VB Macro To Run Multiple Macro In Time Interval
Jun 26, 2014
I have to run quite a few excel VB macro every morning one after the other.
I have to manually go thru each of them.
I need to create 1 VB macro which will run all macro after 1 min of interval in between.
Example:
Macro to run Sub Store1
Wait 1 min and then run Macro for Store2.
Macro to run Sub Store2
Wait 1 min and then run Macro for Store3.
Macro to run Sub Store3 and so on.
Below is the code I started with but not successful.
[Code] .....
View 2 Replies
ADVERTISEMENT
Apr 28, 2014
I have a column of "timestamp" data (in mins) which i want to filter by a given time interval, say 10 mins. Then i want to count the number of records for each time interval and output the data to a sheet. how can i achieve this? through vba?
I attached a pic illustrating what i want to accomplish.
QQ截图20140429104406.png
View 1 Replies
View Related
Jun 8, 2013
I have a worksheet with 35,136 rows of data. I want to calculate the average of every 4th cell in the same column. Is there a way to create a macro to select every 4th cell in the average formula? If so, can I then substitute min and max for average?
View 1 Replies
View Related
Jun 13, 2007
I have to run the macro in over 75 sheets every month and they are divided in few workbooks. The workbooks have 2 summary sheets and then the sheets I need to run the macro. Can you help me to run the macro in all of these workbooks running it just once?
Sub TelcoTicketsCleaning()
'
' TelcoTicketsCleaning Macro
' Macro recorded 6/13/2007 by EQUANT
'
Dim lastrow As Long
lastrow = Cells.Find(What:="*", After:=[A1], SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
For r = lastrow To 46 Step -1 'Remove rows with DSL, ISDN and PSTN services..................
View 9 Replies
View Related
Sep 5, 2008
I have a list of times, and I need to work out a way to establish what time interval it applies to, using a function. In production, this will be used over hundreds of entries at a time, but for the sake of example I'll cut it down to 15 times:
17:28:35
16:11:14
17:08:20
19:21:51
15:29:01
15:31:45
14:32:24
13:39:51
15:44:41
16:52:38
20:17:37
13:26:05
15:45:01
20:12:24
12:53:26
Now, there are 27 different time intervals there times can fall into:
1: 6:00 - 6:30
2: 6:30 - 7:00
3: 7:00 - 7:30
4: 7:30 - 8:00
5: 8:00 - 8:30
6: 8:30 - 9:00
7: 9:00 - 9:30
8: 9:30 - 10:00
9: 10:00 - 10:30..............
So, what I'm looking for is a formula that will match up the time to the interval. For example, it would look at 16:52:38 and output that it falls within interval 20.
View 5 Replies
View Related
Oct 11, 2013
I have a file that sits open all the time, and performs some refresh functions every thirty minutes. I need the file to save a copy of the tab as a CSV file at a given time interval. The code below is almost there, just need to work with the time interval part. The way it should work is to open the csv, copy / paste the active sheet; then close the csv; leaving the original excel file open. I can run it, and it works, but the time interval is not triggering.
I can get the time interval to work by itself, and the save csv part to work by itself also; I need them to work together.
VB:
Sub test()
Application.OnTime Now + TimeSerial(0, 1, 0), "test"
Dim OutputFile As Workbook, InputFile As Workbook
Dim sDD As Worksheet
[Code].....
View 2 Replies
View Related
Mar 14, 2014
I need to get the total values within a criteria. Please see attached sample file.
View 5 Replies
View Related
Apr 18, 2009
I have 2 columns of data (value and time):
for example:
15 4/2/08 13:00
4 4/2/08 19:00
7 4/5/08 12:00
13 4/9/08 3:00
They are continuous data. so I want to divid the value into hourly data as follows.
15 4/2/08 13:00
? 4/2/08 14:00
? 4/2/08 15:00
. .
. .
? 4/9/08 2:00
13 4/9/09 3:00
View 9 Replies
View Related
Nov 2, 2013
Im trying to create a spreadshet to determin hrs per time interval
i.e
06:00 - 14:00
14:00 - 22:00
22:00 - 06:00
so a start time of 06:00 and finish time of 14:00 would show 8hrs in first interval and 0 in the other 2
and a start time of 10:00 and a finish time of 18:00 would show 4hrs in first interval and 6 in second and 0 in last
ive currently got start time in A1 , finish time in B1 and want hours for interval 1 in D1 , interval 2 in E1 and interval 3 in F1
View 2 Replies
View Related
Aug 29, 2008
I have a column that shows the date and time and it looks like this:
8/1/2008 6:36 AM
8/1/2008 11:15 PM
8/1/2008 8:01 PM
8/1/2008 3:12 AM
I want to convert it to show just the time but I want it to be in 30 minute increaments. So in the example above, I'd want to see this:
06:30
23:00
20:00
03:00
View 9 Replies
View Related
Jun 23, 2013
I have obtained a piece of code from online that runs a macro on multiple files in a single given a single folder. when i implement it though it throws a run time error 424 "object required' and point to 'Documents.Open FileName:=path & file' line of code. Is this because Dim file type is not declared?how do i fix this problem. also, im using excel 2010.A
VB:
Sub Mac()
Dim file
Dim path As String
[Code]....
