Is there any way to access all the applications which are opened through only Excel.. Like creating a menu which will list all applications that are running.. like Word., other excel workbooks,Notepads etc?
If the admins or you would like to change or recommend a change, I am trying to figure out what the code would look like for cells B22:B28. I need it to count the number of occurrences of the part number in A4:A17 and then combine the applications from the corresponding cells in column F (F4:F170 into a single cell (B22:B28).
On sheet 2 I would manually copy/paste the list of part #s from sheet 1 and remove duplicates. The add the formula that I can't figure out into column 2.
I am trying to run multiple applications. I can run one application i.e.
Application.Run (Sheets("Sheet2").Range("A8").Value) but not multiple i.e Application.Run (Sheets("Sheet2").Range("A8").Value) & Application.Run (Sheets("Sheet2").Range("A9").Value) at the same time.
I have also tried Application.Run (Sheets("Sheet2").Range("A8:A9").Value) but to no avail.
How can I control non-Microsoft applications using VBA? For example, how can I open a pdf file, print it and then close Acrobat Reader?
View 5 Replies View RelatedA VBA macro uses the Shell command to open several DOS command boxes. Each DOS command box is copying a file from one location to another. Since I am copying the files over a network, it is most efficient to copy the files in parallel (simultaneously) rather than sequentially. I would like to pause the program until all of the files are copied, i.e., until all of the DOS command boxes have closed. Is there a way to pause the program until all command boxes are complete?
View 1 Replies View RelatedI have a macro that cycles every 5 minutes. I have tried everything I can to get this program to run while I modify a sheet in the workbook to no avail. I have however figured out that if I open up a separate excel application that my macro can continuously run without preventing me from modifying the other application. Now I need to figure out a way toggle between the two excel application windows if a condition is met. The basis of this is to allow production associates to create a schedule and modify it while a macro looks into the defect database and if a defect becomes too problematic, the macro interrupts the schedule to display the issue.
View 2 Replies View RelatedI am using MS Word to create a list to go into Excel, it seems advantageous to do it this way because I'm using the Heading Outline Numbering feature of Word.
Presently my macro assumes the word document is closed. How do I modify the macro to:
1. check if the file is open?
2. if already open, switch the focus to word?
3. switch the focus back to excel?
Sub GetDataFromWordDoc()
Dim FileToOpen As String
FileToOpen = ThisWorkbook.Path & "5Whys.doc"
Sheets("Data1").Select
' MsgBox "Active sheet is " & ActiveSheet. Name ' My check
ActiveSheet.Range("WordClear").Select ' Existing data to remove
Selection.Clear
Set appWD = CreateObject("Word.Application")
' here I would like to check if the word file is open
appWD.Documents.Open Filename:=FileToOpen '
appWD.Visible = True
appWD.Selection.WholeStory
appWD.Selection.Copy
Range("WTarget").Select ' Single cell range to start paste
ActiveSheet.PasteSpecial Format:="Text", Link:=False, DisplayAsIcon:= _
False
'Range("D3").Select
'ActiveSheet.Protect DrawingObjects:=True, Contents:=True, Scenarios:=True
Sheets("5_Why_O").Select
' At this point word in the fore, excel in the back,
End Sub
Is it possible to have a query that takes data from external applications?
View 3 Replies View Relatedso i'm building an application that'll allow users to manipulate records in Excel with just a GUI, using Userforms, Modules and Class Modules. it's all working but i'm feeling like i skipped a little on structuring it properly.
for example (from my Java work in college), you'd call just one object from the main method, which would create a GUI object, and create/manipulate instances of the different Classes when buttons are pushed. basically you one object whose main created other objects, who ran procedures, etc. what i'm hoping for is to make it as modular and easy to maintain as possible. would anyone have a good resource for optimising a medium-sized application? (the tips Excel/VBA Golden Rules. These Should NOT Be Optional were very good, by the way.)
I'm using a VBA UserForm (ShowModal=False) as the front-end on a spreadsheet for logging purposes. Here's the progression of the problem:
1. I have the UserForm loaded and the cursor is in any given textbox/ combobox on the form.
2. I switch to another program, then come back to the UserForm.
3. The cursor no longer appears in whatever textbox/combobox I was in when I left the UserForm. If I type, nothing happens (I have to click the field again first, then type).
However, if I TAB, it will go to the next field in the Tab Order just fine. It seems that the control has "pseudo-focus"--it knows which field to tab to next, but the control won't accept input unless you click it. The odd thing is--this UserForm has a button which launches another "child" UserForm. That "child" UserForm does not have this problem.
The VBA shell command is as follows:
programPath = "C:Program FilesInternet Exploreriexplore.exe" ' works
'programPath = "iexplore.exe" ' does not work
Shell programPath + " " + fileToLaunch, vbNormalFocus
but the drawback is that the invoked program (iexplore.exe, at least in my case) needs to have the FULL PATH to where the program exists = the "C:Program FilesInternet Explorer" which may or may not work on someone elses computer. This hardcoding will not work and is not transportable.
Is there a trick to find where the executing program lives? or launching it without the path?
I am Generating Excel file with Macro using my asp.net (c#) application.
I am able to generate Excel file in development environment, but in Production it gives following error:
"Programmatic access to Visual Basic Project is not trusted Line: Microsoft Office Excel"
I did googling a bit and found that I have to open Excel file physically make few security related changes in macro as below.
1. Open the Office application in question. On the Tools menu, click Macro, and then click Security to open the Macro Security dialog box.
