I'm not to familiar with macros or VBA so I hope someone can help me out with this.
I have 2 worksheets in this workbook. I want to select the range A2:K3 (or better yet, the first 2 data rows); the first row 1 contains column headers.
Then copy those two rows.
Next, select everything else in the worksheet and then Paste Special>Formats
Then select cell A1 (just to give the active cell a place to rest) and then do the same to the second worksheet.
Then save the workbook.
My code below is pretty much a recorded macro. I'm basically wanting to change this macro to be expandable as the worksheet grows.
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook Copy range (c8,d69) Close work sheet Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
copy content from particular cells in the current sheet to the next available row in another sheet. I need to Paste the Values as the cells I am copying are equations. It was working great until I tried using it again today. For some reason I get the following error:
Run-time error '1004': Unable to get the Select property of the Worksheet class
Here is my code:
Code: Sub CopyCampaignMetrics() Range("A2:E2").Select Selection.Copy Sheets("Sheet2").Select("A" & Rows.Count).End(xlUp).Offset (1) Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
How would the code be changed below to be Paste Special Value? The numbers copied are changing every few seconds and I want a snapshot of it.
im TheRow As Integer Sheets("Loader").Range("C5:AC5").Copy TheRow = Sheet2.Range("A100").End(xlUp).Offset(1).Row If TheRow < 6 Then TheRow = 6 Sheet2.Cells(TheRow, 3).PasteSpecial If TheRow = 6 Then Range("B6").Value = 0 Else Cells(TheRow, 2) = Cells(TheRow - 1, 2) + 1 / 24 Cells(TheRow, 1).Value = Date ActiveWorkbook.Save LastSoon = Now + 1 / 24 '1 hr from last time Application.OnTime LastSoon, "Capture" 'set up for next hour
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range) 'If you have any worksheet to exclude If Sh.Name = "Sheet2" Then Exit Sub With Target If Len(.Value) Len(Trim(.Value)) Then
MsgBox "You just entered a leading space character in" & vbCrLf & _ " cell " & .Address(0, 0) & "." & vbCrLf & vbCrLf & _ "If you intend to delete the value in that or any cell, " & vbCrLf & _ "please press the Delete button on your keyboard.", 16, " No leading spaces allowed !!"
Application.EnableEvents = False .Value = Trim(.Value) Application.EnableEvents = True End If End With End Sub When I tried to Copy>Paste Special > Formats or Values of more than One row this line highlights
If Len(.Value) Len(Trim(.Value)) Then That is, if I select C3:Q3, Copy, then select C10:C15 and try to do a Paste Special that is when it gives me an error 13: Type mismatch.
If I just select C10 and do the Paste Special, it's just fine.
I am trying to write a VBA code which will add any figure (say X) to the visible cells in the selected range. I am mentioning the visible part becuase my data might be filtered and thus. So far I have been able to figure out the following code(by recording a macro and then going behind the scenses to see the code):
Sub Add_X() Selection.SpecialCells(xlCellTypeVisible).Select Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlAdd, SkipBlanks:= _ False, Transpose:=False[/color] End Sub
The problem is that how can (if possible) I can pass a parameter to the above code (which will be X; as explained above). There might be many possible solutions??? However one that comes to mind is that when I selected a range of cells and then run my code, a dialog box should pop-up and ask for a # and then then take that # to add it to the visible cells of the selected range.
I want to select email addresses in a particular cell. Since every email address will contain @ so I want to extract the email address from the cell on the basis os all the characters to be selected on the left & right of the '@' before a space is encountered.
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
I have a macro that copies the main report sheet in my workbook. The point of the macro is to get a copy of the report data without allowing anyone to see the formulas/data behind it - when it pastes, it pastes only the values in the tables and then copies the charts, deletes the live ones, and pastes only the images back on the sheet. The macro works on my computer and my partner's computer, but not on anyone else's. It stops at this point:
During the execution of some code I come to a point where the properties of a range of cells needs to be converted to numeric (is at that point text). Normally I do that by adding a 1 in an cell nearby and use the copy/paste special method.
I was wondering if I can do that in a different way. Is it possible to define a MultiplyFactor as 1, and use this in paste special part.
I've got a sheet which has two column headings - Resources and Cost. I have another sheet which has the calculations for both of these. They are in cells H24 and D29 of the second sheet. I want to have a macro on the second sheet that if I click it, it will paste special these two figures (values only so no formulae), into the active cell on the first sheet. This is the code I've got so far but every time I run the macro it just pastes into the same two cells in the first sheet.
In the new 2007 version , can a specific hot key be created to perform Past Special Values? This key assignment was available in 2003, but we can't find it in the new 2007.
Paste Special is no longer available in the Edit menu--it's grayed out. (I am using Excel 2003). I can't find any info on what disabled it or how to re-enable. It's probably something moronically obvious, but this moron needs a shove in the right direction.
