I would like to use conditional formatting to highlight the max value if the constraints are not violated.
For example,
Row 91 - Profit
Row 94 - Constraint A (750<=A<=855)
Row 95 - Constraint B (12<=B<=17)
So, I tried to type this in conditional formatting but it didn't work ><
=MAX(IF(AND(B94>=750,B94<=855,B95>=12,B95<=17),$B$91:$Q$91,0))
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
View 9 Replies View RelatedI am trying to nest an IF function with a CEILING function. If C10 is < 3.5, make it 3.5, however, if C10 > 3.5, CEILING (C10, 5)
right now it looks like:
If (C10
Is it possible to use OR function in Conditional Formatting? I want to do the following.
If A1 = 1, A2 cell is filled in Red
If A1 = 2, A2 cell is filled in Red
If A1 = 3, A2 cell is filled in Green,
If A1 = 4, A2 cell is filled in Green,
I only managed to do the above for 3 conditions as Conditional Formatting only allows me to no more than 3.
I have three columns named "Type" , "start_date" and "end_date".
Type column can hold only "A","B" and "C".
start_date and end_date columns are time stamps. ex: 9/14/13 9:35 AM
I want to do conditional formatting like,
If type = "A" and (end_date - start_date) value between 30 and 40 (in hrs) then it should be amber.
I did for greater than and lesser than values, but I am facing problem while doing the above one.
I would like a date in a cell to flag up in a colour (say, red) once the date has expired by a certain period (e.g 7 days). How can I do this (conditional format).
View 2 Replies View RelatedCan I have more than 3 conditions for the conditional formatting function?
View 9 Replies View RelatedI have an "actual build" worksheet, which allows the user to select which materials were used, material properties (e.g. material grade etc.), including its corresponding length. The user can enter all these in manually, or select the material name from a pre-defined list (Reference worksheet contains this information), and then the associated properties are automatic lookups from the Reference worksheet.
So all this is fine / completed, and the LOOKUP returns its theoretical length from the reference table. However, its actual material lengths will almost never match the theoretical length, so what I want to happen is for a conditional format to highlight the cell, to notify the user that they need to enter a manual value. The auto-looked up length is still useful a proposed build on the worksheet, but having it highlighted to ensure it is manually entered later is the objective.
The other thing is it can't just check if it's a formula, it has to check if it is a formula with a MATCH/LOOKUP function. E.g. it needs to be unhighlighted if someone has a basic formula, ie = 2*0.42 if there two of the item etc..
Hence, I was thinking of having a conditional formula that "format only cells that contain" and then format only cells with "specific text" and "containing" and "MATCH(" text function, however this doesn't seem to work.
Length cell formula:
=OFFSET('Reference- Materials'!$N$5, MATCH($BO32, Materials_Item_Number, 0), 0) * $AH32
Using Excel 2010.
The background to this question is that I'm trying to replicate conditional formatting using a user VBA function, because I require a thick border around the cells (and the conditional formatting within Excel only has thin borders)
In the final function, there will be 9 combinations of formatting {Red, Amber, Green} interior with {Red, Amber, Green} thick borders.
The formatting is determined by a number in another cell (the "target" cell), which returns a value 0,...,8
I've only got as far as filling in the interior for the first combination, but the function returns an error "Application-defined or object-defined error".
VB:
Function VBA000_003_SetRAG(strTargetRange As String) 'strTargetRange is the reference for the target cell that contains the value 0,...,8
On Error Goto handler [code]....
There is not a problem with the target range, if I remove the two lines relating to rngCaller then the function works OKExecuting the rngCaller.Interior.Color = RGB(255, 0, 0) command through the Immediates window works OKI've tried calling a subroutine & passing the range across
Same errorChanging the range in the subroutine to an absolute range (eg. Sheet1.range("A1")) also causes the
same errorExecuting the subroutine on its own (with the absolute range) works OK
So my guess is that it's a bug/limitation with Excel VBA when trying to execute commands from inside a user function
When I hit the macro code you see below I get both columns D and E, starting from row 18, to get 'filled down' to the specified spot. Every second row has a conditional format (when a value is entered in column A) to change the row to the color grey, and every row between it has a conditional format (when any value is entered in column A as well) to have the row changed to the color red. The issue here is that the Macro code messes up the conditional formatting and uses the conditional formatting of those two cells, which are being dragged down, for those entire filled-down columns! This is what I am starting off with test1.xlsm and this is what I end up with using the macro code below (or doing it manually)
test2.xlsm
Is there a way for the Macro code to bypass this issue?
I have a spreadsheet that lists a set of actions and the days they need to be completed.
The due dates are listed in column c and in column h I have a the user choosing "completed" from a drop down data validation.
I have a dashboard on a separate worksheet, showing if the item is complete and the due date.
Ideally I would like to display the dates on the dashboard in red if they are past due, and the box in column h was not marked complete.
I have been going through my books and trying to solve this, but I run into a different issues.
Even if for now If I can get the main worksheet to display the color conditional formatting that would work
A little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.
dust 1.xlsx
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:
if(A1=blue background,"Yes","No")
or
if(A1=red text,"Yes","No")
etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.
