I need macro that will check for list of duplicates in sheet1 and place the duplicate data in sheet2.
I know how to check duplicates in only one column.But now my sheet having lot of columns.
I have 2 Worksheets in an Excel 2010 Workbook -
Sheet1
Column1: contains the word "dog"
Column2: contains the word "bark"
Sheet2
Column1: contains the sentence "I like dogs a lot."
Column2: is blank
What I need to do is search Sheet2/Column1 for the presence of "dog" and if it's present, populate the word "bark" in Sheet2/Column2 from Sheet1/Column2.
How can I do this?
I am trying to take information from one sheet(1) and place part of it on another sheet(2). I have a list of data ID numbers that are in a list of 7 and I want to pull the first in the list to place on sheet 2 and create a formula that will pick up every 7th ID number (or name) and place it on my sheet 2.
10221451022145102214510221451022145102214510221451100798110079811007981100798110079811007981100798
This is what I am working with, and just want the first number of the new sequence to show up on sheet two.
Is there a way to Cross-Reference two sheets to find the duplicates and highlight them or another way of making it defined? I do not want them deleted, just need to be able to tell who the duplicates are.
Sheet 1 data has
A1 - Email Address B1 - Contact Name
Sheet 2 data has
A1 - Email Address B1 - Contact Name
I want to be able to find the duplicated email address' in sheet 1. And both spreadsheets have over 10,000 email address'. Is this possible?
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
I am using the below code and it is not performing the operations of comparing and deleting the duplicate values from sheet1 and pasting unique values in sheet 1, p.s. Do not need values from sheet 2, just want to compare the sheet 1 with 2 and delete dups in sheet1.
[Code] .....
I am enlcosing a file that I partially acquired (the macro portion) and I am trying to add to that.
The workbook has a dde link in sheet 1, the macro will write the data to sheet2 at set times. I am creating a report of the data in sheet 2 in sheet3. at this point it is very rudimentary. I need some assistance to clean up the macro and the post of the dat in sheet2. I have created a detailed (probably over detailed) explanantion in sheet 1 in a text box.
I have:
- sheet1.xls, this is the source sheet.
column A = model numbers
- sheet2.xls, have the data that I need to copy to sheet1.xls
column C = product description text and in column D = product price
column G = product description text and in column H = product price
What I need to do is to write a Macro that:
open each row in column A in sheet1.xls and search in sheet2.xls in column C if it finds this text (model number) then it should copy row D (product price) and paste it to column E in the right row in sheet1.xls.
Also search in sheet2.xls in column G if it finds this text (model number) then it should copy row H (product price) and paste it to column E in the right row in sheet1.xls.
I hope please that you understand me.
And will be happy if someone could help me please to do that
I want to skip 1 row blank in two entries while transferring data from sheet2 to sheet1. There are about 100 entries on sheet2 which I want to transfer on sheet1. If I skip 1 row and paste the formula it skips 1 entry. How to avoide it?
View 1 Replies View RelatedDate & Time JOB NO PENDING
12/23/13 2:14 PM SICD-B00xxx *
My question is, there are three cells named- Date & Time, Job No and Pending. When I tick(*) in Pending named cell, I need to copied automatically the data of Date & Time and Job No to Sheet 2 in the same cells from Sheet
1. which formula I can use and how?
Sheet 1 : Date & Time (O5), Job No (Q5) and Pending (S5)
Sheet 2 : The same as Sheet 1
When I give * in Sheet 1 S5, the other data should copied to Sheet 2 in O5 and Q5.
I want to use formula in sheet 1 S5 because I have already used a formula in sheet 1 O5, as
IF(Q5<>"",NOW(),O5),"")
Can anyone tell me if is possible to copy data from sheet1 to sheet2 using VLOOKUP?
I had an interview where they asked me to copy data from sheet1 to sheet2.
I used the function (=Sheet1!A1:...) and for me it was right, but they told me that it was wrong since I did not use the (VLOOKUP) function.
Please confirm if VLOOKUP can be used in this regard.
I have some data in sheet1 (as per attached sheet), every month i have to enter this data more than 1000 rows..i want a formula so that automatically this data should go to sheet2 and get a seperate report shape (as mentioned in sheet2) and also add a row below of each report in case ColumnA (Shipp) data is increased for some shipp name and also report heading shoudl be change according to columnA (shipp) and renumbering it.
