Set Date In Table Cell To Be Date In Another Cell Plus 30 But Leave Blank If Other Cell Is Blank

Nov 19, 2013

I have made a table which contains 2 date columns, Both formatted as date (dd-mmm-yy), the second column is calculated as the first column, + 30, The dates work out fine when adding to a date in the first columns, but from a blank cell it displays 30-Jan-00.

e.g
Started
Finishes

12-Nov-13
12-Dec-13

30-Jan-00

09-Nov-13
09-Dec-13

11-Nov-13
11-Dec-13

Rather than delete the rows with the blanks in the Started column, is there a formula that I can use so that the cells in the "Finishes" column is left blank when the "Started" cells are blank?

The current formula for cells in the "Finished" column is:

I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.

I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.

I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).

I am trying to alert our purchasing mgr when order dates are approaching or not meeting our project deadline.

As of now i have the following rulesif order date is due today or past due - redif order date it greater than project date - redif order date is due within 2wks - yellow

Now all I need is a rule where there is an order without a due date but the project deadline is within 2wks (yellow) and past due or due today (red)

I have a 'Total' Cell (I23) that has the following Formula: =IF(SUM(D23:H23)>0,SUM(D23:H23),"")

But I would only like the formula to 'work' if another "Total" cell (I57) further down the sheet is Blank.Therefore if Cell I57 has a value, the Cell I23 is left Blank.

I'm want this formula, =IF($C30="Y",$A29+1,""), to leave cell A29 blank if cell C30 doesn't have a "Y" in it. If cell C30 does have a "Y" in it then I want to add one day to cell A29. Cell A30 should return 28-Feb, but in stead it returns 0-Jan.

************************************************************************>Microsoft Excel - 2007log.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA26B26A27B27A28B28A29B29A30B30C30A31B31C31A32B32C32A33B33C33= ABCD2624-FebSat**2725-FebSun**2826-FebMon**2927-FebTue**300-JanWedY*310-JanThuN*320-JanFriN*330-JanSatN*Feb* [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.

Probably a simple method that i have not tried. I have a table where some cells are populated with #N/A. I am trying to work out a formula in another cell saying if the cell that contains #N/A then leave this cell blank.

Workbook has the possiblities of 366 tabs at the bottom, but for a normal calendar year will only have 26.

The tab name is the ending date of the pay period without the year. So for Feb 25, 2007 the tab would be named 0225

On a yearly calculations page I am simply trying to say IF TAB 0225 exists then cell equals '0225'!A2 otherwise the cell should be blank.

I tried this, but gets a reference failure instead of putting nothing...

=IF('0102'!A2=0,"",'0102'!A2)

In this example the possible tab name would be 0102. If the tab exists, everything works fine, but since in this case it doesn't, I get a reference failure. #REF!

I NEED the result to be empty if the tab doesn't exist.

Any idea would be helpful. I'd rather not have 366 tabs when only 26 are needed for any calendar year.

I am creating a worksheet for my buisness and I have input date of birth and have done a formula to work out ages but I dont know how to hide the formula and leave the cell blank so that when I create new information it automatically puts the age in.

I'm using a formula that I got from a previously made excel sheet. The formula does what I need it to do and looks like this: =INT((D10-10)/2)

The problem is, if I don't enter a number in the cell D10, all the cells with this formula show -5.

If I don't want data entered into D10 yet, I'd like all the cells with that formula to be blank until I actually enter a number in D10.

I think it has to do with using an IF statement followed with ""? Am I on the right track?

Also, if I have other formulas like =SUM(AP3:AQ6), but the cells it refers to are blank, how can I make the cell with the formula also be blank rather than show a 0?

I know I can turn off the "Show a zero in cells that have zero value" option, but I was wondering how to do it with the formula instead.

I'm using a formula that I got from a previously made excel sheet. The formula does what I need it to do and looks like this: =INT((D10-10)/2)

The problem is, if I don't enter a number in the cell D10, all the cells with this formula show -5.

If I don't want data entered into D10 yet, I'd like all the cells with that formula to be blank until I actually enter a number in D10.

I think it has to do with using an IF statement followed with ""? Am I on the right track?

Also, if I have other formulas like =SUM(AP3:AQ6), but the cells it refers to are blank, how can I make the cell with the formula also be blank rather than show a 0?

I know I can turn off the "Show a zero in cells that have zero value" option, but I was wondering how to do it with the formula instead.

A1 has a date of 03/10/07 B2 has formula =A1 + 7 I want to copy that formula down the column B2 but if B3 is empty I get 01/07/1900 How Do I make so that if there's no date entered in A column I get blank cells but still retain formulas, I've been running into this issue with other formulas but I couldn't find any solution searching this forum,

I'm trying to create a worksheet to automatically make a football league table update once results are entered. I have entered a formula using the "IF" function which compares scores and then awards points. However before a game is played and the cells are left blank, the formula detects this as a "draw" and awards a point. how to prevent the formula operating until a result is entered?