Any VBA that I can put into a macro that will convert conditional formatting into fixed formatting..? So when the cell contents/formulas are deleted the formatting remains. Assume that the range I want to convert is A1:D200...
View 9 Replies View RelatedCell A1: International Studies Academy (P) 9-12
Cell A2: Public
Is there a way that I can get Cell A2 to fill red when cell A2="Public" and A1 contains "(P)"?. I can't seem to get a formula to work yet.
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedIn a column, there are 4 option for each cell -
"PAYMENT DUE"
"PAID"
"UNDERPAID BY..."
'OVERPAID BY..."
These are filled in by a formula
I would like to make them 4 different colours but excel only allows 3 options
I have a hard time when it comes to "If then" statements and conditional formatting. I have some data that I am collecting and entering into a spreadsheet for a couple different companies. Once I receive paperwork from those companies for the data collected I mark the data with a blue colored text. I would like to have a second sheet that generates what companies have not sent me their paperwork. "If the data is black text, then generate <name of company> on second sheet." The list is small right now, but as the project continues it will grow very large and it will become difficult to track. I will attach a copy of the spreadsheet for you to see the situation. I would like to learn how to do these types of formulas, is there a tutorial geared towards these types of situations?
View 2 Replies View RelatedI seem to have a problem using conditional formatting with Vba in Excel 2003
When I run -
Must admit the R1C1 still confuses me, but somehow I have this working. Currently the RC4 displays in conditional format as $D8 and the RC4 as $C8, but I'm confused at how it knows to start at R8? Is there any way to make the formulas read ="=$D8=""No""" instead?
View 2 Replies View RelatedI have two spreadsheet "book1" with data in it, "book2" that takes all the information from "book1" the cells are linked in "book2" from "book1" so when someone updates "book1" the information is viewable in "book2"
In "book2" where I am getting stuck is as follows,
Column A contains data "break time" that is formatted in HH:MM:SS column B contains a "total duration" in HH:MM:SS. what I need to do is if column A data is = to or more than 4% of column B then I want to turn the cell in column A "red" if it is less then turn it "green". I have tried conditional formatting and it appears to work the once only, I dont no if this is because its 2003 and not 2007??
What I need is to repeat the conditional format over and over again forever is there any code for this I can use?
I have used conditional formatting various ways to format an individual cell. I was wondering does anyone know if it is possible to conditionally format a row? Eaxmple: If D7=Manager, then format A7 through Z7. If so, how would I go about setting that up?
View 3 Replies View RelatedI'm wanting to create a formula in column B that will return a value of 10 if column A is any value between 70% -100%, will return a value of 5 if column A is any value between 50% - 69%, and will return a value of 1 if column A is any value between 1% - 49%. Can you help me?
View 6 Replies View RelatedI want to do an if (I think I do??) command so that if a1=b1, then the cell turns blue and if a1=0, the cell turns red, with the false statement just being blank.
View 3 Replies View RelatedI have data in column B.
And if the below mentioned values are present in column "B" then the cell colour should change to "RED Colour"
Bombay
Mumbai
Bangalore
if any other values other than the above mentioned then the cell format should remain as is.
I have my formulas in place and they are working. The reason why some are coming up with #DIV/0 is because I do not have the data to complete the calculation.
Is there a way to make the #DIV/0 error go away until I imput the data to complete the calculation? I was thinking there might be a way to do it with conditional formatting.
Sub Macro1()
With Range("A1")
.FormatConditions.Delete
.FormatConditions.Add Type:=xlExpression, Formula1:="=A1=B1"
.FormatConditions(1).Interior.ColorIndex = 3
.FormatConditions.Add Type:=xlExpression, Formula1:="=A1B1"
.FormatConditions(2).Interior.ColorIndex = 50
.AutoFill Destination:=Range("A1:A29"), Type:=xlFillDefault
End With
End Sub
If my active cell is NOT A1, the formula entered into conditional formatting is off. The range references get all messed up. For example, if my active cell is Say D5
Condition 1 is
=IT65533=IU65533
Condition 2 is
=IT65533IU65533
But if I run the code with A1 as my active cell, it gets entered correctly as
Condition 1
=A1=B1
Condition 2
=A1B1
I would like to add conditional formatting for the whole row based on whether the value of cells in column A is "CON".
For Each c In r
If c.Value = "CON" Then
c.EntireRow.FormatConditions.Delete
c.EntireRow.FormatConditions.Add Type:=xlExpression, Formula1:=c.Address = "OK"
c.EntireRow.FormatConditions(1).Interior.ColorIndex = 35
end if
next c
the "CON" is a formula and can later take the value "OK".
The conditional formatting should highlight the whole row as green when that happens.
I am not sure if this requires conditional formatting/vba function
If I enter something in cell A1 and leave blank in cell c1, in cell c1 it should print the message "Required Entry, Please Fill up". and this condition should be applied to entire column, where ever in column A there is some values and column c is empty this condition should apply.