VBA Conditional Formatting To Highlight Certain Conditions
Oct 2, 2009
I have a spreadrsheet (sample attached) which populates a calender due to columns on seperate sheets being filled with text and corresponding dates. I started using conditional formatting to highlight certain conditions but soon realised I need more than 3 so I tried looking into VBA - and failed.
All the cells in the calender have the 3 usual conditions associated to them but in addition I need to be able to colour individual cells if they contain certain phrases or parts of phrases like "BP" or "Current"
View 3 Replies
ADVERTISEMENT
Oct 17, 2007
I would like to highlight cells is two conditions are met:Cell = 0Offset(0,-1)>0I tried the conditional format wizard and entered a formula: =IF(AND($J2=0,$I2>0)) But I keep receiving formual errors, which I understand, because it appears to be incomplete formula. But I am not sure what else I need to add to the formula in the conditional format wizard
View 2 Replies
View Related
Jun 9, 2014
In the attached spreadsheet, the numbers in col A derived from another spreadsheet. The table D1:L21 is precaculated based on projection. I need 2 cells highlighted when they capture the number from the same row (col A). In another word, whenever the number from col A fall in between the 2 cells in the same row, they will be highlighted. Another condition is when it is smaller then 10 reps, the corresding cell in col D will be highlighted, as demonstrated in the attached table. I tried AND(E2<A2, F2>A2) but it didn't work. I also tried LARGE((E2:L2<A2)*(E2:L2),1) and similar SMALL function. They work as an array in normal excel, but not in the conditional formatting.
View 5 Replies
View Related
Jun 27, 2013
I am trying to fill a cell green if the current value > avg value and in red if < than avg value. I have tried to use conditional formatting but I cannot see where i can add additional rules. In any case here is what I am trying to do:
Daily Avg. Units:42
Avg Bgt. Units:7
The cell containing the number 42 is filled in green. If the figure was less than 7 it would have been red.
View 11 Replies
View Related
Mar 6, 2008
Why is there a hard limitation like this? Is there a way to go around it? By having a different format for the cells outside the 3 conditions I can get 4 different formats altogether, but that's not really that much.
View 14 Replies
View Related
Jan 23, 2010
I'm using Excel 2000 which has a limit of three conditions, I have 6. If you could just get me started, I still don't understand VBA enough to do this.
In cell A1, the color is set to red. I want A1 to turn green when all 6 conditions are met:
1. Cell B1 has a valid value from its pull down list, no other value, and not empty.
2. Cell B2 has an integer, no decimal places allowed, and not empty.
3. Cell B3 has a valid value from its pull down list, no other value, and not empty
4. Cell B4 is not empty.
5. Cell B5 has a three decimal place number greater than zero.
6. Cell B6 has a single letter from A-Z only.
View 9 Replies
View Related
Jan 26, 2007
I have tried it, and it isn't changing the cells when I test the macro. I'm obviously doing something wrong, but can't figure out what....
View 9 Replies
View Related
Oct 17, 2008
I am using a drop down list in excel and want to conditional format the cells based on what is selected from the list. I can't use conditional formatting as I have more than 3 items in the list.
I am guessing VBA can help but am a complete novice so could use some handholding on what to do.
Idea is that if someone select "Good" from dropdown, cell becomes green, "Stable" is amber and so on.
View 9 Replies
View Related
Jul 10, 2009
Is it possible to apply confitional formatting on 6 conditions ...
View 9 Replies
View Related
Jan 8, 2010
I want to use conditional formatting for RAG reporting. I had done this by having Cell is R then the format would be RED, Cell is A, then yellow, etc...
However I would like to have a blank cell or N/a no format the cell at all-currently this is making the cells green.
Do I need to use Formula instead? and tips on how this could be written would be great as well.
View 9 Replies
View Related
Oct 31, 2006
I am trying to colour cells depending on the text in the cell. The text includes letters and symbols (e.g. A+ or C). The problem is I have five different conditions and Excel will only let me set up three.
