i have an excel sheet with two columns, and depending on the status of the equipment, i need to compare the two columns and if the data is the same, fine, otherwise i need to display a msg box with an error. the columns have formulas in them, and i assigned a name to the cells i want to check, i keep getting errors with the following code, when the colums are the same, it is still displaying the msg box with the error. what am i doing wrong?
For Each Row In Range("Dev_Found") 'Loop through each row in Column C
If Row.Value ActiveWorkbook.Names.Item("Dev_Left").Value Then
blah = MsgBox("Your % Dev for after does not match % Dev before, please correct on form!", vbOKOnly, "Error")
Exit For
End If
Next Row
I am wanting to build a macro to calculate the average of a range of cells. I have about 2000 lines of data, and I want to average the first 12 cells (then paste the answer somewhere else), then average the next 12 cells, and so on. Using a loop to do this is simple enough. My problem is that I can't insert variables into the average formula as the cells to be averaged
Sub AutoAverage() For x = 0 To 20 For y = 0 To 171 FirstRowRef = Workbooks("NP FT01-03 010206.xls"). Sheets("NP - FT01") _ .Range("a5").Offset(12 * y, 12 * x) LastRowRef = Workbooks("NP FT01-03 010206.xls").Sheets("NP - FT01") _ .Range("a16").Offset(12 * y, 12 * x) Workbooks("Mega Spectrums.xls").Sheets("NP - FT01").Range("a5").Offset(y, x).Select ActiveCell.FormulaR1C1 = "=AVERAGE(FirstRowRef:LastRowRef)" Next y Next x End Sub
I have been handed a workbook which has been used and amended by a number of people over about 5 years. The workbook has lots of named ranges, many of which are obviously now defunct. Others may be defunct but I'm not sure. I would like to delete all of the defunct ones.
Does anyone know a way in which I can identify the cells in which a named range is currently being used?
I have a workbook with several sheets and named ranges like ES_Date, ES_Range, ES_Volume or MC_Date, MC_Range, MC_Volume. The 1st two letters are the name of the sheet where the named ranges are located (one is dates, another volume, etc.).
What I'm trying to do is calculate averages, extract maximum and minimum values from the the named ranges using a start and end date that are entered in cells "H6" and "I6". The formula I am using right now is:
I need to select in a sheet the cells which have name reference to see if the whole sheet is dependent , i have tried to trace the dependents and precedents but that didnt work,
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
" A B C D | SUMMARY model qty| modelqty 1 4.12922.0000| 4.12952.2000 2 2.000012.1250| 2.000025.1250 3 4.12929.0000| 318.0000 4 318.0000| 5 4.1291.2000| 6 213.0000| "
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
I am trying to make a UDF that searches for a header, grabs everything under the header, and pulls it somewhere else. My UDF has three parameters:
1) Output_Range: the named range where the parameters will be pulled to 2) Header: the header to search for in order to copy the data underneath it 3) WorkbookName: the name of the workbook to search in
It looks like this:
VB: Function LoadParameters(Output_Range As Range, Header, WorkbookName As String) MyTimer = Timer 'Defining the variables. Dim HeaderCell, HeaderCellEnd, HeaderRange, Output_Range
I have some named ranges that refer to 5 pieces of data organized into a row. For example, the name MyNamedRange might refer to $C$5:$C$10.
I am trying to loop through each column and get the values in MyNamedRange, then change corresponding values in a different named range. However, when I try to use Offset to access the subsequent columns of MyNamedRange, it doesn't work. It only gets the value of the first column right, the rest return <EMPTY>.
How do I go about using named ranges instead of cell names(ie A4:A9)
Private Sub UserForm_Activate() Dim lngRow As Long Dim intIndex As Integer UserForm1.ComboBox1.Clear 'Clear combobox lngRow = 2 Do While Sheet1.Range("a" & lngRow).Value <> "" For intIndex = 0 To UserForm1.ComboBox1.ListCount - 1 If UserForm1.ComboBox1.List(intIndex) = Sheet1.Range("a" & lngRow).Value Then Goto NextRow End If Next intIndex UserForm1.ComboBox1.AddItem Sheet1.Range("a" & lngRow).Value NextRow: lngRow = lngRow + 1 Loop End Sub
I wanted to change "a" to the defined range "search"?
the code to add two independent named ranges cell by cell in vba. Both of the named ranges have the same structure and the sum would be posted to a third area of the same structure cell wise.
A 1 1.1 A 2 1.2 A 3 1.3 B 1 1.1 B 2 1.2 B 3 1.3 C 1 1.1 C 2 1.2 C 3 1.3
This is imported from else were and AutoFilter by machine then number and value every time a new record is added to the list. I want to have three charts in the sheet (one for A, one for B and one for C) and i need to be able to set the data source ranges dynamically.
I have a macro i mind that will search the first column cells one at a time. something like:
Sub marco1() 'find A limit range("a1").select For row=1 To 100 Step 1 If cells(row,1).value<>"A" Then ARowFin = row-1 exit For End If Next row
End Sub
This will find the last "A" cell's reference by index numbers as cell(ARowFin,1) But i can't find how to then use this format to select a range.
The "range" function only uses A1 notation for multiple cell selection. How do i use index notation to set a range?
If i can work this out then i can set: r1 = that range and a second range r2 in a similar fashion, then set the data source range as a union of these ranges.
