Conditional Formatting - With Two Conditions Within One Formula
Nov 6, 2008
I am trying to use conditional formatting for a cell; It is a cell using Validation; you can choose "Yes" or "No" from a list If the value is "Yes" the cell should be green, regardless of everything else But if the value is "No" it should turn red, but only if a choice in another cell is equal to "X". Otherwise it should be left without special formatting.
I would like to highlight cells is two conditions are met:Cell = 0Offset(0,-1)>0I tried the conditional format wizard and entered a formula: =IF(AND($J2=0,$I2>0)) But I keep receiving formual errors, which I understand, because it appears to be incomplete formula. But I am not sure what else I need to add to the formula in the conditional format wizard
In the attached spreadsheet, the numbers in col A derived from another spreadsheet. The table D1:L21 is precaculated based on projection. I need 2 cells highlighted when they capture the number from the same row (col A). In another word, whenever the number from col A fall in between the 2 cells in the same row, they will be highlighted. Another condition is when it is smaller then 10 reps, the corresding cell in col D will be highlighted, as demonstrated in the attached table. I tried AND(E2<A2, F2>A2) but it didn't work. I also tried LARGE((E2:L2<A2)*(E2:L2),1) and similar SMALL function. They work as an array in normal excel, but not in the conditional formatting.
I am trying to fill a cell green if the current value > avg value and in red if < than avg value. I have tried to use conditional formatting but I cannot see where i can add additional rules. In any case here is what I am trying to do:
Daily Avg. Units:42 Avg Bgt. Units:7
The cell containing the number 42 is filled in green. If the figure was less than 7 it would have been red.
Why is there a hard limitation like this? Is there a way to go around it? By having a different format for the cells outside the 3 conditions I can get 4 different formats altogether, but that's not really that much.
I'm using Excel 2000 which has a limit of three conditions, I have 6. If you could just get me started, I still don't understand VBA enough to do this.
In cell A1, the color is set to red. I want A1 to turn green when all 6 conditions are met:
1. Cell B1 has a valid value from its pull down list, no other value, and not empty. 2. Cell B2 has an integer, no decimal places allowed, and not empty. 3. Cell B3 has a valid value from its pull down list, no other value, and not empty 4. Cell B4 is not empty. 5. Cell B5 has a three decimal place number greater than zero. 6. Cell B6 has a single letter from A-Z only.
I am trying to colour cells depending on the text in the cell. The text includes letters and symbols (e.g. A+ or C). The problem is I have five different conditions and Excel will only let me set up three.
The conditions I require are: Text: A+ or A Colour: Pink Text: A- or B+ Colour: Light Orange Text: B or B- Colour: Sea Green Text: C+ or C Colour: Lavender Text: C- or D Colour: Brown
Need to figure out a code for Conditional formatting to work for 4 cases. I dropped programming 5 yrs ago...have forgotten mostly everything but I know this can be done. What I need:
Range = entire sheet Upon entering a date(X) anywhere in the row the date is calculated from today's date(Y) and if the date entered is -infinity to 30 then the entire row turns red. 31 to 60 days orange, 61 to 90 days yellow, 91 to 120 days green, 120+ nothing.
Basically Y-X. Case <30 red row Case 31-60 orange row Case 61-90 Yellow row Case 91-120 Green Row 121+ nothing.
I'm trying to add conditional formatting to a column of data but there are more than 3 conditions. Is there a way of increasing the number of conditions you are able to set using the conditional formatting wizard or, if not, is there a way of applying conditional formatting using VBA ?
I have a spreadsheet that contains a great deal of information, though most if it contains dates. There are some colums that contain the word "NEED" if i don't yet have the date to put in there, and the cell is yellow. What i want to do is set up conditional formatting to change the cell to pink if:
A)the cell contains the "Need"
B)The date in the corresponding row from column C is more than 15 days old.
I have a spreadrsheet (sample attached) which populates a calender due to columns on seperate sheets being filled with text and corresponding dates. I started using conditional formatting to highlight certain conditions but soon realised I need more than 3 so I tried looking into VBA - and failed.
All the cells in the calender have the 3 usual conditions associated to them but in addition I need to be able to colour individual cells if they contain certain phrases or parts of phrases like "BP" or "Current"
I have a lot of data (regarding graffiti) in a table and all my formulas work well. But, because I sometimes make an error in two columns of data I sometimes get results that do not balance. I want to put in a conditional format (?Is there a better way?) that will highlight the error as I enter the data. Can you help please?
Using Excel 2003 (sp3) and no add ons. There are lots of identical rows, 5:400, making up a table. I will use row 10 as an example.
In column M there is a formula which may or may not give a visible result. (It's a measure of the number of days taken to clean the graffiti and will only hold a result if the job has been finished.) The result for "M10" will be a number between 0 and 5 90% of the time, but may creep up to 30. It may also leave the cell looking blank although the formula itself is still lurking out of sight.
A matching row of cells, O10:T10, have no formulas in them. I must manually enter a "w" or an "a" into ONE of these columns, depending on the graffiti location (Worthing or Adur) and property ownership (Columns for residential, commercial, council etc.)