The conditions I require are:
Text: A+ or A Colour: Pink
Text: A- or B+ Colour: Light Orange
Text: B or B- Colour: Sea Green
Text: C+ or C Colour: Lavender
Text: C- or D Colour: Brown
View 5 Replies
View Related
Jan 26, 2007
Need to figure out a code for Conditional formatting to work for 4 cases. I dropped programming 5 yrs ago...have forgotten mostly everything but I know this can be done. What I need:
Range = entire sheet
Upon entering a date(X) anywhere in the row the date is calculated from today's date(Y) and if the date entered is -infinity to 30 then the entire row turns red. 31 to 60 days orange, 61 to 90 days yellow, 91 to 120 days green, 120+ nothing.
Basically Y-X.
Case <30 red row
Case 31-60 orange row
Case 61-90 Yellow row
Case 91-120 Green Row
121+ nothing.
View 2 Replies
View Related
Apr 2, 2007
I'm trying to add conditional formatting to a column of data but there are more than 3 conditions. Is there a way of increasing the number of conditions you are able to set using the conditional formatting wizard or, if not, is there a way of applying conditional formatting using VBA ?
View 3 Replies
View Related
Aug 10, 2007
I am running Excel 2003 and when I open the file, I get the error: Invalid procedure call or library. When I check the references, it has
Microsoft Excel 11.0 object library
Microsoft Office 11.0 object library
and I manually added
Microsoft Outlook 11.0 object library
Not only do I get the same error, but when I try to save, it just gives me the totally unhelpful error message: File not saved
View 8 Replies
View Related
Jun 2, 2014
Please refer to the attached data sheet. I need the D27 to be formatted so that it shows a value only if the value in D8 exceeds the value in D7..
View 5 Replies
View Related
Dec 25, 2009
I have a list of percent item. I want to use conditional formatting to highlight items greater than 50%. I do as following:
- Hightlight items, C2:C5, then choose Format ->Conditional Formatting
- I choose Formula is, and the format in the condition box is =">50%"
- Finally, I choose Format to choose the color.
I think I do the right steps but Excel doesn't show anything.
View 4 Replies
View Related
Nov 6, 2008
I am trying to use conditional formatting for a cell; It is a cell using Validation; you can choose "Yes" or "No" from a list If the value is "Yes" the cell should be green, regardless of everything else But if the value is "No" it should turn red, but only if a choice in another cell is equal to "X". Otherwise it should be left without special formatting.
View 2 Replies
View Related
Oct 11, 2013
I am trying to do some conditional formatting to highlight rows based on several conditions, I don't know if this is possible, but these are the criteria:
AAPL
tt
10/1/2013 11:14:15
GOOG
ll
10/1/2013 11:14:20
[code].....
I want to highlight a row if:
- the difference in time value is < 20 seconds
- the first symbol column is the same
- at least one, but not all of the rows meeting the above criteria contains a value in the second column from a given list (in this example, say tt is on this list)
So if done properly the logic would highlight the first and third rows, but would highlight none if none of the values in column two match my list.
I think the test criteria would go something like this, however I know that there are problems with my row references.
=and(abs($C2-$C3:$C65536)<0.0003,$A2=$A3,match($A2,Sheet1!A:A,0)>0)
View 2 Replies
View Related
Jun 10, 2009
I have a spreadsheet that contains a great deal of information, though most if it contains dates. There are some colums that contain the word "NEED" if i don't yet have the date to put in there, and the cell is yellow. What i want to do is set up conditional formatting to change the cell to pink if:
A)the cell contains the "Need"
and
B)The date in the corresponding row from column C is more than 15 days old.
View 14 Replies
View Related
Apr 24, 2002
Can I have more than 3 conditions for the conditional formatting function?