At the moment I have to click in the cell and then look at the cells used and look across to the title of the rows.
So for example, performance = D3*D4*D5*D6
I would like, performance = vehicles*availabliity*utilisation*TKM.
That is easy if I have just 1 option. But what if I have 3 options? Naming each cell would be a way to do it but pretty laborious, is there a 'smart' way to use named ranges here?
I'm creating a KPI spreadsheet which utilizes named ranges to allow for Dynamic charting. I've created the first data input sheet for one of the 10 areas being KPIed. The sheet has 60 named ranges in it.
The goal is to duplicate the existing sheet (Area 1A) 10 times and adjust the named ranges and formulas within the named ranges according to the sheet names.
Is there a way to accomplish this without having to manually recreate or edit every named range for each new sheet?
I want a sumIF function (based on three criteria) to fill the values of cells in a column so long as there are values in the cells in the column before that one. I was working with trying a loop, but have been shown a faster way is using the With function.
There are four named ranges that all exist on a separate sheet in the file: Crude, Location, Year and Volume. Based on the first three columns of the file I wish to have an output for the sum of volume based on crude, location and year.
Right now, my output simply returns the total sum of the "volume" range in each cell in the output column.
For example, if total sum of values in the volume column is 100 then my output column currently looks like:
I created a simply macro that will adjust the headings of a group of cells as follows.
But if I add a row/column to the sheet, it will then of course attempt to place the headings in the wrong cells.
I have now given that group of cells/range a Name of "AR_Buckets". But I'm not certain how to modify the macro to ensure it always places the information in the correct place.
I am having problems getting the code below to follow my intentions. I have 2 files. I have a temporary file that holds all the data that I need. I have a destination file that needs to have data copied into it. In the temp file, I have data for several dates and product types. What I intend to do is to do a vlookup in VBA to look for the date and the product type in the temp file and copy the appropriate data to the destination file. I have numerous named ranges both in my temp file and my destination file. For the code below, I wanted to make a loop to find the date in the temp file that is listed in the destination file. Once this is done, I wanted to find the product type in the temp file that is listed in the destination file. If both conditions exist, then copy a certain range from the temp file to the destination file. My intention is evident in the code, but I don’t think that I am putting in the correct “code format”.
(Using Office 2003 on XP Pro) I have two named ranges that I want to union into one big named range so that I can use the big named range in a validation table. Unfortunately the big range does not appear on the list of named range so I switched to VBA to try and lick this but really I was hoping a non-VBA solution exists. Exploring possible VBA solutions, here is what I have so far:
I'm trying to make my worksheet generate a bunch of named ranges whenever it is activated. However, I'm getting a "Not a valid name" error on the line in red. The value of r is a string, so I really don't see what the issue is. Another time, I got a object defined error, but I think I've declared everyhing too. That line is very similar to the line above, and tends to work once (the first time around the loop). After that, I get the errors I mentioned.
I have two named ranges, LV1 and LV2 and wish to select them for printing. If the ranges were fixed I would use - Range("A2:H4,A8:H10").Select - how do I do the equivalent using the named ranges in vba?
The worksheet contains 20 different datasets which are divided into separate 30 x 10 grids, all of which help comprise a larger 300 x 20 grid. I have defined each smaller grid/dataset as its own named range. Originally the entire dataset started in A1, but I am shifting it dataset down by 40 lines to create space to work at the top of my workbook.
I am wanting to create a data validation list in A1, then have cells A3:J32 populate with the named range I select in A1. However I also want this populated dataset at the top of the sheet to be a mirror -- not a copy.
Therefore once I have the data in my range available A3:J32, anything I manipulate would be mirrored in the original range in the lower portion of the workbook.
I am importing an external Sheet into my Excel workbook but it only imports the data not the named ranges. I need the named ranges to be imported and overwrite any existing range of same name.
Example:
In existing workbook Sheet I have a named range, ABC which is A1:E10 - in the Sheet I am importing the ABC range is A1:E12. So when I have done import I want named range ABC in my workbook to become A1:E12 (as per external Sheet).
This is the code that import data (but not named ranges)
=VLOOKUP('ITEM ADD-CHG Form'!Z19,Brand_V,2,FALSE) Another wrench!. If the value in cell Z19 is not found in the named range "Brand_V", the formula returns #N/A. I need to replace #N/A with the verbiage DEF while leaving the other results intact.
I have some named ranges and am trying to do a "Countifs" based off the named ranges. But Excel is giving me obvious incorrect data (my fault, not Excel's). I can't really post a pic of the issue, hopefully it's an obvious error on my part.
For instance
SpecialPart is a named range consisting of part numbers that I want to count seperately from all others.
PartNumber is a named range of all parts shipped for a period.
I used countifs becuase I am also checking by month. The month part works fine because I use it in other countifs. It's just this one that isn't working for me.
As mentioned, the month part of the formula works in other calculations, but the Part/SpecialPart calculation keeps returning a "1" even though there are multiple instances of a match for each month. A manual count of January showed about 100 lines that should have been counted.
I'm trying to learn more about the SUMIFS and COUNTIFS functions and am practicing with some hypothetical data. I have data about the number of gallons of paint sold in 4 regions.
In my hypothetical situation, I need to find out the number of gallons sold in the Northeast region during the month of August.
I have named ranges for most categories: "Date," "Gallons_Sold," "PaintColors," and "Region."
