I need some code that will find the column with the header of "Gender" and change the values from "M" and "F" to "Male" and "Female" but I keep running into issues.
I want to use a Select Case statement so I can set all other found values as blanks.
I'm trying to write a simple VBA code to loop through values in the range A14:A138 and based on the value (of a possible four values) in any row of that range, populate the adjacent column in the same row with a conditional result. For example if A14 = "Cat", then B14 = "I"; if instead A14 = "Dog", B14 = "II", etc. If there is no value in column A, the result should be blank (i.e. "").
I believe are in coding the destination range since I can get it to work for just one cell in B! Below is my code that is not working...
[Code].....
I'm trying something interesting with Select Case where instead of using a static Case, my Case is based on the value of a cell.
here is the example of the present code:
Code:
Select Case Range("F75").Value
Case Is > Range("F30").Value
Range("AB59").Value = "Use"
[Code].....
I've been through the forum and I've got my VBA to check that columns 37, 38
and 40 are entered if column 2 = 'O'. However I just can't get it to exclude column 39 from the check! Is there a way of getting Case Else to do this or should I use an Array?
Dim rCell As Range
Dim strMessage As String
Dim RowCounter As Integer
Dim ColumnsChecked As Integer
For Each rCell In Range("B14:B5000")
RowCounter = rCell.Row
If rCell = "O" Then
For ColumnsChecked = 37 To 40
If Cells(RowCounter, ColumnsChecked).value = "" Then
Select Case ColumnsChecked
Case 37
strMessage = "COMMENTS"
Case 38
strMessage = "INVOICE NUMBER"
Case 40............................
I've got a pretty intense macro already written, a lot of Select Case components. At the end, if nothing matches I'd like to just copy the cell above to the cell below. However, there is a range of about 400 cells in length, so I'd need some sort of wildcard for range.
Rows("2:2").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Dim Cell As Variant
For Each Cell In Range("A1:OL1")
Select Case Cell.Value
Case "Eng1"
Cell.Offset(1, 0).Value = "Engine One"
tons more in the middle here
Case Else
Cell.Offset(1, 0).Value = "N/A"
Rather then returning "N/A", how could I reference the cell above and just copy it instead?
How can I make this code fire for column 2 AND column 3?
View 2 Replies View RelatedFor the following code, I'm getting the " Case without Select Case" error (On Case 3 to 5...assuming more are wrong too, but debug can't get there yet). I thought I had it right, obviously don't. Can anyone spot how my code is wrong? ....
View 9 Replies View RelatedI am making a worksheet that I intend to use to track my money. When I first open the worksheet, it opens on a tab where I can click a button to report a type of transaction. For example, if I make a withdrawl from the bank for $50, I click the button, it takes me to the sheet that tracks my bank-related stuff, selects a cell and opens up a form, at which point I type in what the transaction consisted of. However, the sheet also tracks what is in my wallet, so I'd like to finish reporting the bank transaction in the form, and have a button to click that reports the wallet part automatically.
So, essentially what I need to do is select several non-contiguous cells that are in the last row of the bank sheet, copy them, switch to the wallet-tracking sheet, and paste them in a row that is one past the last row of that sheet. The paste should keep the cells next to each other, even if they were non-contiguous when they were being copied.
I have a series of data and want to create a chart looking like this
Google Image Result for [URL] ...
Where it shows min/max on the error bars, quartile 1/3 on the box and median as a scatter plot. My data is a simple table
Group
Amount F
Amount M
Median F
Median M
Median F+M
[Code] ....
Here F = Female, M=Male and the chart should show all calculation for both gender together (I have another thread up where the gender are separated with the Title (How to create a stock column chart with error bars?? (Both gender separated))
Suppose I have some data in a column like below
Blue
Red
Green
green
red
RED
BLUE
I need a macro or excel formula so that it will remove duplicate products- case sensitive(removing all duplicate prod using using excel,that i know.) i.e. it should not consider Blue BLUE as duplicate. only consider Blue Blue as duplicate.
So the macro should work same as data -> remove duplicate function already exists in excel, except it will be case sensitive..
Here's an example of what I need..
I want to
A B
2.5 corn
4 corn
7 green
2 green
I'd like a macro to find all corns, add up the column A for each corn and place the sum beside the last corn in column C
Then do the same with green, etc.
I'm looking to use Excel to finding partial text In the case of more than one match
I used the following formula in cell C12:
=IFERROR(INDEX($C$2:$C$8, SMALL(IF($B12=$B$2:$B$8, ROW($B$2:$B$8)-MIN(ROW($B$2:$B$8))+1, ""),COLUMNS($B12:B12))),"")
But it's work only 100% match word not by partial text.
I have a graph which is reading from a table. This graph is reading flows from a flow meter, but after reading data for over an hour the graph gets really squished. I'm looking at creating another graph with just the last 50~ values from one column. Is there a way I can create another table that only reads the last 50 values from one column?