2. On the Trusted Sources tab, click to select the Trust access to Visual Basic Project check box to turn on access.
3. Click OK to apply the setting. You may need to restart the application for the code to run properly if you automate from a Component Object Model (COM) add-in or template.
Can i do above changes at runtime (using some code)?
I have an Excel file ( named "Classes.xsl"), that has a worksheet (named "RawData") that is layed out something like:
Name Dept Class
John 0547 Class 1
Jane 0368 Class 1
Jim 0368 Class 2
Sue 1235 Class 2
I am trying to get an Access-Like report without utilizing Access. Is there a way to generate a report similar to below using Excel as the data source (could be mail merge, perhaps a macro with a printout) I am not sure which way to try and was hoping someone could point me in the right direction...and possibly provide an example.
Class EnrollmentClass 1John 0547
Jane 0368Class 2Jim 0368
Sue 1235
Is there a way to create an outside log of who has opened an excel file and when?
I am looking to add some accountability to a project.
I have macro enabled workbooks that the contract number increases by one everytime they are opened. Is there a way to make it auto save though when its opened. Right now I have to click save as soon as I open it. If I do not do this when I open it, when I open it again the contract number will stay the same as it was, because I save it at the end after I put all customer info in.
View 8 Replies View RelatedI am using ADO connections in my program to insert the datas in the excel. I want to find if the excel is locked by another user. How do i do this in ADO commands.
View 6 Replies View RelatedI want my macro on the IR Tracker sheet to run once workbook is opened. Is this possible?
I have attached the workbook for better understanding.
Is it possible to insert the filename automatically in formula after the input from the user?
I want to ask the user to input a filename and afterwards, call that filename in an Index-Match
I have the below formula with the sample filename:
ActiveCell.FormulaR1C1 = _
"=INDEX('[filename1.xlsx]DATA'!C9,MATCH(RC[1],'[filename1.xlsx]DATA'!C32,0))"
Range("A2").Select
How do I get one sheet to update from the other when I open both sheets. Somethign like an auto update. If I had two tabs on the same spreadsheet I would just use = but I can't use that with two different sheets.
View 3 Replies View RelatedI've started this thread a few weeks ago but didn't get any answers on how to solve the problem or if it was even possible to solve. I would like to know if is possible to set a reference to a NOT OPENED workbook. All the code I've tried so far didn't get me anywhere:
View 3 Replies View RelatedOpening it manually the dates in column C are all consistently date numbers. i.e. using the =ISNUMBER() function to test them, they all return True
However when I include the VBA instruction:
While using an userform, is it not possible to swap to other files in the window?
I.e Alt+tab function is not working while an userform is opened.
I have 3 Work books - one (WB1) checks its version number against an online record and if they dont match it opens WB2 which then proceeds to download the updated version copy information from WB1 to its self which it then pastes into WB3
WB1 then gets deleted and WB3 Renamed to the old name of WB1
the issue i have is when i open WB2 using the button that also checks for updates on WB1.
WB2's code seems to just stop when it gets to the point of updating WB3 no error messages or nothing it just stops!
NewMasters(2).xls = WB1
Updater.xls = WB2
NewVersion.xls = WB3
There are a lot of worksheets with a lot of similar data from which I have to determine the threshold. So if possible I would like to create a macro.
I want to know the threshold value when Y=2.
The threshold can be between different Input Values (=Stimulus Intensity (ľA)).
For example: the threshold of amp P2-N1 & P3-N3 lies somewhere between 200 and 252ľA. The threshold of P1-N1 lies somewhere between 318 and 400ľA.
Is it possible to determine the threshold value with a formula?
I would like to have a message box pop up when a file is opened requiring a user to enter information (Name), that would then put this name into a cell for later use when they are printing.
View 6 Replies View RelatedI am looking for a way to have Excel zoom to 120% whenever any workbook is opened. (My boss has poor eye sight...)
I set up a simple Macro
Code:
Sub Auto_Open()
ActiveWindow.Zoom = 120
End Sub
but I get an error that says "Run-time error '91': Object Variable or With block variable not set.
i'm trying to find out how i can determine if a template (.xlt) has been opened.. the name of the file generated is dynamic, and increments by 1 for each open count. this limits me from using an isWorkBookOpen() function, since i do not know the name, and my project does not allow me to save the file file before hand..
my thought was to set the .name value to the workbook object holding the template.. and then check to see if a workbook with that name is open.. but alas.. .name is readonly
how can i check to see if the template file is already open?
I have excel vba code to open .xls files on my server. Files to open are chosen by the user via a UserForm within my app, it shows them all their files in their directory on my server. How can I open their files (.xls) that they select but DISABLE the VBA from being able to run/execute, if they have any attched to the file?
I now have all code in place to open the file no problem, I just need to know how to disable the VBA part from being "turned on" when the file opens.
I run a macro which runs saves the active file to a different location to ensure that I retain the original like so -
If ActiveWorkbook. Name = "KEY_DATA_CFT77" + ".xls" Then
ActiveWorkbook.SaveAs Filename:= _
"H:HOME imcEXCELKEY_DATA_2006KEY_DATA_2006_01KEY_DATA_CFT77_01.xls", FileFormat:= _
xlNormal, Password:="", WriteResPassword:="", ReadOnlyRecommended:=False _
, CreateBackup:=False
End If .................................
Is it possible to write code that can identify how a workbook has been opened i.e. has the workbook been opened by another workbook or has it received a double click event on the workbook itself.
If it is possible I would like to place the code in the open event of the workbook that is being opened.