I have a column that indicates the earliest date that a project will start. There is a Project Minimum Date, Activity Dates, Sub Activity Dates and Sub Sub Activity Dates.

When a Sub Sub Activity Date is entered, it goes up to the Sub Activity Date and so on.

I have a formula =SMALL($E6:$E224,COUNTIF($E$6:$E$224,0)+1) that will select the earliest date out of the sub sub activities and sub activities but if one of the cells is blank in the sub activity or activity, then a #NUM! error is returned.

I'm trying to set up my formula so that if there is no criteria match, rather than returning 0 it leaves the cell blank.

(I recommend skipping the below text and just opening the attached spreadsheet, instructions/what I'm looking for and trying to achieve and well laid out requirements and examples are in the spreadsheet and much more thoroughly explained then I can do below)

I'm setting up a table that grabs data from columns in a raw data spreadsheet.

For the purpose of the table I'm making, the formula needs to match up both the House, and the year/month from the raw data sheet, then if the two match and are side by side, return the value to the right either in the Plan Field or the actuals field depending on which field in the table the formula is in. If there is no entry or matching criteria for both the house and Month then it should leave the cell blank, not show a 0

So I have a SUMIFS formula that I'm trying to set up so that if there is no criteria match it leaves the cell blank.

So =SUMIFS(sum range, criteria& range, criteria&range), if no matching criteria can be found, leave cell blank, else if matching criteria found then return value from the sumrange.

Yeah kind of hard to follow, so attached is a very detailed and well laid out spreadsheet showing the example of what the formula is, how it's working/what it's returning and an example of what i want it to return/look like, so please check out the spreadsheet, it explains it a million times better.

Essentially though i want the formula set up so that if there is no criteria match, rather than returning 0 it leaves the cell blank.

I have a column of data that requires the cell to be blank if the value is 00/01/1900. The data is linked to another cell. IE: cell E3 is linked to cell $D$3 The cell is formatted for dates in the format shown.

I have a date range, containing blanks and values. I need a function to show the earliest date that contains a non-blank value. The function should be robust enough that I can sort by date and still show the correct data.

I have a formula in my spreadsheet that shows dates for servicing of products. Column F show's Date Last Serviced and the adjacent column (G) then shows Date Next Service. When there is nothing on the F column's cell then the date that appears on my spreadsheet is 31/12/00. It looks messy and I would rather have a formula to make it so that if the F column is blank, then the adjacent cell in G column should stay blank also.

To automatically calculate the next service due date, I have variants of this formula that creates the dates in G column:

I was trying to use a modified version of JBeaucaire's code to achieve the same results within my form. In my workbook I have a a table (called Table27) that ranges from A7:CL109

This is the code I'm attempting to use:

[Code] .....

Column A is where my target cells are... where the user will enter data. In cell CI (the 87th column) I want the Data & Time stamped.

I thought I'd modified the formula correctly, but I can't seem to get it to work.

I need a formula for identifying the last cell, of every third cell, that has an numeric entry, of a row. For example, in a range of (F7:V7), I need a formula that examines F7,I7,L7,O7...., and displays the last cell that has a numeric entry, while ignoring the other cells, ie G7, H7, J7, etc.

A - Date last checked B - Due Date C - Actual Date checked

Currently column B is formatted to Date and simply has =A+84 and will display a date 3 months in future. However if there is no date in column A, then column B displays a default 1900 date.. Is there a way of making this blank if there is no date in col A?

Using one spreadsheet with three date columns and two columns counting days.

If there is a value in Resolution date, then Column N is blank If there is no value in Submit date and Resolution date, then Column N is blank If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval

Created on = J4 Submitted on = K4 Resolution Date = L4 Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4) Days Pending Approval= N4 (cell with formula)

If Resoultion Date L4 has a value, return blank If Submit on K4 and Resoultion date L4 are blank, return blank If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval

Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4 Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval 4/5/13_______blank______Blank____________Blank___________Blank 4/5/13_______4/5/13_____4/7/13___________2_______________Blank 4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4

I would like to highlight (conditional format) the "response required by" (Row A) cells / dates if the "current date" (cell $B$2) is exceeded AND if the "response provided By" (Row B) remains BLANK:

how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.

I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.

CREATE TABLES LIKE BELOW?Column A Column B Column C

March 1, 2008Saturday March 2, 2008Sunday March 3, 2008Monday March 4, 2008Tuesday March 5, 2008Wednesday ...................