I am trying to loop through and read values from 4 combo boxes which I have renamed SaveOptionBox1 to 4. They are ActiveX controls. The code throws no errors but I can't output the values of my array 'dirname' on the sheet to prove it worked.
Code:
Sub Directory()
Dim ROOT_PATH As String
Dim cnt, dirnumber As Integer
[Code]....
How do I loop a select case so that it ends at a specific cell.
View 14 Replies View RelatedI have a subroutine involving a Select Case and a loop.
I am of the opinion that writing the loop within the Select Case would be faster than having the Select Case within the loop.
Am I correct or does it not make a difference?
I am learning about Case Select-
I want to loop through every cell in col. V the range of
i = 6 to LRow
and find any value that equals 13, if it equals 13 then the value in (i,"W") will be "True"
I've got a pretty intense macro already written, a lot of Select Case components. At the end, if nothing matches I'd like to just copy the cell above to the cell below. However, there is a range of about 400 cells in length, so I'd need some sort of wildcard for range.
Rows("2:2").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Dim Cell As Variant
For Each Cell In Range("A1:OL1")
Select Case Cell.Value
Case "Eng1"
Cell.Offset(1, 0).Value = "Engine One"
tons more in the middle here
Case Else
Cell.Offset(1, 0).Value = "N/A"
Rather then returning "N/A", how could I reference the cell above and just copy it instead?
For the following code, I'm getting the " Case without Select Case" error (On Case 3 to 5...assuming more are wrong too, but debug can't get there yet). I thought I had it right, obviously don't. Can anyone spot how my code is wrong? ....
View 9 Replies View RelatedI have written the following code. I've made the code that works look like a comment. The code should delete rows 1 to 4; Insert a column and in column B sum the row to the right. Right now B1 is correct but it stops there. I've tried coding this as an if then else statement and the same thing happens.
Data:
A
B
C
D
E
F
G
B206
5
1
1
1
1
1
[Code] .....
VB:
[SIZE=2]Sub GetFlyingDays()[/SIZE]
[SIZE=2]Dim Names As String[/SIZE]
[Code].....
I want to fill up specific text to cell according to values in columns before. I wrote this, but it doesn't work:
Sub test()
Dim Lastrow As Long
Lastrow = ActiveSheet.UsedRange.Rows.Count + ActiveSheet.UsedRange.Rows(1).row - 1
Dim i As Long
[Code].....
I have the following:
Column A---------Column G
EACH-------------(Formula = (B1*C1)*.4536
CASE-------------(Formula = (B1*C1)*.4536
SHTB-------------(Formula = (B1*C1*D1)
SHTD-------------(Formula = (B1*C1*D1)
MFG--------------(Formula = B1*C1)
NO---------------(Formula = B1*C1)
I need a macro that when the worksheet is open if the text in Column A is as presented in the sample then the Mathmatical calculations will be performed in Column G. Currently I use a Do While Loop which works (takes a long time), but I know there must be a faster more efficient way.
How to I change this code to use 'select case' instead of using IF? I have about 20 more if's and I though select case may be easier . .
'20
If ComboBox8.Value = "20" Then
MyPlace.Formula = "=IF(OR(RIGHT($AU16,2)=""ge"",COUNTIF(X16:aq16,""X"")=20),""Reject"",""Accept"")"
End If
' '19
If ComboBox8.Value = "19" Then
MyPlace.Formula = "=IF(OR(RIGHT($AU16,2)=""ge"",COUNTIF(X16:ap16,""X"")=19),""Reject"",""Accept"")"
End If
' '18
If ComboBox8.Value = "18" Then
MyPlace.Formula = "=IF(OR(RIGHT($AU16,2)=""ge"",COUNTIF(X16:ao16,""X"")=18),""Reject"",""Accept"")"
End If
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
I have a report and users will need to key in password while opening. Currently, i am using inputbox and it works exactly like what i expected. However, the only downside is that i cannot mask the password.
I am aware that I have to use userform to do so. How to replace the input box with userform and still deliver the same result.
I know how to create a user from with title, text box, OK and Cancel buttons, and that's it. How to put it in my current code.
Below are the codes that I currently have. There are 4 possible outputs.
[Code].....
Select Case Condition Not Being Met
View 4 Replies View RelatedI don't see what I am doing wrong in this code using "Select Case". When activated and the correct string is entered I should get a msgbox pop up.
View 8 Replies View RelatedI seem to be unable to crack the bug in my macro... I want to define 2 variables before launching the next macro with the defined variables.
When I run this macro - the debugger points all the time to the following line: ...
Is there any difference between these 2 codes:
View 12 Replies View RelatedIf i have a case select say like this
View 4 Replies View RelatedI was wondering if any one can help me with simplifying my Select Case, i have provided 3 examples , 101 , 102 and 103. I will be going all the way from 101 to 199 and I dont want to write every single one. and note that the range values change for each one as well.
View 14 Replies View RelatedI'm creating a small spreadsheet for client data in Excel and I want it formatted a certain way, I did consider data validation but it proved to just be annoying.