View 9 Replies
View Related
Nov 14, 2006
I have a cell that I want changed to green (red 133 Green 180 Blue 0) if a line is considered active. As conditional formatting only allows 3 arguments, I need to perhaps code it?
Along the columns are cells that can change a row to active or inactive.
Here are my arguments.
If B5>1 .. row = active
If B5>1 & G5>1 .. row = inactive
If B5>1 & G5>1 & H5>1 .. row = active
If at any time L5>1 & M5="" .. row = inactive .. OR
If at any time Q5>1 & R5="" .. row = inactive .. BUT
If at any time L5>1 & M5>1 .. or .. Q5>1 & R5>1 .. row = active
then ..
If H5>1, M5>1, R5>1, T5>1 & AH5="", AJ5="", AL5="" .. row = active
so If at any time AH5>1 .. or .. AJ5>1 .. or .. AL5>1 .. row = inactive
View 6 Replies
View Related
Nov 3, 2008
In a range, say A1:D5, I need to format cells as follows:
1) If cell contains only "H" or "HV": highlight red
2) If cell contains only a number: highlight blue
3) If cell contains a number with the letter "F" ("1 F" or "5.5 F"): highlight pink
View 2 Replies
View Related
Feb 22, 2010
I am working on a spreadsheet in Excel 2007 and i am trying to use a formula in the conditional formatting that will highlight a cell if the date is prior to today's date and the next column over is no. the formula i am using right now is =IF(F2>TODAY(),IF(G2="NO",TRUE,)). the problem i am having is that it is highlighting all cells that have a date and the next column over is no.
i can't figure out how to get it to do an if this, then that function correctly. one other thing that could potentially be causing my problem is that the cells.
I am trying to have highlight are calculated themselves based on a formula. see the attached spreadsheet for information.
View 4 Replies
View Related
Apr 5, 2013
conditional highlighting.PNG
Is there a way I can have excel automatically highlight all cells within A1:A3, B1:B3, C1:C3 if and only if they are greater than the percentage in E5? If so how would I go about doing this?
View 4 Replies
View Related
May 16, 2008
I need to hightlight from A1:A18
In the above cells I have values from 1 to 4
So I need to fill the cell with 4 different colours.
If cell equals 1 = Green
If cell equals 2 = Yellow
If cell equals 3 = Red
If cell equals 4 = Blue
What I do is highlight cell from A1:A18, clik on 'Format', 'Conditional Formatting', I've tried using 'Cells Value is' and 'Formula is'.
View 12 Replies
View Related
Oct 4, 2008
I have a worksheet that has times based on 7 minute intervals. If I post 10:37 AM in cell b5 then again in cell b6 I would like b6 to highlight.
I'm trying to use countif($b$3:$b$15,b2)>1 to highlight duplicate times in column B. For some reason it will not work for me. Should I use something different?
View 2 Replies
View Related
Dec 9, 2008
i am trying to highlight the cells red in the b column if a3=d3 (if names match) and if b3<e3 (only if name is "a" should e3 be used to compare with b3). hope this makes sense. i've attached a sample worksheet.
i've tried =if(b3<e3, (vlookup(a3,d3:e33,1,false),true)...but does not work correctly. i need the average weight to remain constant according to the name when comparing, but if i drag the formula down to other cells, the average weight does not correspond to the name.
View 3 Replies
View Related
Aug 20, 2009
What i want to do is highlight all row instances where that row column10 has the text "Roller" . All i can see is the forumular =$J1="Roller" ive tryed to select just the single cell J and tryed the whole row and a range. Though i get a error message about =-+ quotation ect.
View 5 Replies
View Related
Jan 25, 2012
I would like to highlight the holidays (for Belgium) through conditional formatting if possible or something else.
Exemple:
If D1 (= an holiday)
than highlight in grey D1:D34
How to proceed?
View 9 Replies
View Related
May 30, 2014
how can I set up conditional formatting to highlight the smallest value, by row?
View 2 Replies
View Related