So now the errors I need to flag up as I enter data are to ensure that M and O:T balance. There should always be a result in M if there is an entry somewhere in O:T and if there is an entry in M there must be an entry somewhere in O:T.
Sometimes I mistakenly put an entry in O:T even if there was no result in M. Sometimes there is a result in M and I fail to put an entry in O:T. I need to be alerted as this happens, if possible. It will save hours of trying to track down my data entry errors.
BUT, there is already one conditional format already in M. It highlights the cell if it goes over 5 days for cleaning. =ISNUMBER(M10)*(M10>5).
If you can help, thank you very much. I thank you, my wife thanks you for me not doing overtime trying to track down my errors, my boss's thank you for making me more efficient and other forum readers may thank you for helping them to improve their sheets.
I want to be able to change font color for a row based on what is found in column J and K. In other words if J3 contains the letter M then row 3 should be Green. I know how to do this using conditional formating, however I have 2 problems.
First, I have 6 different conditions to meet.
Second, there is one more condition to meet. If the date in column K3 is older than todays date then row 3 should be turn Red regardless of what is found in column J3.
I am trying to use conditional formatting in Excel 2003 to indicate when certain tasks are overdue (by highlighting the cell in red). My problem is that I have multiple criteria. If my line item is a "priority" item, it is considered aged if not resolved after 2 days; if the line item is "routine", the item is not considered aged until after two weeks (14 days). My goal is:
1) I would like the "status" cell in column D (which says "open" or "closed") to turn red if the item is aged.
2) Aging depends on the "priority" status in column A .......
I want to create a chart than logs the progress of a project at work. Column 1 will have a series of target dates for certain tasks and column 2 will be filled in with the completed dates. I want automatically colour a cell (RC) based on the date given in the cell to the left (RC[-1]) giving a traffic light style warning of an upcoming target date and colour coding the cells when a task is completed on time (or not!). I can work out what the conditions are by creating 2 sets of 3 conditions (1 set if cell (RC) is empty and 1 set if cell (RC) has a date or "N/A" in it).
My conditions are:
1. Turn the cell background colour red (action overdue) if:
2. Turn the cell background colour orange (action required) if:
I have established that to have more than 3 conditions in my version of Excel (2003) i have to use VBA. Unfortunately I have very little knowledge of this process. I have attached an example of the worksheet I am working on. The worksheet in question totals hours worked for payroll. problem:
Required result: Cell to change to 1 of 8 background colours in response to selection of 1 of 8 options in drop down list in the cell directly next it.
i.e. (in reference to attachment - sheet DATA) IF E6 = Holiday, then D6 = Red IF E6 = Half Day Holiday, then D6 = Red IF E6 = Sick, then D6 = Blue IF E6 = Sick Half Day, then D6 = Blue IF E6 = Bank Holiday, then D6 = Green IF E6 = Compassionate Leave, then D6 = Pink IF E6 = Unpaid Leave then, D6 = Yellow IF E6 = Unpaid Leave Half Day then, D6 = Yellow
However, the same basic table as shown in sheet DATA appears several times on the worksheet. And in each instance the conditional formatting is the same (in reference to the relative cells).
I have a date in column A. I want to format to YELLOW column F based on whether column F is blank and 20 days past column A. I also want the formatting to change colors to RED if it remains blank past 30 days. Then, when column F is filled in I want the formatting to be removed.
I have two conditions for a cell. One is that it counts the time elapsed in cell M4, (=now()-J4). The other is whether or not we are still waiting for a response (in cell L4, Y or N). What I would like to do is make it so that when we are still waiting for a response the M4 cell is highlighted yellow if more than 3 days and red if more than 6 days, but if cell L4 is changed to "N", then the formatting goes away. II use Excel 2010.
I am using excel 2007 - I need the extra available columns in Excel 2007 for my application.
I have a spreadsheet that has a significant amount of conditional formatting. I want to copy a range from this spreadsheet to another spreadsheet. In the new spreadsheet I want to remove the conditional formatting rules whilst retaining the actual formats those rules generated.
Format painter and "paste special - format" copies any formats as well as the conditional format rules.
Is htere a method within Excel to do this or can someone suggest a workaround?
I am trying to work with conditional formatting to turn a field a specific color based on two conditions, one of which is variable. The first condition is a list of ongoing events (which can change) and the second condition is a set of known milestones. I want to create a control (check boxes?) that will turn a given field (which has dates in it from another calculation) to either Red, Yellow, or Green.
I was thinking two Dropdown boxes - one for the events and one for the milestones. The user would choose an event, choose the milestone, then choose a checkbox or something to change the color of a field elsewhere in the spreadsheet. Right now, I'm doing this in a very clumsy way by having three checkboxes for each milestone for each event. There are five milestones per event (so 15 checkboxes per event on Sheet2). I will likely have 70+ events so I was hoping for a better way to do this. I've done this for the first three events and need a more efficient way of doing this.
See the attachment : Event Milestones based on Go Date Uploadable.xlsx
i am trying to achieve old products on a database that we no longer have any stock of and we haven't sold since a specific date. I am having probems with an "=if(and" formula. At least i thin it is an equals if and formula that i need.
Basically i need to say the following:
=if(Stock quantity column = 0 and the date field is <= 31/12/2005 then "Delete" or "Keep")