Change Value In Sheet1 And Refresh Data Of Pivot Table In Sheet2
Aug 28, 2009
I can't understand why my rate1() function (my macro) doesn't work properly. While I'm dragging M5 cell in Sheet2 down to M14 cell it gives the wrong result.
Even when I change value in Sheet1 and refresh data of pivot table in Sheet2, my function rate1() isn't updated. But my problem is solving (getting the correct result) when I'm going Edit Mode (pressing function key F2) in active Cell M5 or M6 or M7..so on and pressing Enter each time.
View 4 Replies
ADVERTISEMENT
Mar 17, 2014
Below is a snip-it of VBA code that I am using to try and create a table on Sheet2 which I have named "Summary Unsorted". Sheet1's name is "Diagnostic Measures". The range name, RawDataTable", is what I am copying from Sheet1 and pasting the values onto Sheet2 and want to create a simple table. The error I am getting is "The worksheet range for the table data must be on the same sheet as the table being created."
'Copy/Paste data from Dianostic Measures worksheet (Sheet1)
'to the Summary Unsorted worksheet (Sheet2).
Range("RawDataTable").Copy
[Code]....
View 9 Replies
View Related
Feb 26, 2014
I have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
View 2 Replies
View Related
Oct 4, 2013
I have 2 Worksheets in an Excel 2010 Workbook -
Sheet1
Column1: contains the word "dog"
Column2: contains the word "bark"
Sheet2
Column1: contains the sentence "I like dogs a lot."
Column2: is blank
What I need to do is search Sheet2/Column1 for the presence of "dog" and if it's present, populate the word "bark" in Sheet2/Column2 from Sheet1/Column2.
How can I do this?
View 4 Replies
View Related
Feb 1, 2010
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
View 14 Replies
View Related
Feb 6, 2008
I have an existing pivot table that is feeding from data in another sheet.
The data gets updated every month and sometimes their are more columns of data than the previous month. Everytime there are more columns they are not added into the pivot table when i refresh the table even though they are included in the range.
Is there are way the pivot table will add these new columns when i refresh the table without me having to manually drag them in?
View 9 Replies
View Related
Apr 30, 2014
I am using an Excel file (Raw.xlsx) to store my raw data, and take another Excel file (Pivot.xlsx) to make PivotTable from Raw.xlsx
When generating the PivotTable, every works fine. When click [Refresh] in the Raw.xlsx, whatever changes been made in the Raw.xlsx can "sync" to the Pivot.xlsx
However, once I save and reopen the Pivot.xlsx, I can't refresh the PivotTable anymore. I've tried changing Data Source, but it doesn't work.
View 1 Replies
View Related
Aug 13, 2014
I am using the below code and it is not performing the operations of comparing and deleting the duplicate values from sheet1 and pasting unique values in sheet 1, p.s. Do not need values from sheet 2, just want to compare the sheet 1 with 2 and delete dups in sheet1.
[Code] .....
View 2 Replies
View Related
Nov 27, 2007
Will someone please tell me the difference (if there is a difference) between the following 2 lines of ....
View 6 Replies
View Related
Dec 4, 2013
I have a pivot table report connected to an external data source (OLAP cube).I want to automatically refresh the pivot table report everytime the OLAP cube data changes.
I know we can use Automatic refresh on open of workbook or time intervals after which to refresh .But i want the auto refresh to work even if the workbook is already open and there is no definite time interval after which the cube is likely to change.SO,by defining intervals for auto refresh i do not intend to waste time refreshing even if there is no change.
There are multiple pivot table reports and pivot charts connected to the same OLAP cube.
View 1 Replies
View Related
Aug 28, 2009
I am enlcosing a file that I partially acquired (the macro portion) and I am trying to add to that.
The workbook has a dde link in sheet 1, the macro will write the data to sheet2 at set times. I am creating a report of the data in sheet 2 in sheet3. at this point it is very rudimentary. I need some assistance to clean up the macro and the post of the dat in sheet2. I have created a detailed (probably over detailed) explanantion in sheet 1 in a text box.
View 11 Replies
View Related
Dec 3, 2007
I have:
- sheet1.xls, this is the source sheet.
column A = model numbers
- sheet2.xls, have the data that I need to copy to sheet1.xls
column C = product description text and in column D = product price
column G = product description text and in column H = product price
What I need to do is to write a Macro that:
open each row in column A in sheet1.xls and search in sheet2.xls in column C if it finds this text (model number) then it should copy row D (product price) and paste it to column E in the right row in sheet1.xls.