View 6 Replies View RelatedI have two columns. One column has UPCs - some of which are duplicates. The second column just has number values. I'm trying to add the sum of all of the numbers in column two which are attached to their respective UPC. For example,
COL A///// Col B
11111111111///// 10
00000000000///// 15
11111111111///// 10
11111111111///// 4
00000000000///// 2
So, I need a third and fourth column to give me the total value for a single SKU(col A) of all the values in col B. In this example the Third column would contain the SKU, and the fourth column would contain the sum of all values in column B that are associated with the single SKU in column three. The third and fourth column would look like this:
COL C///// COL D
11111111111///// 24
00000000000///// 17
I have an excel sheet with about 1000 reference numbers in. I would like to know how many of these are unique...they look like this:
UCR104
UCR1042
UCR1043
UCR1048
[Code] ........
I want to fill up specific text to cell according to values in columns before. I wrote this, but it doesn't work:
Sub test()
Dim Lastrow As Long
Lastrow = ActiveSheet.UsedRange.Rows.Count + ActiveSheet.UsedRange.Rows(1).row - 1
Dim i As Long
[Code].....
I have the following:
Column A---------Column G
EACH-------------(Formula = (B1*C1)*.4536
CASE-------------(Formula = (B1*C1)*.4536
SHTB-------------(Formula = (B1*C1*D1)
SHTD-------------(Formula = (B1*C1*D1)
MFG--------------(Formula = B1*C1)
NO---------------(Formula = B1*C1)
I need a macro that when the worksheet is open if the text in Column A is as presented in the sample then the Mathmatical calculations will be performed in Column G. Currently I use a Do While Loop which works (takes a long time), but I know there must be a faster more efficient way.
How to I change this code to use 'select case' instead of using IF? I have about 20 more if's and I though select case may be easier . .
'20
If ComboBox8.Value = "20" Then
MyPlace.Formula = "=IF(OR(RIGHT($AU16,2)=""ge"",COUNTIF(X16:aq16,""X"")=20),""Reject"",""Accept"")"
End If
' '19
If ComboBox8.Value = "19" Then
MyPlace.Formula = "=IF(OR(RIGHT($AU16,2)=""ge"",COUNTIF(X16:ap16,""X"")=19),""Reject"",""Accept"")"
End If
' '18
If ComboBox8.Value = "18" Then
MyPlace.Formula = "=IF(OR(RIGHT($AU16,2)=""ge"",COUNTIF(X16:ao16,""X"")=18),""Reject"",""Accept"")"
End If
Any way to search for a value down column A, another value across roW 1, and tells what value lies in the cell at their meeting point. 4 example, I'm looking For "47" somewhere in column a, and also the number 53 somewhere in row 1, and I need to know what value is in the cell where those to meet.
View 1 Replies View RelatedI have a report and users will need to key in password while opening. Currently, i am using inputbox and it works exactly like what i expected. However, the only downside is that i cannot mask the password.
I am aware that I have to use userform to do so. How to replace the input box with userform and still deliver the same result.
I know how to create a user from with title, text box, OK and Cancel buttons, and that's it. How to put it in my current code.
Below are the codes that I currently have. There are 4 possible outputs.
[Code].....
Select Case Condition Not Being Met
View 4 Replies View RelatedI don't see what I am doing wrong in this code using "Select Case". When activated and the correct string is entered I should get a msgbox pop up.
View 8 Replies View RelatedI seem to be unable to crack the bug in my macro... I want to define 2 variables before launching the next macro with the defined variables.
When I run this macro - the debugger points all the time to the following line: ...
Is there any difference between these 2 codes:
View 12 Replies View RelatedIf i have a case select say like this
View 4 Replies View RelatedI was wondering if any one can help me with simplifying my Select Case, i have provided 3 examples , 101 , 102 and 103. I will be going all the way from 101 to 199 and I dont want to write every single one. and note that the range values change for each one as well.
View 14 Replies View RelatedI'm creating a small spreadsheet for client data in Excel and I want it formatted a certain way, I did consider data validation but it proved to just be annoying.
I've been working on some VBA code to automatically change whatever text is typed into a cell to the correct case (ucase, lcase or proper) and while I can get it working for a single range of cells getting it to work for more is proving difficult.
If there is a different way, like to select the value in the selected range and cross reference it against a list. i'm not sure... trying to learn and be efficient.
View 3 Replies View RelatedHow do I loop a select case so that it ends at a specific cell.
View 14 Replies View RelatedI have a multiple condition and i try using Select case rather than If else. However i try to combine Select case with Like operator but it's not running as it should.
Code:
Sub SetHeader (FuncName as String)
Dim xSheet as Worksheet
Select Case FuncName
Case Is = "_EXCRT"
Set xSheet = Activeworkbooks.Sheets(FuncName)
[Code] .........
This code running good with first case but it will not goto second case even the FuncName string are : "_MB51_00" or "_MB51_01".