View 3 Replies View RelatedI have data in sheet1, which needs copied to sheet2
But in sheet2 already data is available. In Sheet2, i want code to go from header to down , to locate the first blank row in between data and to paste data by inserting same number of rows as number of rows copied.
Basically I have two sheets. Sheet1 and sheet2 on the same workbook. The sheet1 is where all data I want to extra to the sheet2.
Here is the sheet1 looks like:
1
B
C
D
E
F
2
Tester :
Mr.ABC
3
State :
CA
4
Phone :
123456
5
6
Header1
Header2
Header3
Header4
Header5
7
Value1
Value2
Value3
Value4
Value5
8
From B2 to D2 the cells are merged as well as the B3 to D3 and B4 to D4. Note: No Column A.
Here is the sheet2 looks like:
1
Tester
State
Phone
Header1
Header2
Header3
Header4
Header5
2
3
4
So, sheet2 has the header and what I need is to fill the information based on the sheet1.
I am thinking using the Vlookup but maybe VBA is better off to handle this situation?
I have workbooks which have data broken out of a larger file, I have solved the issue of updating the "Master List" from these broken out sheets. My problem is updating sheets. This has been done cut and paste manual style for some time and I am trying to streamline the work since being assigned to this project. I am trying not to change the workflow so I have to keep the sheets and work around the setup.
Sheet1 contains identical data as sheet2 with the exception of the completed work which is removed. In other words sheet2 contains an "assigned" list of work maybe 200 rows, this includes any work not yet completed in sheet1 as well as all the work previously completed but removed from sheet1 which may only contain 50 rows. Very simply, I want to parse through column A in both lists containing a specific ID number and match accross sheets, if column G and H on sheet1 match my needed criteria and column A from sheet 2 then copy that row from columns G:AT or 7 to 46, but only the values since there are formulas and formats I don't want in the updated sheet2 because the script I have for pulling from these sheets to the MasterList would fail.
As a bonus to eliminate the need to run another bit of code if I could delete the copied rows from sheet1 after they have been sent over to sheet2 would be great. Headings for all the sheets are the same so the data is identical. Column A is a customer ID number, G assumes initials from the clerk, and column H is date work completed. So if record A found and G=XX and H=Date then copy this rows columns G to AT values only. After which rows copied over will be deleted from sheet1. Headings are in row one and data begins on row two accross all sheets.
I have a large file + 400 000 rows that has zip code but not city name in sheet2, in sheet1 I have a list of zip code and city name. I need to get the correct city name for the zip code in sheet2 by using the info from sheet1. I attached a file as an example how it looks. I do have lots of other data in the original files that I have removed. This is not doable manually by using filter, to many rows so I need a script to run it.
View 2 Replies View RelatedFind herewith attached file of xls... for my query..
Test.xlsx
I want entry the data with different row and different cells, so when I click the button, the data on sheet1 is clear and copy to empty row on sheet2 and automatic create a border and automatic insert new row, so we can entry again and next. And I attached my sample Excel File with the description too.
View 10 Replies View RelatedI have extracted a lot of data (from a webpage), onto Sheet 1 of my Excel 2010. The results I have obtained of this data I have extracted might occupy cells A1 to F1.
I want to keep doing this over and over, copying and pasting data from a webpage onto Sheet 1, then obtaining various results and adding those results under cells A1 to F1, which would of course be A2 to F2.
Is there any way these results can be transferred to say Sheet2, but of course occupying a new line each time so that at the end of the day, I have a list of results.
Of course I could just copy and paste them to say Sheet2, under each other, just wondering if there was some tricky way.
Below is a snip-it of VBA code that I am using to try and create a table on Sheet2 which I have named "Summary Unsorted". Sheet1's name is "Diagnostic Measures". The range name, RawDataTable", is what I am copying from Sheet1 and pasting the values onto Sheet2 and want to create a simple table. The error I am getting is "The worksheet range for the table data must be on the same sheet as the table being created."
'Copy/Paste data from Dianostic Measures worksheet (Sheet1)
'to the Summary Unsorted worksheet (Sheet2).
Range("RawDataTable").Copy
[Code]....