Also search in sheet2.xls in column G if it finds this text (model number) then it should copy row H (product price) and paste it to column E in the right row in sheet1.xls.
I hope please that you understand me.
And will be happy if someone could help me please to do that
View 9 Replies
View Related
Jun 18, 2014
vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
View 1 Replies
View Related
Jul 8, 2014
I want to skip 1 row blank in two entries while transferring data from sheet2 to sheet1. There are about 100 entries on sheet2 which I want to transfer on sheet1. If I skip 1 row and paste the formula it skips 1 entry. How to avoide it?
View 1 Replies
View Related
Dec 28, 2013
Date & Time JOB NO PENDING
12/23/13 2:14 PM SICD-B00xxx *
My question is, there are three cells named- Date & Time, Job No and Pending. When I tick(*) in Pending named cell, I need to copied automatically the data of Date & Time and Job No to Sheet 2 in the same cells from Sheet
1. which formula I can use and how?
Sheet 1 : Date & Time (O5), Job No (Q5) and Pending (S5)
Sheet 2 : The same as Sheet 1
When I give * in Sheet 1 S5, the other data should copied to Sheet 2 in O5 and Q5.
I want to use formula in sheet 1 S5 because I have already used a formula in sheet 1 O5, as
IF(Q5<>"",NOW(),O5),"")
View 3 Replies
View Related
Apr 12, 2009
Can anyone tell me if is possible to copy data from sheet1 to sheet2 using VLOOKUP?
I had an interview where they asked me to copy data from sheet1 to sheet2.
I used the function (=Sheet1!A1:...) and for me it was right, but they told me that it was wrong since I did not use the (VLOOKUP) function.
Please confirm if VLOOKUP can be used in this regard.
View 8 Replies
View Related
Oct 27, 2009
I have some data in sheet1 (as per attached sheet), every month i have to enter this data more than 1000 rows..i want a formula so that automatically this data should go to sheet2 and get a seperate report shape (as mentioned in sheet2) and also add a row below of each report in case ColumnA (Shipp) data is increased for some shipp name and also report heading shoudl be change according to columnA (shipp) and renumbering it.
View 3 Replies
View Related
Apr 24, 2014
I have data in sheet1, which needs copied to sheet2
But in sheet2 already data is available. In Sheet2, i want code to go from header to down , to locate the first blank row in between data and to paste data by inserting same number of rows as number of rows copied.
View 3 Replies
View Related
Jan 10, 2014
Basically I have two sheets. Sheet1 and sheet2 on the same workbook. The sheet1 is where all data I want to extra to the sheet2.
Here is the sheet1 looks like:
1
B
C
D
E
F
2
Tester :
Mr.ABC
3
State :
CA
4
Phone :
123456
5
6
Header1
Header2
Header3
Header4
Header5
7
Value1
Value2
Value3
Value4
Value5
8
From B2 to D2 the cells are merged as well as the B3 to D3 and B4 to D4. Note: No Column A.
Here is the sheet2 looks like:
1
Tester
State
Phone
Header1
Header2
Header3
Header4
Header5
2
3
4
So, sheet2 has the header and what I need is to fill the information based on the sheet1.
I am thinking using the Vlookup but maybe VBA is better off to handle this situation?
View 7 Replies
View Related
Apr 15, 2006
I have workbooks which have data broken out of a larger file, I have solved the issue of updating the "Master List" from these broken out sheets. My problem is updating sheets. This has been done cut and paste manual style for some time and I am trying to streamline the work since being assigned to this project. I am trying not to change the workflow so I have to keep the sheets and work around the setup.
Sheet1 contains identical data as sheet2 with the exception of the completed work which is removed. In other words sheet2 contains an "assigned" list of work maybe 200 rows, this includes any work not yet completed in sheet1 as well as all the work previously completed but removed from sheet1 which may only contain 50 rows. Very simply, I want to parse through column A in both lists containing a specific ID number and match accross sheets, if column G and H on sheet1 match my needed criteria and column A from sheet 2 then copy that row from columns G:AT or 7 to 46, but only the values since there are formulas and formats I don't want in the updated sheet2 because the script I have for pulling from these sheets to the MasterList would fail.
