Method 'Range' of object'_Global' failed
From there I choose Debug, the VBE window comes up, and I hit F5 to continue the code without doing any actual debugging. Here is the code that I am using. This is in the Personal Macro book on the "This Workbook" section....