View 4 Replies
View Related
Jun 23, 2006
Is it possible to 'round' a time to the next nearest 15min interval?
As an example in cell A1 I have a value that returns 2:07 PM (its formated
as h:mm AM/PM), but in B1 I wish to translate this to the nearest 15min
interval in an hour which is 2:15 PM, if the value in A1 was 5:39 PM I would
want to show 5:45 PM in B1 etc etc
View 13 Replies
View Related
Jul 20, 2012
I am having trouble getting a VBA code to do the following:
2012/05/01 00:00:00
2012/05/01 00:03:00
2012/05/01 00:06:00
2012/05/01 00:15:00
2012/05/01 00:18:00
From this above to this below
2012/05/01 00:00:00
2012/05/01 00:03:00
2012/05/01 00:06:00
2012/05/01 00:09:00
2012/05/01 00:12:00
2012/05/01 00:15:00
2012/05/01 00:18:00
There are data entries next to these time stamps. I am able to create just the time stamps starting at the beginning and ending at the end of the month but I need it to fill in missing entries in a data set. The code below works but only some of the time. I have tried a few different things but nothing works.
Code:
Sub Insert_missing_3min()
'Inserts a row with the date and time where the missing date and time stamp is and a zero next to the date added.
Dim min3 As Date
Dim CurTime As Date
Dim CurCell As Date
Dim NextCell As Date
min3 = 3 / 24 / 60
[Code] ........
View 1 Replies
View Related
Jan 24, 2008
I have two sets of data, one is recorded every 5 minutes and the other is every 15 minutes. I am trying to add every 3 cells in the 5 minute column so I can compare it side by side with the 15 minute column. I have tried one of the responses in this forum with placing 0s in 2 cells and then the formula in the third however this does not allow me to compare the 2 sets side by side.
View 4 Replies
View Related
May 28, 2012
I'm trying to rearrange vertically aligned data so that they are horizontal. But at the same time, I need this macro at an interval.
To give you an example,
Mr. Yang Xin 221-421-5123 Male College Grad
Ms. Taylor Cindy 534-123-5512 Female Uni Grad
In this case, we need the data to be arranged this way.
Mr. Yang Xin 221-421-5123 Male College Grad Ms. Taylor Cindy 534-123-5512 Female Uni Grad
Could you write me a macro?
View 5 Replies
View Related
Jan 23, 2014
I have been trying to work out a formula for capturing the number of patients in the hospital at half hour time intervals. There are a lot of formulas for capturing this information within a 24 hour period however not a lot of information when the Length of Stay or episode time is +24 hours.
As you can see in my example spreadsheet below, some of the patients stay for 244 hours (row 9).
The outcome that I am looking for is that a 1 is placed in all of the time slots when the patient is there. For example if they arrive on Jan 1st at 2.15 and leave on Jan 3rd at 10.30 all of the time slots in between would have a 1 placed in them.
I have been playing around a lot and think it is probably only possible if you set it up as I have in the example i.e. by having the date running down and the time running across.
How this could work? I have tried SUMIFs and SUMPRODUCT formulas which generally work for Jan 1st but then go wrong for any date after that.
View 4 Replies
View Related
May 8, 2013
I have a large data set which contains four coloumns: Supplier, Supplier number, order number, and date/time of delivery. The date/time coloumn is formatted as YYYY-MM-DD HH:MM with a 24h time notation. What i want to do is to find deliveries that occurs within 1 hour and that are from the same supplier. So i basically want to group (?) the data with regards to the suppliers and then, within these subsets, check for date/time entries that occurs within 1 hour from each others by "reading" each date entry and compare it to the following one(s) (and maybe stop comparing when the 1 hour interval is passed)?
Furthermore, even if this one might be very hard, it would be good if i could make sure that the entries that are "tagged" as within a 1 hour interval, wont be used as basis for a new interval or be included in other intervals.
The result i am after would be number of 1 hour intervals for each supplier and the number of entries in each interval.