As a bonus to eliminate the need to run another bit of code if I could delete the copied rows from sheet1 after they have been sent over to sheet2 would be great. Headings for all the sheets are the same so the data is identical. Column A is a customer ID number, G assumes initials from the clerk, and column H is date work completed. So if record A found and G=XX and H=Date then copy this rows columns G to AT values only. After which rows copied over will be deleted from sheet1. Headings are in row one and data begins on row two accross all sheets.
View 2 Replies
View Related
Mar 4, 2014
I have a large file + 400 000 rows that has zip code but not city name in sheet2, in sheet1 I have a list of zip code and city name. I need to get the correct city name for the zip code in sheet2 by using the info from sheet1. I attached a file as an example how it looks. I do have lots of other data in the original files that I have removed. This is not doable manually by using filter, to many rows so I need a script to run it.
View 2 Replies
View Related
Mar 19, 2013
Find herewith attached file of xls... for my query..
Test.xlsx
View 14 Replies
View Related
May 19, 2009
I want entry the data with different row and different cells, so when I click the button, the data on sheet1 is clear and copy to empty row on sheet2 and automatic create a border and automatic insert new row, so we can entry again and next. And I attached my sample Excel File with the description too.
View 10 Replies
View Related
Dec 26, 2011
I have extracted a lot of data (from a webpage), onto Sheet 1 of my Excel 2010. The results I have obtained of this data I have extracted might occupy cells A1 to F1.
I want to keep doing this over and over, copying and pasting data from a webpage onto Sheet 1, then obtaining various results and adding those results under cells A1 to F1, which would of course be A2 to F2.
Is there any way these results can be transferred to say Sheet2, but of course occupying a new line each time so that at the end of the day, I have a list of results.
Of course I could just copy and paste them to say Sheet2, under each other, just wondering if there was some tricky way.
View 3 Replies
View Related
Jun 30, 2014
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
View 5 Replies
View Related
Mar 25, 2014
In Sheet1, i have a table like this:
Select Month
Actual Cost
Budget
Difference
[Code].....
I dont know how to do it here, but in Excel i have January (2columns) Febaruy (2columns) March tables. filled each table with its determinated data, and going down i have 3 more months, and so etc till i complete 12 tables one per month.
So now what i need is: That in Sheet1, where is Select Month be some kinda of drop down list, which allow me to pick the month i wanna see, and then when i pick. for example: April, then go to Sheet2, find the April table, and bringthe values to fill the table in Sheet1 , whatever option be, flirting, or copying just values, or filling the table. I really dont know what be easier.And then if i pick another month like October, do the same, etc.
View 1 Replies
View Related
May 1, 2014
I need to merge data from sheet 2 to data on sheet1.
Sheet 1 data is in the format given below with start date in G column and campaign ID in column H.
Start Date
Campaign ID
17-May-14
3834177
[Code].....
I need to look up Campaign ID of sheet 1 in sheet 2 and add all insertions and platform for that campaign to next columns i.e. I and J in sheet 1. For ex Campign ID 3834177 of sheet 1 has 5 insertions corresponding to it in sheet 2 hence the insertions and their Platform would transfer to sheet 1. Since Campign ID 3834177 is only in 2 rows on sheet 1, 3 more rows would need to be inserted in sheet 1 to accommodate 5 items and it would look like.
Start Date
Campaign ID
Insertion ID
Platform
[Code].....
View 1 Replies
View Related
Mar 8, 2014
I have data in sheet 1 like below
Custid loc city
123 us newyork
124 uk wales
876 in mumbai
Sheet 2
custid newcustomerid
123 756
124 394
Outputsheet:
Custid loc city
756 us newyork
394 uk wales
876 in mumbai
So it will check sheet1 custid with sheet2 custid. If both matches it will replace custid with newcustid.if cust id not exists it will load sheet1 recprds as usual.
View 1 Replies
View Related
Apr 14, 2014
I have two column (A and B) text data in worksheet1. If I type same text of column A (of worksheet1) in worksheet 2 column A, how can I retrieve data from worksheet 1 to 2 from same row.
View 1 Replies
View Related
Mar 13, 2014
I need macro that will check for list of duplicates in sheet1 and place the duplicate data in sheet2.
I know how to check duplicates in only one column.But now my sheet having lot of columns.
View 14 Replies
View Related