I've been working on some VBA code to automatically change whatever text is typed into a cell to the correct case (ucase, lcase or proper) and while I can get it working for a single range of cells getting it to work for more is proving difficult.
If there is a different way, like to select the value in the selected range and cross reference it against a list. i'm not sure... trying to learn and be efficient.
View 3 Replies View RelatedI have a multiple condition and i try using Select case rather than If else. However i try to combine Select case with Like operator but it's not running as it should.
Code:
Sub SetHeader (FuncName as String)
Dim xSheet as Worksheet
Select Case FuncName
Case Is = "_EXCRT"
Set xSheet = Activeworkbooks.Sheets(FuncName)
[Code] .........
This code running good with first case but it will not goto second case even the FuncName string are : "_MB51_00" or "_MB51_01".
Can I do a select case on an array?
Something like?
Code:
Dim Array As Variant
Dim Range as Range
Array = Array(Worksheets("sheet1"), ("sheet2"), ("sheet3"))
Select Case Array
[Code] ........
How do you:
Code:
Select Case x
Case _______ -1 = -1 Then
'code
ElseIf x = 1 Then
'code
End If
While proof-reading my code, I've noticed that these two true select cases ("S" and "W") shown below wouldn't "yield" what I want. I've tried to replace AND (highlighted in red) with "," (comma) but I still get the same result - it still returns a value evaluating either one of two conditions but not BOTH:
Code:
sChar = Split(Waypoint, ",")
For j = LBound(sChar) To UBound(sChar) Step 3
Lat = sChar(j)
Lon = sChar(j + 1)
Elev = Val(sChar(j + 2))
Next j
[code].....
I am having issues with a Select Case failing at the end. Here is the code:
Code:
Public jan As Double
Public feb As Double
Public mar As Double
Public apr As Double
Public may As Double
Public jun As Double
[Code] ........
I have bolded the font on where it fails. If I delete the bolded lines the code runs perfect.
I have a form with seven check boxes on it. The code that I have been working on is below. Using the select case works exactly as I want it to unless someone checks the combination of boxes that returns a "True" for both "Apples" and "Oranges". If that combination is selected I cannot get the select case to return the correct form. I was trying stay with the select case code but I am not sure that this is the correct approach for what I am trying to accomplish.
Private Sub CommandButton1_Click()
If Form1.CheckBox1.Value = True Then X = "Apple"
If Form1.CheckBox2.Value = True Then X = "Apple"
If Form1.CheckBox3.Value = True Then X = "Apple"
If Form1.CheckBox4.Value = True Then X = "Orange"
If Form1.CheckBox5.Value Then X = "Orange"
If Form1.CheckBox6.Value = True Then X = "Orange"
If Form1.CheckBox7.Value = True Then X = "Orange"
Select Case X..........
I'm trying to put the following into a workable VB code. I don't know whether it is best to use Select Case or If Then statements or whether either can perform the tasks.
Case 1 - Range(“N1”).Value = “KG” Then Range(“M1”).Value = Range(“V1”).Value
Case 2 - Range(“N1”).Value = “M2” Then Range(“M1”).Value = Range(“V1”).Value
Case 3 - Range(“N1”).Value = “NO” Then Range(“M1”).Value = Range(“U1”).Value
i hv a excel file which have 200k row. recently i learn from this forum using VBA (excel macro code) for select some data for analysis. it take very long. any suggestion will be apprecaited.
i already increase my note book ram to 2GB. it still slow.
I have below codes:
Private Sub Worksheet_Calculate()
For Each rCell In Range("D2:CU5")
Select Case rCell.Value
Case 1, 0.000000001 To 89.499999999
rCell.Interior.ColorIndex = 3
Case 2, 89.5 To 99.499999999
rCell.Interior.ColorIndex = 6
Case 3, 99.5 To 109.499999999
rCell.Interior.ColorIndex = 4
Case 4, 109.5 To 999
rCell.Interior.ColorIndex = 8
Case Else
rCell.Interior.ColorIndex = 15
End Select
Next rCell
End Sub
However if a value within the range "D2:CU5" happens to be #Div/0! (or any error value for that matter) I get a debug error message. Then the CASE ELSE formatting doesn't apply. I expect that everything else should fall under CASE ELSE. Is there a way to handle this i.e. the formatting under CASE ELSE applies?
Is there a way to count if there are 5 or more in a range without
using 'select case'
or not using the 'intcounter' bit bit of code?
Set Startcell = Sheets("meetingstodate").Cells(xlrow, 2)
Set Endcell = Sheets("meetingstodate").Cells(xlrow, 7)
Set rng = Range(Startcell, Endcell)
lastrow = Sheets("meetingstodate").Cells(xlrow, 2).End(xlDown).Row
For xlrow = 2 To lastrow
arr = Range(Startcell, Endcell).Value
For j = 1 To UBound(arr)
For k = 1 To UBound(arr, 2)
Select Case arr(j, k)
Case A
intcounter1 = 1
Case B .....................