Below is an example from the date/time coloumn:
12-03-08 15:32
12-03-08 15:33 ... Interval with 2 entries
12-03-12 14:54
12-03-28 11:57
12-04-16 09:10
12-05-07 13:41
12-05-07 13:46 ... Interval with 2 entries
12-05-28 11:55
12-05-28 12:00
12-06-04 12:01 ... Interval with 2 entries
12-06-04 12:09
12-06-11 08:30
12-06-11 08:31
12-06-11 08:59 ... Interval with 3 entries
12-07-02 11:10
View 8 Replies
View Related
Feb 1, 2009
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
View 5 Replies
View Related
Dec 2, 2008
I have a macro that is taking a long time, so long that I think something is wrong but I dont really have a great way to check. I want to put up a little window showing the progress either by saying "i'm on row XX" or having a progress bar.
Looks like msgbox requires action before the code continues so it is not a good thing to use if you want to get progress. My formula looks for bad values in a data file and fixed them. It takes forever. I would like to have a box there that simply tells me what row it is working on.
Clearly I dont want to hit the OK button for it to continue processing. I want it to update the message box on its own and then take away the message box when it is finished processing.
View 8 Replies
View Related
Jul 16, 2007
I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???
View 2 Replies
View Related
Mar 28, 2014
I am looking for a function to convert time given by my computer (Local time) in EST (Eastern Standard Time). We are several users of a same file (with timestamp macros) and all time need to be aligned to one time zone (EST), even if all users are working in different time zone (EST, CST and IST).
View 1 Replies
View Related
May 22, 2009
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies
View Related
Mar 7, 2014
I have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?
what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.
View 9 Replies
View Related
May 23, 2007
how to include a line of code, to start a sub running at a selected time? Given that the workbook is already opened before that time?
View 6 Replies
View Related
Dec 25, 2007
Can I adapt this code so that users receive the alert if they try and go to the next field without filling in the required ones, or - better - to combine it with a code that does not run a macro, but instead gives the alert, if the required fields have been missed. (I don't require anything to do with printing, this was the closest code I could find)
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If Sheet1. Range("A1").Value = "" Then
MsgBox "Cannot print until required cells have been completed!"
Cancel = True
End If
End Sub
View 4 Replies
View Related
Oct 10, 2006
I'm not sure why this is happening, but every other time I run this one specific macro, I get a "Run-time error '1004': Paste method of Worksheet class failed". I even tried running this macro, then running a different one, then running this again, but I still got the error every other time.
Every time I get the error, it highlights this line of
Sheets("Regenerate Request").Paste
This is all of the code up to where I get the error:
Sub YesRegen()
' after user has hit Yes on the RegenerateRequest macro, this posts the new request to
' the log, generates the new file and attaches it to an email
Application.Run "LogUnprotect"
Range(Range("A" & ActiveCell.Row), Range("K" & ActiveCell.Row)).Copy
'Selection.Copy
Sheets("Regenerate Request").Activate
Application.Run "RegenFormUnprotect"
Range("A40:K40").Select
Range("A40").Activate
Sheets("Regenerate Request").Paste
View 10 Replies
View Related
Mar 7, 2014
How to avoid the macro runs with infinite loops??
I am writing a macro in the worksheet and would like to let it run ONE TIME ONLY. Is there any coding i can add to make it runs only one time?
View 6 Replies
View Related
Nov 19, 2008
I have a macro that clears a cell if the value of a cell matches a certain variable:
Sub ClearCell()
With Worksheets("Sheet1")
If .Range("C20").Value = "10" Then .Range("C22").ClearContents
End With
End Sub
View 2 Replies
View Related
Nov 19, 2006
2 worksheets.
Sheet 1 has a list of events and their "event start times" in Easter Standard Time. The is the actual data Imported.
So,
15:00:00 in Sydney NSW would be 14:30 West of Sydney, SA,NT ect.
Sheet 2's reference formula to Sheet1's Event Start times is:
'Sheet2 A1
=INDIRECT("Sheet1!A1") ' will show the event start time from Sheet1 A1
'Sheet2 A2
=INDIRECT("Sheet1!A2") '
'Sheet2 A3
=INDIRECT("Sheet1!A3") '
'Sheet2 A4
=INDIRECT("Sheet1!A4") '..............
View 9 Replies
View Related
Aug 23, 2007
I've got an auto close macro that closes after 8 minutes, however if the user is half way through another macro the application will not close, such as a message box/input box is open. Is there any way to stop all macros running before running the auto close macro to force close.
View 3 Replies
View Related
