I have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?
what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.
I have created a button name "Add Power Source" on excel sheet that adds a table and a button(named "Add Row") to the sheet.Whenever the user clicks the "add power source" button a table and a "Add new row " button is created .This "Add new row" button is used to add rows to the table.
Now suppose the user has pressed the "add power source" button 5 times,so that there will be five table on sheet and each having a "add new row " button associated with it.When the user wants to add a new row to the table 2 say .How will I come to know in which table the rows are to be added using VBA.
In my job, my team have to take phone-calls from stores asking various questions. In order to combat this, I have set up a call tracker to see where the calls are coming from (so we can beat them with a stick). I have asked my colleagues to record the date and time of the calls.
I need a big button at the top of the page that says 'New Call'. Then, when this button is pressed, the time and date stamp will automatically be put into cell A3, then when pressed again a4, and again a5... and so on.
I am struggling with the following:
-Using CTRL + Shift + : to input the date/time on a macro inputs the date I made the macro, not the date/time the button is pressed!
-I can only get the date to go in cell A2 - If I press it again, nothing happens. how to do this, or just do it for me
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies View RelatedI am trying to get the start date and end date by command button but want this date and time to be given in particular column only not in active cell and this need to be continued in next rows by clicking command button.
View 10 Replies View RelatedI need is to be able to have a button show up on an Excel spreadsheet that you push to update the DAY and TIME to today. But, I need it to stay in a protected field so that it doesn't accidentally get changed by other users who open it up. And we save these for retention purposes, so if I open it a couple days later, I need the date to stay as the date I edited it on.
View 4 Replies View RelatedI am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I'm trying to assign a shortcut to a macro I wrote in VB. However, when I go to Tools->Macros->Macros, none of my macros (whether coded in VB or recorded) have the "Options..." button enabled, so I can't assign the macro. This happens whether I use Excel 2003 or Excel 2007. The file is not readonly and I have tried the various levels of macro security. I have VBA installed.
View 5 Replies View RelatedI want to assign a macro of start time and end time on one button. I tried but its not working..
View 2 Replies View RelatedI have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedIf i want to make a macro button to run for a certain no. of time pressed, like for 100 times, then the button is disabled, how can this be done?
View 9 Replies View RelatedConsider this code:
'light eligibility
Dim facb As String
Dim sunset As Variant
[color=green]' check if facility has lights[color]
facb = WorksheetFunction.VLookup(RID, ds, 10, False) 'find facility code
If WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Then 'facility has lights
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False) 'lookup the sunset time based on the record's date
[Code] ......
This code checks the need for lights at a facility.
It first checks to see if the facility even has lights by cross-referencing a value in the record with a facilities database.
If it has lights, it then checks to see if they are needed. If the rental goes past the sunset time, then it needs lights. Sunset is determined by cross-referencing the date value in sheet1! A9, with the sunset database.
If it needs lights, variable lghtson is calculated equal to "sunset"-30 minutes.
As I step through this code:
WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Facility has lights.
Check to see if lights are needed.
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False)
sunset=0.879166666666667 which is 9:06PM. This is a proper value from the lookup.
If rental_end.value > sunset Then
rental_end (value from textbox) = "9:30 pm" , sunset=0.879166666666667. This is true, and Excel accepts it as true ...
lghtson = sunset - 0.5
0.379166666666667 = 0.879166666666667 - 0.5 (9:06 AM)
This is not the value I was looking for. I was looking for 8:34PM (0.856944444444444)
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
I have a column of values resulting from subtracting a static date and time from the current date and time.
This means it is constantly updating, which makes it impossible to sort.
All my work depends on sorting those values, though.
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 Replies View RelatedI have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
I found a useful thread Creating UserForm Controls via Code. how to create dynamically scalable UserForms at run time. I'm now stuck on the obvious Part 2 that isn't included...How does one capture the values in the text fields without knowing the names of those fields. My initial thought is to use a For loop to read the values into an array, like so...
Dim ReadArray (TextFieldCount)
For k = 1 To TextFieldCount
ReadArray(k) = ?????????
Next k
If it were a simple read from a text field I'd use something like:
Set ReadField = TextBox1.Value
I'm trying to look up information in "pi" by entering a time that you want to look up say 1800 or 935 and have a cell that would enter it as todays date with that time so I can use it as a timestamp in "pi"
View 1 Replies View RelatedI have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
Is there a way to automate the date and time in one cell upon saving? I have seen some posts elsewhere upon this subject, but here is the twist:
this is a shared workbook with each tab allocated for a different person. Each person needs to update their worksheet and have the date and time update upon saving. The date and time would appear in the same cell for each sheet. I am fairly certain that this cannot be done with an Excel formula, so I would appreciate if anybody had any VBA suggestions. (I am just starting to learn VBA
I'm trying to save a file with current date and time...I used the code from the following thread:
Save File Name With Date/time Stamp
ActiveWorkbook.SaveAs Filename:="C:FinalOutput.xls " & _
format(Now(), "mm_dd_yyyy hh mm AMPM"), FileFormat:=xlNormal, Password:="", _
WriteResPassword:="", ReadOnlyRecommended:=False, CreateBackup:=False
Now when I try to run the macro, it gives me an error saying: Compile Error, Wrong number of arguments or invalid property assignment. And it highlights "format" in yellow.
I am creating an invoice form in Excel 2003. I like to know if it is possible to increase the value of cel A1 by one everytime a new sheet is created.
For example i created my first worksheet and gave an invoice number 001. Now I create a new worksheet by right clicking on the tab and choose copy/move. I like the second work sheet change the invoice number to 002.
I would like to merge a colum with a date and a column with a time into one to show DD/MM/YYYY HH:MM
I have tried merge cells and it takes out the time and leaves the date only.
I have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
View 5 Replies View RelatedI want to add hours to a date-time cell to get result in date-time.
Format of cell A1 is d/m/yy h:mm AM/PM
Format of cell A2 is General
Format of cell A3 is d/m/yy h:mm AM/PM
I want to add A2 (number of hours) to A1 to give A3.
The formula I used is A3=A1+Time(A2,0,0)
The formula works perfectly fine when A2 is less than 24, but when A2 is more than 24, the date doesn't get changed.
I have a file that has the Date and Time combined into one cell. I want to separate the two, and cannot find anywhere on the net to do so!
This is the cells format:
d/mm/yyyy h:mm
Cells look like this:
28/05/2008 12:30
What I am looking to do is find the time it has taking to complete a task - So the work sheet has four cells (See below) and return the total time with cell E
Cell A Cell B Cell C Cell D Cell E
June 5 10:00 AM June 6 12:30PM ????
I have a large dataset where the first column is date and time i.e. "20/01/2005 03:41:06" and I want to delete certain rows based on the times. I have already tried playing about with macro's but failed fairly spectacularly so far. I have code from someone else to delete cells if the value equals a certain time but this doesn't work as the cell contains the date too.
I have already recorded one macro to reformat the data to as the software return 10 timestamped samples per hour and I want 8 i.e. every three hours so there is constant separation for statistical purposes. Both the macros are shown below so you can see what I have.
Ideally I would like to replace the line - If (r.Cells(n, 1) = TimeValue("22:41:06")) ............ - with one that reads - If (r.Cells(n, 1) CONTAINS TimeValue........ - but I don't know if that is possible? If not is there a way to separate the time from the date into 2 columns and then I can delete rows based on the time column using the code below? .......
I have a Excel Dates & Times column where the time is not always used. In these cases the time is 12:00AM. Is there a way to Custom Formats the cell so that the time is only visible if it is not 12:00AM?
View 6 Replies View Related