I can't understand why my rate1() function (my macro) doesn't work properly. While I'm dragging M5 cell in Sheet2 down to M14 cell it gives the wrong result.
Even when I change value in Sheet1 and refresh data of pivot table in Sheet2, my function rate1() isn't updated. But my problem is solving (getting the correct result) when I'm going Edit Mode (pressing function key F2) in active Cell M5 or M6 or M7..so on and pressing Enter each time.
In Sheet1, i have a table like this:
Select Month
Actual Cost
Budget
Difference
[Code].....
I dont know how to do it here, but in Excel i have January (2columns) Febaruy (2columns) March tables. filled each table with its determinated data, and going down i have 3 more months, and so etc till i complete 12 tables one per month.
So now what i need is: That in Sheet1, where is Select Month be some kinda of drop down list, which allow me to pick the month i wanna see, and then when i pick. for example: April, then go to Sheet2, find the April table, and bringthe values to fill the table in Sheet1 , whatever option be, flirting, or copying just values, or filling the table. I really dont know what be easier.And then if i pick another month like October, do the same, etc.
I need to merge data from sheet 2 to data on sheet1.
Sheet 1 data is in the format given below with start date in G column and campaign ID in column H.
Start Date
Campaign ID
17-May-14
3834177
[Code].....
I need to look up Campaign ID of sheet 1 in sheet 2 and add all insertions and platform for that campaign to next columns i.e. I and J in sheet 1. For ex Campign ID 3834177 of sheet 1 has 5 insertions corresponding to it in sheet 2 hence the insertions and their Platform would transfer to sheet 1. Since Campign ID 3834177 is only in 2 rows on sheet 1, 3 more rows would need to be inserted in sheet 1 to accommodate 5 items and it would look like.
Start Date
Campaign ID
Insertion ID
Platform
[Code].....
I have data in sheet 1 like below
Custid loc city
123 us newyork
124 uk wales
876 in mumbai
Sheet 2
custid newcustomerid
123 756
124 394
Outputsheet:
Custid loc city
756 us newyork
394 uk wales
876 in mumbai
So it will check sheet1 custid with sheet2 custid. If both matches it will replace custid with newcustid.if cust id not exists it will load sheet1 recprds as usual.
I have two column (A and B) text data in worksheet1. If I type same text of column A (of worksheet1) in worksheet 2 column A, how can I retrieve data from worksheet 1 to 2 from same row.
View 1 Replies View Relatedhow to copy data from one workbook to another workbook.
here's the process
1. Button upload is in book1 sheet 1
2. Copy data from book to book 1 sheet 2
Here's my code for starters.
[Code] ....
I have a value in a cell in Sheet2 (in this case its price per ft), on sheet1 is where I would input the number of feet. So can I multiply from data in cell on Sheet2 from cell on Sheet1and if so....
View 6 Replies View RelatedI need a macro which read out the last (in this file Pos. 4) or a user seleted Position (Position 2 or 1). The macro should read out the cells in this row and put the data into the defined cells in Sheet2.
in this case:
Data from B4[Sheet1] copy to B5[Sheet2]
Data from C4[Sheet1] copy to C7[Sheet2]
Data from D4[Sheet1] copy to E6[Sheet2]
The cells in Sheet2 are the same every time. Only the data (the row) in Sheet1 does change. I add more Position every week in Sheet1.
I have a workbook with sheet1 and sheet2. Each sheet I am only dealing with columns A-D. The data in column A in both sheets is the unique identifier. The below macro I am using will take sheet1 (ColumnA) and compare to sheet2 (ColumnA). If the identifies are the same in both cells it will highlight it green.
What I need to add to the below macro is the ability to add a cell copy over. So sheet1 being my master, if sheet1 and sheet2 have a equal identifier in column A, the data from sheet1 B,C,D for that row will be copied over to sheet2 of its equal identifier sheet2 B,C,D.
I have attached a sample : Sample Copy Over.xlsx
I want to find a value from Sheet1 in Sheet2. The code below has worked in the past, but this time Sheet2 has the value as a result of a function and it doesn't seem to recognize it. What do I need to change to make it work?
Sheet1 - the value is a number that has been typed in
Sheet2 - the number is the result of a function
[Code] .....
